Used Vertical Drilling Machine for sale (66,800)

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Delayed removal unit will be ready for removal by the end of September. Bedpfxjz Hb U Rj Ahmswu Buyer responsible for removal, contractor must be licensed and insured.

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm X-axis: 3000 mm Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction. Bwsdpfx Asfmdcqohmeu Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Bwsdpfxsz Ahx Ds Ahmsu Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Bjdpey At Iyjfx Ahmswu Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand Bwsdozz Rpvspfx Ahmsu + 3 spindles to be revised

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Weight 45,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured. Bedpfx Aez Hc Npshmowu

Condition: used, Vertical drilling machine with 2 adjustable spindles. Maximum drilling width 440 mm Bwodpfszxg Dwox Ahmou Minimum drilling width 250 mm Maximum depth 250 mm Engine power hp. 2

Condition: excellent (used), Year of construction: 2014, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Bjdey Nltnjpfx Ahmjwu Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, Bodpfx Ajz Eh Nljhmjwu 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, Vertical drilling machine with 2 spindles, tested, working. Bodpfx Ajzxg Ayohmjwu 2-pindle vertical drilling machine, tested, working.

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups Bedpfxsytr Eds Ahmewu

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Bwedpfxszy N E He Ahmeu Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: M500.06133, overall weight: 15,000 kg, Emag VSC500 Vertical Turning Machine. Condition Good. Bsdpoz Hc Nvsfx Ahmjwu Weight 15,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Bwsdpjzb A Rgsfx Ahmsu

Condition: used, 2-spindle vertical drilling machine Bwedeyg Ix Tspfx Ahmju

Condition: used, Comec 3-spindle vertical drilling machine Bwsdpfxey S Adis Ahmsu Maximum piece length 100 cm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Bwodez Ahw Hjpfx Ahmou Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Bodpfx Asyfrvyjhmowu Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Bodez Ekb Djpfx Ahmswu Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Bwsdpjz Ahxqefx Ahmou Control system: Siemens

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm Bwsdpjz Epg Ejfx Ahmou MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Blum laser 2 extraction systems Machine hood

Condition: excellent (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece weight (max.): 600 kg, table load: 600 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, coolant supply: 12 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bertikales BAZ DMG MORI CMX 600 Year of manufacture: 2019 Bwsdpfx Aez Ihumohmju Control system: DMG MORI SLIMline® Multi-Touch control Operating hours: 19,200 h Spindle hours: 9,200 h Coolant pressure: 12 bar Technical data: Spindle speed: 10 - 12,000 rpm Drive power: 9/13 kW Torque: 54/80 Nm Tool holder: SK 40 Number of magazine positions: 30 Travel ranges: X-axis: 600 mm Y-axis: 560 mm Z-axis: 510 mm Direct path measuring system in all axes Production package 1

Condition: good (used), Year of construction: 2005, operating hours: 108,310 h, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Year of manufacture: 2005 Heidenhain iTNC 530 Machine runtime: 10,831 hours, Spindle runtime: 34,700 hours - Manual swivel/clamping milling head - Main spindle: 18,000 rpm - SK 40 - 16 tool positions Bwodpfxjyhv Eqj Ahmsu - Swiveling table - Standard coolant system - Chip tray - Sight windows - German documentation - Heidenhain measuring probe - Electric hand control module - Chip flushing gun - Blow-off device - Central compressed air supply - U 740 with fixed table The machine is fully functional and can be tested on-site at any time!

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Bedpezi Awhjfx Ahmewu Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2013, operating hours: 9,300 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 520 mm, controller manufacturer: fanuc, table width: 400 mm, table height: 400 mm, table length: 1,000 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine is powered on and can be demonstrated. The measuring probe and tool measurement system are included. Bodpfoz Iifmox Ahmewu