Used Vertical Machining Center Vmc 650 for sale (70,393)

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm Pjdpfx Aexc I Dgog Degk

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Pgsdpoyl Svasfx Ag Dok Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Pgedpfxsyy R Hzs Ag Djk Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Pedpfxsquhbge Ag Dsgk Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel Pgodpfxjw Ed U Ne Ag Dek - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Pjdpfxow Nklhs Ag Djgk Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Pedpfxotrhq He Ag Dogk Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Year of construction: 1997, functionality: fully functional, We offer an nice condition Matsuura with tools and accessoriess, very atractive machine for a serious work. Description Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. Spindle Chiller WASTE CONVEYOR with Yasnac i80M Control 20 Position: ATC BT40 : Taper Pgjdpfxovkx Rke Ag Dsk Specifications Manufacturer MATSUURA Model MC600VF Year 1997 Condition Used Serial Number 970112285 Table size 870 x 400mm Coolant tank X = 600 Y = 410 Z = 470mm Spindle speeds 30 – 15000 rpm.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M242-06206013CFA, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table length: 760 mm, TECHNICAL DETAILS Travel X-Axis: 610 mm Travel Y-Axis: 508 mm Travel Z-Axis: 610 mm Pjdpfx Agjy Dglns Djgk Spindle Nose to Table: 152 - 762 mm Table Clamping Surface: 760 x 510 mm T-Slots (DIN 650): 5 x 18 H8 x 100 Table Load Capacity (evenly distributed): 1,500 kg MACHINE DETAILS AC Voltage: 400 V Phases: 3 Frequency: 50 Hz Connected Load: 18 kVA Largest Motor: 7.5 kVA

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,672 h, functionality: fully functional, machine/vehicle number: 1237361A51A, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: Fanuc 0-MD, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 430 mm Travel Z-axis: 570 mm Table length: 650 mm Table width: 450 mm Tool holder: BT40 Main spindle power: 15 kW Max. spindle speed: 10,000 rpm Number of axes: 3 MACHINE DETAILS Control: Fanuc 0-MD Tool magazine: 24 positions Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,200 x 2,450 mm Net weight: 9,000 kg Pgsdpey Avucsfx Ag Dok Shipping units: 2 Operating hours: 13,672 h Power consumption: 11 kW EQUIPMENT External cooling system Chip conveyor Pallet milling machine Spindle cooling Changeover table Tool magazine Note: The robot shown in the video is not included in the scope of delivery or sale.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,360 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X axis: 1,016 mm Pjdey A Ip Sspfx Ag Djgk Travel Y axis: 660 mm Travel Z axis: 635 mm Max. spindle speed: 12,000 rpm Spindle power: 22.4 kW Table size: 1,372 x 610 mm Max. table load: 1,360 kg Rapid traverse X axis: 30 m/min Rapid traverse Y axis: 30 m/min Rapid traverse Z axis: 30 m/min MACHINE DETAILS Control: HAAS CNC control Tool changer: 20 + 1 positions Tool holder: SK40 EQUIPMENT Documentation/manual Chip conveyor Tool changer Coolant system Work area lighting Electronic handwheel Network / USB interface

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Pgsdpsy Dgy Ejfx Ag Dsk Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Psdpfx Ajy E Hqtjg Dogk Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

Condition: used, Year of construction: 2021, EMAG VMC 450 MT Mfd. 2021 Control: Siemens 840D SL Machine has no production hours Description CHUCK DIAMETER: 24" MAX WEIGHT: 1100 LBS. MAX SWING DIAMETER: 31" MAX TURNING DIAMETER: 23.5" X STROKE: 30" Z STROKE: 19" MAIN DRIVE: POWER: 100 HP FULL POWER AT 800 RPM MAX SPINDLE RPM: 2,000 C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES FEED DRIVE: RAPIDS Z / Z: 60 / 30 M / MIN. FEED FORCE X / Z 4 / 15 kN BALL SCREW DIAMETER X / Z: 40 / 50 MM MILLING SPINDLE: POWER: 100 HP MAX SPINDLE SPEED: 7000 RPM SPINDLE TAPER: CAPTO C8 TOOL MAGAZINE: 60 Podpfx Aeyzkdveg Degk EQUIPPED WITH: MINERALIT MACHINE BED SIEMENS 840 D SL FULL ENCLOSURE LEVEL PADS TURN MILL DRIVE EMAG WORKPIECE CORRECTION SYSTEM EMAG OPERATING AND SETTINGS MASKS EMAG REMOTE DIAGNOSIS Y AXIS B AXIS +/- 95 DEGREE 1000 PSI COOLANT THROUGH TOOL X-AXI CLAMPING FOR GEAR TOOTH FORMING SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE LIFTING PUMP PAPER FILTER LOW PRESSURE COOLANT HIGHT PRESSURE COOLANT 1000 PSI PROGRAMMABLE COOLANT PRESSURE COOLANT MIST EXTRACTOR AIR BLAST CHIP FLUSH QUALITY CONTROL: WIRELESS GAUGING CALIBRATION BLK FOR PROBE TOOL GAUGING - BLUM LASER

