Used Vem Two-Arm Drill for sale (16,264)

Condition: good (used), two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 1150 W -Connection: 230 volts -Max. drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg Gusdpsb A N H Njfx Ahzed

Condition: good (used), two-armed drill, rotary drill, magnetic drill, impact drill, two-hand drill Gsdpfxsfc Hf Aj Ahzeud -Taper: MK with drill chuck -Nominal consumption: 250 W -Connection: 220 volts -Max. Drill: Ø 15 mm -Dimensions: 420/420/H120 mm -Weight: 7.1 kg

Condition: excellent (used), two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm Gedpfx Aheb E Aq Sozjud -Weight: 17 kg

Condition: good (used), two-arm drill, rotary drill, magnetic drill Gjdpfxjb A N H Uj Ahzeud -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg

Condition: good (used), two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm Godob A Rimjpfx Ahzeud -Weight: 5.5 kg

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gedszi S Snspfx Ahzjud

Condition: good (used), Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear Gusdpfx Aec Rpnnjhzjd -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t. Godpfeu T Ty Hjx Ahzsud

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Gusdoy Rznwepfx Ahzsd Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Gujdpfxjyrdplo Ahzsd Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Gedpjyub Spsfx Ahzeud Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Godpfx Ajx Sx D Sshzoud Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw Gujdpom Sg R Defx Ahzed spindle speed 22 - 2000 rpm Weight 2 to

Condition: ready for operation (used), large gripper triple transport 6 mm needle spacing fully mounted on a base frame Gsdpfx Aod A Rvrshzsud with coupling motor 220 V

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical specifications: - Drilling capacity in steel 28 mm - Thread cutting device - Drill spindle mount MK 3 - Drill spindle stroke 160 mm - Table dimensions approx. 750 x 500 mm - Overhang up to approx. 620 mm - Vertical stroke of the arm 600 mm - Column diameter 250 mm - Spindle speeds in 12 steps 80 - 2800 rpm - 3 feed rates 0.1 + 0.15 + 0.25 mm/rev - Drill spindle drive 400 V / 5.5 kW - Coolant system - Space required approx. W 1100 x H 1550 - 2150 x D 950 mm Gsdpfxeb Ennkj Ahzsud - Weight approx. 1200 kg - Operating manual

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm Gusdpfx Aewf Iqnohzsd - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Guodpjlhwr Refx Ahzod Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 501 PVC KOL YERİ DELME KANAL AÇMA SU TAHLİYE MAKİNESİ, functionality: fully functional, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of PVC profiles. - Ability of copy head to work on vertical axis - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility to operate triple drilling copy milling cutter or grooving system as one - Comfortable working thanks to the powerful motor - Right conveyor system (1 meter) Gjdpfsramz Aex Ahzeud

Condition: like new (used), Year of construction: 2012, AGIECHARMILLES drilling EDM machine, model DRILL 20, manufactured in 2012. Travel: X 300, Y 200, Z 300. Maximum drilling depth: 200 mm. Table: 400 x 300 mm. CNC unit with 12" TFT touchscreen. Sequences drilling points until the electrode is used up. Maximum workpiece weight: 300 kg. Gsdpszd D Rrjfx Ahzoud 30A generator. Electrode diameter: 0.1 - 3.0 mm. Dielectric pump pressure: 70 bars. Dielectric tank capacity: 16 liters.

Condition: ready for operation (used), Gear-driven pillar drilling machine IBARMIA B 70 -Drilling capacity / steel approx. 70mm -Morse taper MK 5 -Spindle stroke / drilling depth approx. 270mm -Speed range 62-1120 rpm (12 gear stages) -Automatic feeds - 6 stages (0.1-0.6 mm / revolution) -Spindle overhang - column 425mm -Table size approx. 770x660mm -Round column -Right / left rotation -Threading device -Coolant system Gjdpozi E Tfofx Ahzsud -Work light -Motor power 5.6 KW -Emergency stop -Various tools / drill chucks / quick-change holders incl. inserts -Documentation Dimensions: L x W x H 1.1 x 0.7 x 2.7 meters / Weight 1900 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Offered is a Vemag water casing holder for Vemag Robby, HP in good used condition. Workshop tested. Guodpfx Ahjw Tnh Iezed Further information upon request. Cash payment or prepayment. Sale only to commercial customers. No guarantee, no warranty.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 11 kW (14.96 HP), Fully functional electric motor. Previously installed in a surface grinding machine. The shaft runs true (see photo). Gusdpfx Ahezk Utkszsd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Godjw Hdg Uepfx Ahzoud Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: used, machine/vehicle number: IDC000242, total length: 4,000 mm, total width: 1,000 mm, power: 4 kW (5.44 HP), Vibro conveyor with screen Lenght: 4 m Gujdpfxozi Rubj Ahzsd Width: 1 m Electric motor: 4 kW Screen eye: 3×5 cm

Condition: good (used), Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Shaft: 38 mm -Design: B5 -Protection rating: IP54 Guodjb Enb Hjpfx Ahzed -Quantity: 1 available -Dimensions: 510/290/H330 mm -Weight: 86 kg