Used Uteco Flexographic Printer for sale (2,804)

Condition: excellent (used), Year of construction: 2014, Offer for flexo press UTECO ONYX 808 gearless, 8 colors, year 2014 and 1280 mm width. Fully equipped. Pjdpoxf T Hljfx Akvora

Condition: used, offer for central drum flexo press FLEXOTECNICA NG10 from year 2009 with 1280 mm web width Predpfx Aksy Sfcnovoa

Condition: excellent (used), Great deal on a KBA 8-color flexo press + 1 in-line flexo unit. Manufactured in 2017, with a web width of 900 mm. Can be seen in operation and is in very good condition. Prjdpezlbxcefx Akvsa

Condition: excellent (used), For sale: F&K 16S flexographic printing press, 8 colors, manufactured in 2001, with a web width of 1100 mm, and equipped with a video camera from 2023. Prjdpfx Akszhgmwjvja

Condition: good (used), Altinisik Makina 1020 Flexographic Printer Pjdpfxszlahvs Akvjra The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Prodpfx Ajvakdzjkvoa Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Equipment & Features Podpfx Asxw S Ixskvjra Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Price Negotiable – €13,000 + €4,000 printer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, printer was rarely used at university which does not use it any more Predpfx Akjw Inrcevea

Condition: excellent (used), Year of construction: 2022, Oce Arizona 2380 GTF Flow (FineArt) LED Newest generation of Canon with flow technology Color: 8C CMYK lClM, 2 White GT format: 2.5m x 1.25m Only 13,500 m² printed Prjdpfozwdhdjx Akvea Speed up to 90 m²/h Automatic printhead cleaning Registration pins: pneumatic (easy loading) New user interface Flow technology for heavy materials such as glass... In top condition, like new.

Condition: refurbished (used), Year of construction: 2014, Vutek GS 5000 R, fully refurbished (always maintained under Vutek’s full-service program) Color: 8C + White Resolution: 12 pl / 1000 dpi Speed: up to 275 m²/h Includes: MESH/Textile Kit Trial roll: 1.6 m Psdpfx Asy U Hmaekvjra EFI Fiery server 3-month warranty

Condition: refurbished (used), Year of construction: 2020, efi Vutek Pro32R + LED Roll Printer 12 Ricoh Gen 5 printheads, 7pl UltraDrop technology Pedpfx Akezqgn Hsvsra Color: 4C + White (for overprinting and underprinting) Year of manufacture: 2020, installed Fully refurbished, with all printheads replaced with new ones Speed: up to 256 m²/h Printer has been completely cleaned: carriage completely overhauled, new printheads and tubes Filters and Matan firmware updated, etc.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. Predpfxszwn Tke Akvja No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction. Podpszwn Tdjfx Akvjra

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Pedjzd Rtaspfx Akvera

Condition: used, functionality: fully functional, machine/vehicle number: G7000046, Year of construction: 2021, operating hours: 12,000 h, Stratasys Objet500 dental printer Prodpszd Ruqefx Akvja Purchased in July 2021. Original price: €87,500 Regular maintenance performed by Stratasys. Maintenance reports available. Excellent condition, fully functional. All print heads are installed in the printer and are functional. Machine ready for pickup.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale the CNC UV DIGITAL PRINTER Mimaki Engineering Type: JFX500-2131 Year: 2014 in PERFECT working condition from small family business ! Pjdpozxbp Ujfx Akvera Maximum print area: 2100 × 3100 mm Head clearance (max. media thickness): up to 50 mm Maximum resolution: 1200 × 1200 dpi Print speed: up to 60 m²/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, • Realistic simulation of end products through the combination of different materials • Multi-material parts: Simultaneous application of different modeling materials • Mixed Tray: Production of various parts made of different materials in a single process step • Wide selection of FullCure® and composite materials: Photopolymer for model and support materials; dynamically generated Digital Materials™ • Numerous design and printing processes • Greater creativity through the use of multiple materials and composites with different material properties and color shades Prjdezw Emhjpfx Akvea • Highest quality and accuracy • High-resolution 16-micron layers guarantee smooth surfaces and fine details • 350x350x200 mm large build platform for the production of various parts and assemblies • Suitable for use in an office environment TECHNICAL DATA - Layer thickness (Z-axis): up to 0.016 mm - Build platform (X x Y x Z): 350 x 350 x 200 mm - Build volume (X x Y x Z): 342 x 342 x 200 - Resolution X = 600 dpi, Y = 600 dpi, Z = 1600 dpi - Printing modes Digital Material (DM): 0.03 mm High Quality (HQ): 0.016 mm High Speed (HS): 0.03 mm - Accuracy: 0.1 - 0.3 mm typical - Model materials FullCure 720, universally applicable and transparent Vero, opaque material DurusWhite, polypropylene-like material Tango, rubber-like elastic material ACCESSORIES Spare parts new replacement print head (new price approx. €1,000)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition Podpoyt Rk Ejfx Akvjra - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc Pjdpfx Aezqz Hwskvsra * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Pjdpfx Aksyaqttjvera

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. Psdpfewna R Ssx Akvjra The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Prsdjw Inpnopfx Akvoa

Condition: good (used), functionality: fully functional, Year of construction: 2016, overall weight: 600 kg, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, Stratasys Fortus 450mc for sale, Contruction year 2016, low operating hours The Stratasys Fortus 450mc is an industrial-grade FDM (Fused Deposition Modeling) 3D printer, widely used in aerospace, automotive, and medical device manufacturing for functional prototypes and end-use production parts. This unit has been operated in a professional production environment and is fully functional. Technical Specifications: Build envelope: 406 x 355 x 406 mm (16" x 14" x 16") Technology: FDM (Fused Deposition Modeling) Layer thicknesses: 0.005"(0,127mm) / 0.007"(0,178mm) / 0.010"(0,254mm) / 0.013"(0,33mm) Number of material bays: 4 - 2 model + 2 support Machine weight: approx. 600 kg Machine running on external Air pressure, to reduce machine noice. Internal air compressor can be purchased and installed. Materials/Licenses: ABS, ASA, PC, PC-ISO, PC-ABS, Nylon12, ULTEM9085, ULTEM1010, Antero. Included: - Fortus450mc + EU Transformer. Podpfxeznl N Rs Akvera - Support Removal Wash Unit (German Sonic Cleanstation UW90) Machine located in Roskilde, Denmark

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: Psdpszhr Rhjfx Akvora The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: Prodpfxeztn Dzo Akvja - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.