Used Vanicek Drying Chamber for sale (4,117)

Condition: used, Year of construction: 1994, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF Lhjdpfey Tt Eaox Akusg External dimensions: Length: 10.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 10.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1994 Inlet temperature: 95 degrees Fans: 7 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 1995, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 13.3 meters Width: 4.2 meters Height: 4.15 meters Ledpfx Ajy Tt Axekujhg Internal dimensions: Length: 13.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1995 Heating capacity: 205 kW Supply temperature: 90 degrees Water flow rate: 16 m3/h Fans: 9 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Lhsdey H I Ngjpfx Akuog Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Lhsdpfx Aksy Ny U Touog

Condition: good (used), gas burner for drum dryer. capacity 2.5 t/h Ledpfxjwh Ik To Akushg

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying Chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7,400 x 4,500 x 4,250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency converter With control system Ljdpfx Aksy Evkpsuohg Heating capacity: 223 kW Water temperature: 85 °C Water flow: 14 m³/h Voltage: 230/400 V Connected load: 12 kW Fans: 3 x 3 kW Control: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating not included! The drying chamber will be professionally dismantled and loaded onto a truck. Transport dimensions: 12 loading meters, approx. 5,000 kg

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 Lhsdpfxjyy R D To Akujg The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) Ledpfxju Tipko Akushg - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Lhsdpfx Aksvc Axpjusg Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1980, condition: ready for operation (used), An old drying kiln (approx. 40 years old) Brunner is available. External dimensions X/Y: approx. 6000mm/8000mm. On-site inspection is possible. Lhedovbigwepfx Akusg

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Ledpfxewxdqko Akushg Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Lhedpfx Akjtt Sy Rsusg Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Lhsdpfxoxgdrbj Akujg

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 4,850 kg, total height: 2,900 mm, total length: 10,000 mm, total width: 2,300 mm, Used wood thermal modification chamber. Made of high-quality materials, it ensures effective thermal modification. An ideal solution for wood processing professionals. The chamber was purchased new in 2021 from SUKHOVIY LLC, model KTMD 9. Very rarely used, it was decommissioned in 2023. The chamber modified spruce and pine wood, but also suitable for other species. Operation and thermal processing process are very simple; all you need is electricity and a water. The chamber has a retractable loading cart and a foldable frame that allows the cart to be rolled out. Basic parameters: - Total volume: 28.5 m³ - Load capacity: up to 10 m³ at a time - Power: 48 kW - Maximum power consumption: 260 kW/m³ - Minimum power consumption: 150 kW/m³ - Maximum internal temperature: 235°C - Dimensions (L x W x H): 10.0 x 2.3 x 2.9 m - Weight: 4,850 kg The chamber comes with an instruction manual in Polish and an EC Declaration of Incorporation. Lhodpfx Akex E Slveueg

Year of construction: 2013, condition: used, Drying chamber / Circulating air drying chamber / Wood drying chamber / Drying plant Mühlböck VLSM2120 External dimensions: Length: 7.1 meters Depth: 4.4 meters Height: 5 meters Lhedpswpfwyjfx Akuog Internal dimensions: Length: 6.4 meters Depth: 3 meters Height: 4.2 meters Technical data: Year of construction: 2013 Heating capacity: 102 kW Flow temperature: 90 degrees Water quantity: 6 m3/h Electrical connected load: 4 kW Fans: 3x1.1 kW optionally with wood chip heating system

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails 2 trolleys Ljdpfx Akoy Sbutoujhg dimensions: 2x 1900*3000*9150 2x 3kW fans Automatically controlled with adjustable drying programs

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Lhodpfx Akoy Ti Ecjuog Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Lodpfefzq Stjx Akuohg Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Lsdpfx Aeflmdbskujhg Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. Ljdpofy T Szsfx Akushg • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Mühlböck QLSF2120 Technical data: Year of construction: 2007 Heating capacity: 190 kW Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW Lhsdpfsy Sxw Eox Akuog