Condition: used, Spinner MICROTURN 52 LTBS Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles AUTOMATION READY - MC0122 Less than 300 hours No bar feed Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling Chucks etc. included Yes Coolant: used Water Based What kind of facility is it in? R and D for performance parts for injector and turbos Specifications Work Area: Swing Diameter: 23.9 in (608 mm) Turning Diameter (max): 5.9 in (150 mm) Turning Length(max): 9.8 in (250 mm) Travels: X: 23.6 in (600 mm) Z:13.8 in (350 mm) Y1 Turret: +/- 1.9 in (50 mm) Y2 Milling Spindle: +/- 1.9 in (50 mm) B Rotary: 180 degrees Feedrate: Rapid Traverse X: 944.8 ipm (24 m/min) Rapid Traverse Y: 590.6 ipm (15 m/min) Rapid Traverse Z: 944.8 ipm (24 m/min) Spindle #1 Left / #2 Right: Podpfx Asyzkdcsg Dogk Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining. Spindle Bore Capacity: 52mm (2.0 in) Speed: 5,200 rpm Performance (S6 40%): 22.1 hp (16.5 kW) Torque (S6 40%): 81.1 ft-lb (110 Nm) Spindle Nose: DIN 55026-A6 B-Axis Milling Spindle: Speed (max): 12,000 rpm Performance (S6 40%): 12 hp (9 Kw) Torque (S6 40%): 15.4 ft-lbs (21 Nm) Swivel Angle: +/- 180 degrees Positional Measurement: Rotary Encoder Clamping: Hydraulic Turret: Stations: 12 / BMT45 Live Tooling Speed: 8,000 rpm Performance (S3 25%): 5.8 hp (4.3 kW) Torque (S3 25%): 10 ft-lb (13.6 Nm) Tool Magazine: Station Quantity: 72 Holder Type: HSK40 Tool Length (max): 4.1 in (105 mm) Tool Diameter (max): 3.5 in (88 mm) Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm) Size & Electrical: Technical design according to CE standards. Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm) Machine Weight: 16,976 lbs (7,700 kg) Operating Voltage: 3 x 400V (+/-10%) Main Frequency: 60 Hz (+/- 2%) Electrical connection: TN network (5-wire) Standard Equipment • 72-station tool magazine mounted on top of the machine • Hydraulic spindle brake on spindle 1 • Hydraulic spindle brake on spindle 2 • Spindle rinsing on spindle 1 (switchable between coolant or compressed air) • Spindle rinsing on spindle 2 (switchable between coolant or compressed air) • CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • Linear tool slide with coolant supply • Signal lamp • Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min • High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar) • Renishaw tool probe for measuring tools in the X/Y/Z axis • Preparation for mist collector unit • Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access. • UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals: • Safety signals (emergency stop/door signals, etc.) • Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description CNC Control System

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 Pjdjyfh Ixepfx Ag Dogk X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2002, HAAS VF10 X AXIS 3048 MM Pjdpoy Epkmofx Ag Dogk Y AXIS 813 MM Z AXIS 760 MM TABLE WEIGHT MAX 1800 KGS 3 AXIS HAAS CONTROL THIS IS ALL THE DETAILS I HAVE AT THE MOMENT MORE WILL FOLLOW CHEAP MACHINE - MUST BE LOADED FROM SITE AND STRAIGHT ON TO NEW DESTINATION . MORE PHOTOS AND A VIDEO IS AVAILABLE

