Used Vestas Wind Turbine for sale (1,796)

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Pgsdpfeywlpxjx Ai Tou

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Year of manufacturing: 2010, Unused Psdpfxetub Dzo Ai Tjgu Dimensions LxWxH (mm) 2400 x 1450 x 1700 Weight (kg) ca 6900 Total quantity in stock 3 Country of origin Germany Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm

Condition: good (used), Equipment: 3rd hydraulic function, ATP certification, *Title:* HYTORC B10-ST4 Vestas Set + RS12 Stealth Power Head + ENERPAC Pump - with documents - TOP *Description:* Selling a complete HYTORC hydraulic torque wrench set for Vestas wind turbines from a private collection. *Scope of delivery:* - 1x HYTORC STEALTH Power Head RS12 / RSL2-70A (1000 series) - 3x HYTORC B10-ST4 cassettes 46mm - TIGHTEN - Vestas No. VT20019281 - 1x ENERPAC hand pump P-series 700 bar with hoses Psdpfxs Aazbde Ai Tjgu - All documents / calibration certificates available - ready for immediate use in wind farm service Condition: Used, fully functional. No case included. Private sale from Hungary - shipping within the EU is possible. *Price: 7,000 EUR negotiable*

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, HOWDEN KK&K TWIN CA46 steam turbine with generator – 1.6 MW – NEW NEW | Never installed | Inspected by HOWDEN in July 2026 | OEM warranty reconfirmed | Immediate availability Available for sale: an industrial HOWDEN KK&K TWIN CA46 steam turbine, complete with a synchronous electrical generator, with a maximum electrical power of 1,595 kW (approximately 1.6 MW). The machine is NEW, never installed or commissioned, stored in a closed environment, and complete according to the original HOWDEN supply. Pgodpj Afhgwefx Ai Tju Originally intended for an industrial project that was subsequently modified, it is now available for immediate delivery, without waiting for the production time of a new unit. HOWDEN INSPECTION AND WARRANTY On July 27–28, 2026, the turbine underwent a new inspection by the manufacturer, HOWDEN, who subsequently reconfirmed the official warranty until November 22, 2027. Original technical documentation and inspection photographs are available upon request. ECONOMIC TERMS – 40% DISCOUNT Reference value of the supply: €1,500,000 CURRENT PRICE: €900,000 The 40% reduction is motivated by the company’s need to free up the space occupied by the machine, following the modification of the original industrial plans. COMPOSITION OF THE SUPPLY HOWDEN KK&K TWIN CA46 steam turbine on a skid Integrated 3-shaft gearbox Synchronous electrical generator, supplied separately Lubrication and oil control system Control, control, and protection panels Original HOWDEN regulation and safety systems MAIN TECHNICAL DATA Turbine: Double-body HP + LP configuration Controlled steam extraction between HP and LP HP inlet pressure: 16 bar(a) HP inlet temperature: 400 °C HP steam flow rate: 10,000 kg/h LP inlet pressure: 2.4 bar(a) LP outlet pressure: 0.3 bar(a) Maximum mechanical power: 1,658 kW Maximum electrical power: 1,595 kW Gearbox outlet speed: 1,500 rpm Generator: Three-phase, brushless synchronous Rated power: 1,994 kVA Voltage: 6 kV Frequency: 50 Hz Air-cooled, IC31 Parallel operation with the grid Included systems: Oil system with main and auxiliary pumps Electronic regulator SC901 Siemens SIPROTEC 5 protection panel Independent overspeed protection Steam pressure and extraction control PROFINET interface ENC-RfG simulation model MAIN APPLICATIONS Biomass and waste-to-energy plants Industrial cogeneration (CHP) Revamping and repowering of existing plants STATUS AND CONDITIONS OF SALE Year of manufacture: 2024 Condition: NEW, never installed or started Last HOWDEN inspection: July 2026 OEM warranty reconfirmed until 11/22/2027 Immediate availability Location: Piedmont, Northern Italy Conditions: EXW – ex works Visit and inspection of the machine by appointment PRICE: €900,000 (–40% compared to the reference value of €1,500,000) Original HOWDEN technical documentation and documentation of the latest inspection are available for interested buyers.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KT 615-7, pressure: 15 bar, power: 1,700 kW (2,311.35 HP), temperature: 325 °C, rotational speed (min.): 7,673 rpm, Steam turbine M+M Turbinen-Technik – 1.7 MW Industrial top quality For sale: Complete, high-quality industrial steam turbine installation from the renowned German brand M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documents, manuals, diagrams, etc., are complete and available. Key specifications: Type: KT 615-7 Power: 1700 kW (1.7 MW) Year of construction: 2009 Speed: 7673 rpm Inlet pressure: 15 bar (abs) Pedozbkgijpfx Ai Togu Outlet pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built according to German quality standards and guarantees high efficiency and a long service life. The installation is complete with control and measuring systems, valves, and piping, and was used in an industrial environment. The turbine is currently dismantled/disassembled in preparation (as shown in the photos), which simplifies transport and reinstallation. Ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Reliable and proven technology Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Applications: Combined heat and power (CHP) Industrial power supply Waste heat recovery Process industry 📩 Interested or would you like more information? Please feel free to contact us for technical details, a viewing, or a customized quote.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,672 h, functionality: fully functional, machine/vehicle number: 1237361A51A, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: Fanuc 0-MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 X-axis travel: 610 mm Y-axis travel: 430 mm Z-axis travel: 570 mm Pjdpj Af Hc Rofx Ai Tjgu Table length: 650 mm Table width: 450 mm Tool holder: BT40 Main spindle power: 15 kW Spindle speed: max. 10,000 rpm Tool magazine capacity: 24 MACHINE DETAILS Control system: Fanuc 0-MD Operating hours: 13,672 h Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,200 x 2,450 mm Weight: 9,000 kg Number of transport packages: 2 EQUIPMENT Tool magazine Documentation CE marking