Condition: like new (used), Year of construction: 2019, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, type of input current: three-phase, temperature: 260 °C, inner dimension length: 1,250 mm, inner dimension width: 1,250 mm, inner dimension height: 2,000 mm, total length: 1,680 mm, total width: 2,120 mm, total height: 2,960 mm, fuel type: electric, Equipment: CE marking, We are offering this as-new Nabertherm KTR 3100 chamber dryer, year of manufacture 2019. The chamber dryers of the KTR series are suitable for a wide range of drying processes and heat treatments of batches at application temperatures up to 260 °C. Thanks to the powerful air circulation system, optimal temperature uniformity is achieved within the usable space. - Tmax 260 °C - Electrically heated (via heating registers with integrated stainless steel heating elements) - Temperature uniformity in accordance with DIN 17052-1 up to +/− 3 °C (for models without drive-in tracks) Ljdpfx Ajy R Tbijkujhg - High-quality mineral wool insulation, resulting in exterior wall temperatures < 25 °C above ambient temperature - Exclusive use of insulation materials not classified according to Regulation (EC) No 1272/2008 (CLP). This means that no aluminosilicate wool, also known as RCF fiber, is used, which is classified and possibly carcinogenic. - High air exchange rate for rapid drying processes - Double-leaf door - Adjustable temperature limiter with selectable shut-off temperature as overtemperature protection for both the oven and the goods - Intended use according to the operating manual If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, power: 1.5 kW (2.04 HP), input voltage: 400 V, total length: 600 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 300 kg, pressure: 9.8 bar, tank capacity: 50 l, warranty duration: 12 months, HySpriz RK50U 3-in-1 Forming System for Meat Snacks, Pet Sticks & Mini Salami | Up to 1500kg/shift Made in Ukraine. 18 month full warranty. RK50U — universal casing-free forming system for meat sticks, jerky & sausage production HydroShpriz RK50U is a powerful piston-driven filling and forming machine engineered for small and mid-size manufacturers starting production of meat sticks, salami snacks, pet food, kibbeh, fruit bars, and more. Ideal for dry-cured snacks without alginate casing. Strong, compact, and easy to operate — it’s the perfect choice to start your line and grow with Trade-In options. ⸻ Technical specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • External dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: full stainless steel, food-grade • Certification: CE certified, built for continuous 8-hour production cycles Lodpfx Asmrpvyjkujhg ⸻ Configuration & possibilities • Gearbox-driven filler for thick and sticky emulsions down to –2 °C • Multi-nozzle head: up to 25 lanes simultaneously • Round nozzle set: 8 mm to 22 mm for meat or fish sticks • Flat nozzle set: 25 mm to 200 mm width, 3–5 mm height — ideal for jerky/strips • Sausage stuffing set: for traditional casing sausages • Overhead tray holder: for direct forming onto drying racks • Trolley integration: fits perfectly with our 30-row drying racks (60 trays) • Integrated time-based portioning unit with ±8% accuracy • 24V remote signal: compatible with automatic clippers (PolyClip, Compa, etc.) • Optional vacuum connection: for better product density and shelf-life ⸻ Production capacity • From 20 kg to 1,600 kg per 8 hours depending on product shape, tray format and nozzle type ⸻ Availability ✔️ In stock at official distributors in: • Austria • Poland • United Kingdom • Lithuania • Australia • South Africa • United States Delivery worldwide. Training, test batch, and spare parts included. ⸻ Made in Ukraine. CE sertified industrial forming system • meat snack production • pet food production • jerky, salami, kebab machine • food processing equipment

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. Lhedpeua D U Iefx Akujg A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), fuel type: electric, Equipment: CE marking, documentation/manual, Industrial Heat Treatment Furnace – 17 m³ | 400°C | Siemens PLC | Like New Price: €104,100 (approx. 38M HUF) Location: Hungary High-performance industrial heat treatment furnace in excellent condition, designed for precise and reliable thermal processing across multiple industries. Commissioned in April 2024 – only 150 operating hours. Key Specifications • Chamber volume: 17 m³ • Max temperature: 400°C • Temperature uniformity: ±5°C • Heating power: 90 kW (electric) • Control: Siemens PLC with touchscreen • PID temperature control • Recipe storage & data logging • 8 temperature sensors • Fresh air & exhaust system • Frequency-controlled fans • CO₂ fire suppression system • Dual-side door access Applications • Wood heat treatment (thermowood) Lhjdpfx Akjy Izkmjujg • Furniture and parquet production • Composite curing • Coating / paint baking • R&D applications Advantages • Industrial-grade performance • Excellent temperature precision • Energy-efficient insulation • Fully automated operation • High safety standards ✔ Available immediately ✔ Inspection under power possible ✔ Dismantling and loading support available