Condition: used, Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, 2019 Brother Speedio M140 X2 (5 Axis 4+1) Plus 2019 Brother Feedio. Brother M140 CNC Machining Centre – 5 Axis – Available Immediately. The Brother M140 CNC machining centre is a compact, high-speed 5-axis machine designed for precision component manufacturing. Built in 2019, this machine offers excellent productivity with a high-speed spindle, 22 tool capacity and through-spindle coolant, making it ideal for subcontract machining environments. The machine has a full service history and is available immediately for inspection. Machine Details Machine: Brother M140 CNC Machining Centre Year: 2019 Control: Brother C Control Axis Configuration: 4+1 / 5 Axis Tool Capacity: 22 Tools Spindle: 16,000 rpm Face & Taper Through Spindle Coolant: 35 Bar CTS Equipment & Options Rear exit swarf conveyor NOP pumps for washdown and flood coolant Bag filtration system Air bench mist extraction Pgjdpfxsy Ewf Uo Ag Dok Additional Information Full service history High-speed machining capability Feedio Robotic Machine Tending System with ABB 6 Axis Robot – Available Immediately The Feedio robotic machine tending system is an automated loading and unloading solution designed to improve productivity and reduce manual handling in machining environments. Built in 2019, this system is equipped with a 6-axis ABB robot and twin-head loading capability, allowing efficient automated part handling. The system includes 4 metre conveyors and is suitable for integration with CNC machines for fully automated component loading and unloading. System Details System: Feedio Robotic Machine Tending System Year: 2019 Robot: 6 Axis ABB Robot Conveyor Length: 4 Metres Loading System: Twin Head Load / Unload Features Automated machine loading and unloading Twin-head handling for increased efficiency 6-axis robotic flexibility Integrated conveyor system for part flow Ideal for CNC production automation This system is well suited for subcontract machining environments looking to increase automation and production efficiency. For further information, pricing, or to arrange an inspection, please get in touch.

Condition: good (used), Year of construction: 2007, Traverses X Y Z: 1270 x 660 x 635mm, Table 1321 x 584mm, Spindle Speed 0 – 7500rpm, Spindle taper BT 40, Spindle Motor 20Hp, HAAS Control, Podpfx Agjy Eyauj Djgk 20 Station tool change, coolant

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 610 x 508 x 610mm, Table 762 x 508mm, Spindle speed 40 – 8000 rpm, Spindle taper CAT40, Pgedpfx Asy Ex Hasg Dek 24 ATC, Rapid feedrate 24/30m/min, Spindle motor power 12/9kW, Low volt light, Hurco control, coolant.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining centre Mori Seiki Type NV5000 Pgsdpfx Aey Hq Rgog Djk Year 2006 3 phases CNC Fanuc

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z 3048 x 1016 x 762mm, Table size 3048 x 711 mm, Maximum workpiece weight 1814 kgs Pgsdjy Emyuepfx Ag Dsk Spindle speed 8,100rpm, Spindle taper BT40, Motor 30HP, Haas control, 30 station ATC

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SMK00004, SPECIFICATION X Travel 1020mm Y Travel 610mm Z Travel 620mm Table size 1200 x 600mm Spindle to table 140 – 760mm Spindle speed 12,000rpm Spindle motor 15kW Spindle taper BT40 Tool magazine capacity 24 Machine weight 8000Kg Footprint (W x D x H) 3650 x 2900 x 2900mm approx. Pedpfoy E I A Dsx Ag Dogk MACHINE EQUIPPED WITH: - Siemens 840D CNC control (with Shopmill) Swarf conveyor 4th axis Renishaw tool setting probe Through spindle coolant system Lighting Enclosed guarding

Condition: like new (used), Year of construction: 2018, operating hours: 11,010 h, functionality: fully functional, machine/vehicle number: 0696, travel distance X-axis: 900 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain, table load: 400 kg, rotary table diameter: 520 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 11,010 h, spindle motor power: 35 W, input voltage: 230 V, KOVOSVIT MAS MCV 1000 5AX (S) CNC Machining Centre Pedjyt Nw Rspfx Ag Djgk We are selling the machine as we need to free up space in the factory. Vertical 5-axis simultaneous machining centre. High precision for complex parts and 3D machining. Tilting/rotary table enables complete machining in a single setup. High-speed spindle for efficient production. Heidenhain CNC control, ideal for precision work.

Condition: like new (used), Year of construction: 2009, operating hours: 20,929 h, functionality: fully functional, machine/vehicle number: 23500, travel distance X-axis: 3,320 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain, table width: 3,400 mm, table length: 700 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 20,929 h, input voltage: 230 V, We are selling the machine because we need to free up space in the factory. CNC Machining Centre TVMC-3000 (L) Table: up to 3400 × 700 mm (maximum load 4,000 kg). Travel X/Y/Z: up to 3320 × 710 × 610 mm. Spindle: BT40 taper, speed up to 14,000 RPM. Automatic tool changer: 24 positions. Rapid traverse: up to 30 m/min. Pgedpfxeyt Np To Ag Dok Precision: positioning ±0.005 mm / 300 mm. CNC control available: Heidenhain.