Used Variable Angle End-Milling Machine for sale (72,356)

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm Ledpfohyuglsx Agrort - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Lrjdpfx Agexxb Rrjrot Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Lodox D Tbmopfx Agrert Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), functionality: fully functional, Internal article number: 26007 Lrsdpfszb Ni Aex Agrot Universal milling machine Deckel FP1 Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Connection power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed rate: Continuously variable, 5-500 mm/min Rapid traverse function: Not operational! The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR Lrsdpfxjz Eh Egs Agrot SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: new, Year of construction: 2020, End Milling Machine – Pertici ML200A - Brand new – Year 2020 The ML200 by Pertici Industries is an automatic vertical-axis end milling machine designed for processing aluminium and PVC profiles. The machine allows machining operations with angles from 90° to 22.5° and from 90° to 157.5°, ensuring precision and reliability during end milling operations. Heavy-duty electro-welded steel structure with high-rigidity cast iron bench, complete with sliding milling unit on precision-ground guide rods. Equipped with: Quick pneumatic cutter change system Lubrication system 5 pneumatic clamping cylinders Three-phase motor 1.4 / 1.9 kW – 1400 / 2800 rpm Oil-pneumatic feed system for the milling unit Adjustable feed speed Profile support with vertical and horizontal clamps Anti-vibration feet User and maintenance manual Ideal machine for professional aluminium and PVC window and door manufacturing. Technical specifications: Motor power: 1.4 / 1.9 kW Power supply: 400V – 50Hz – Three-phase Motor speed: 6700 / 3350 rpm Maximum tool diameter: Ø 250 mm Tool bore: Ø 32 mm Maximum profile height: 130 mm Maximum profile width: 350 mm Maximum machining height: 145 mm Required air pressure: 6 – 7 bar Lsdpoy N S Ulsfx Agrort Air consumption: 30 L/min Machine dimensions: Length (a): 1020 mm Height (b): 1700 mm Depth (c): 1410 mm Weight: 310 kg

Condition: excellent (used), IM Very good condition. Lodpfx Agsv Air Aersrt

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg. Lsdpfx Agez Dg H Hsrsrt

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device Lrjdotq Takopfx Agrjt - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: excellent (used), Type AKF 6/250 Motor 400 V / 3.0 kW Speed 4500 rpm Cutter Ø 250 mm Ledsuf E R Iepfx Agrsrt Cutter holder shaft Ø 40 mm Milling width 305 mm Milling depth 80 mm Suction nozzle 80 mm Weight 210 kg

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps Lrjdpfx Agjr Iiimsrot - Mist lubrication system - depth adjustment - 400V

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Ledpfx Aett Eb Sogrjrt Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Lrjdpezuxn Tsfx Agrot For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Feed of the milling head manually - Work table height adjustable via handwheel Lrsdpfx Aof E Higsgrst - Horizontal and vertical material clamping - Milling cutter diameter up to 250 mm - Max. milling height 150 mm - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable stop, left and right 20 - 90° - Milling spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table stand - Space required approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 289, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, feed rate X-axis: 1,100 m/min, feed rate Y-axis: 1,100 m/min, spindle speed (max.): 2,800 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, total height: 2,245 mm, total width: 2,470 mm, table width: 700 mm, table length: 1,200 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 45 rpm, table load: 1,500 kg, overall weight: 3,700 kg, input voltage: 400 V, workpiece weight (max.): 1,500 kg, distance table to spindle center: 775 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, Universal vertical boring and milling machine BoKö MF1, from a model-making workshop. In good, fully functional condition. Primarily used for processing plastics. Lrodpfsz Ehbuex Agrst Rotary table for workpieces with a diameter of up to 1900 mm. Retrofitted 3-axis digital display. All original documents since purchase are available: scope of delivery, circuit diagrams, technical drawings, brochures, price lists, etc.

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Lsdpfxjxy Stys Agrsrt Weight: 61 kg In good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° Lrjdpoznn Hlsfx Agrst - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Ljdpfx Ajy Ni Ivegrert Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Lrjdpoghl Emefx Agrst Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Condition: used, Year of construction: 1997, functionality: fully functional, total height: 4,000 mm, total width: 5,000 mm, total length: 5,000 mm, overall weight: 16,000 kg, ANAYAK FBZ-HV-2000 – CNC Bed Milling Machine Manufacturer: ANAYAK – Industrias Anayak S.A., Spain Model: FBZ-HV-2000 Machine Type: CNC Bed Milling Machine / Universal Bed Milling Machine Year of Manufacture: 1997 Condition: Used Technical Data • Travel X: 2,000 mm • Travel Y: 935 mm • Travel Z: 1,000 mm • Table Dimensions: 900x • Spindle Taper: ISO 50 • Spindle Speed: 60 - 3000 rpm • Control System: CNC Control HEIDENHAIN TNC 426 • Feed Rate X/Y/Z: 1 - 3000 mm/min • Rapid Traverse: 10 m/min • Universal Milling Head: Yes • Coolant System: Yes • Chip Conveyor: Yes Ledpfx Asz Epz Asgrort • Electrical Connection: 50 kW • Machine Weight: 16,000 kg Documentation available ANAYAK FBZ-HV-2000 CNC Bed Milling Machine, year of manufacture 1997. Working area X 2,000 mm. Inspection possible by appointment. Sale from current location.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Lrsdpfx Aeyahv Sjgrjt Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), Year of construction: 2003, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,200 mm, total width: 2,000 mm, total length: 2,250 mm, type of input current: AC, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, table load: 250 kg, overall weight: 2,200 kg, input voltage: 400 V, space requirement height: 2,400 mm, input current: 8 A, input frequency: 50 Hz, Equipment: documentation/manual, Due to restructuring measures, we are selling our conventional milling machine – Intos FNGJ 40. - Year of manufacture: 2003 - Good condition for its age - Work table: 800(X) x 400(Y) mm - Travel ranges: X 600 x Y 400 x Z 400 mm - Spindle: 63 – 3,150 rpm - 4 kW via gearbox - Driven axes: X, Y, and Z (feed and rapid traverse) - 3-axis Heidenhain digital display - Stable machine with solid guides - Weight: 2.2 tons - Identical in design to EMCO (these were later manufactured at the Intos plant) - Fully functional - Various tool holders, vises, etc., can be purchased depending on the agreed price - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made without any warranty. Collection only (EXW) – no shipping. Lsdpfoz Afddjx Agrjrt

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Ljdpfx Aozmt U Eogrsrt

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Deckel FP4M universal milling machine in excellent technical and optical condition. Lrjdpfxjz Atxvj Agrjt Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake - Automatic feed: X-Y-Z steplessly adjustable 6.3 / 630 mm/min - Rapid traverse X-Y-Z 1300 mm/min - Fixed angle table - Vertical quill, 90 mm travel - Tool holder ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head Includes cabinet with accessories.

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Lredpfow Ip Dgsx Agrst Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”