Condition: used, Year of construction: 2014, functionality: fully functional, product width (max.): 1,400 mm, Roll winding, laminating, printing, and folding machine for sale. -Two printing units with chamber doctor blade system. -Cassoli calender with sleeve embossing. -Film laminating, folding machine with triangular fold. -Packaging machine for rolled goods up to 1400 mm wide. -A Hugo Beck packaging machine for the folded products is also for sale. Further details can be found in the images. Pgjdpfx Asz Rn A Rei Tsu

Condition: good (used), For sale is our ferrite air-gap grinding machine. The machine is fully functional (power cord is missing) and in good condition. Includes a comprehensive range of accessories. The sale includes a large number of grinding tools and holders for virtually any application. We would be happy to answer any further questions about the machine. Psdpfx Ao Af I Iiei Togu

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany). Psdewl Hp Nspfx Ai Tegu

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101022-76F, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 380 V, Up for sale is a high-performance BOPP Slitting and Rewinding Machine manufactured by KUO GANG MACHINERY CO., LTD (Model: KG-201). This versatile industrial machine is specifically engineered for precision slitting and high-speed rewinding of BOPP adhesive tapes, packaging tapes, and various plastic films. Built with a robust mechanical frame, it offers high stability, precise tension control, and reliable continuous operation, making it an ideal choice for packaging manufacturers, tape converters, and printing facilities. The machine is in fully complete condition and comes equipped with an extended discharge/loading framework and auxiliary support structures. Features & Capabilities: Precision Slitting & Rewinding: Designed to handle BOPP rolls with clean edge-cutting and neat rewinding finish. Adjustable Speed Control: Smooth operational speed adjustment up to 100 m/min for optimized production cycles. Heavy-Duty Construction: Solid steel frame designed to minimize vibration during high-speed runs. Integrated Extension Bench: Includes extended feeding/discharge rails and support tables for convenient material handling and core loading. Pgodpfs Admamsx Ai Tsu Easy Maintenance: Simple access to slitting blades, roller guides, and drive systems for minimal downtime.

Year of construction: 1994, operating hours: 43,200 h, condition: ready for operation (used), functionality: fully functional, water connection: 90 mm, machine/vehicle number: Nr. 377499, I am selling here a complete Pelton turbine with accessories, designed for use in a hydroelectric power plant with a power output of 7 kW. - Power: 7 kW - Type: Pelton turbine - Accessories included as shown in the photos - Robust structure for long-term use This unit is ideal for projects in the renewable energy generation sector. It shows the normal signs of wear and tear expected from a technical system of this type. Pjdpfxsz Rm R Hs Ai Togu The system is in perfect working order and ready for use. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, !!! Attention!!! We buy your functional or defective Hobart pulping turbine, including accessories, and offer a repair service upon request. This is a pulping turbine from the premium manufacturer Hobart, model PVM 302. It is a mobile, versatile turbo mixer for pureeing, mixing, chopping, emulsifying, stirring, etc. Ideally suited for processing: vegetable, meat, and fish soups, sauces, vegetables (grated), mashed potatoes, yogurt, dressings, fruit and vegetable purees, liquid dough, baked goods, sorbets, and omelets. Compact dimensions and easy handling guarantee quick, cost-effective use even in confined spaces. The machine is equipped, as can be seen in the photo of the pulping head, with the PVM 302 sieve insert, 4 mm hole. The PVM 302 has an integrated safety feature that prevents automatic restart after a power failure or mains disconnection. An electrical safety device ensures that the mixing head can only be operated when it is set to a height of more than 300 mm or less than 900 mm. The PVM 302 has been completely overhauled in our in-house workshop, and the following parts have been replaced: flexible shaft / bearing shaft / mechanical seals / various ball bearings / 1 set of horizontal blades. The pulping turbine is now in top technical condition. The unit can be inspected and demonstrated in our workshop. Upon request, we can also send a video of the unit. The machine is available immediately. The fine sieve insert is included, as is a grease gun for regular maintenance. See photos! Manufacturer's list price = €32,945 NET You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional Shipping or self-collection can be flexibly chosen Competent advice - before and after the purchase Provision of operating instructions, wiring diagrams & spare parts Inspection according to DGUV V3 Technical data: Dimensions: Pgsdpfx Aijzzw Ilj Tou in operation L x W x H = 1350x550x1500 mm in rest L x W x H = 1100x550x1700 mm Turbine speed / 1st gear 725 rpm / 2nd gear 1450 rpm Serial number: 94-842572 Year of manufacture: 2003 Condition: Used, overhauled, fully functional Machine design: Frame and all parts in contact with food made of chrome-nickel steel 18/9. The machine is mobile and equipped with 4 large rollers, two of which can be swiveled and locked. The machine is tilt-proof due to the rear outriggers. Machine with high-performance turbine and vertical and horizontal blade set; good chopping and pureeing performance. Turbine with suction guard. Power transmission via flexible shaft. The machine has the GS/CE mark. Motor: Special motor, ball-bearing, with motor protection switch and robust on/off switch, suitable for continuous operation. Turbine with two speeds. I. gear 725 rpm (low speed) II. gear 1450 rpm (high speed) Motor with fan cooling, protection class IP 54 Total connection value: 1.85 kW three-phase 400V/50/3 Fuse: 3 x 10 amps.

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology Pjdpfxezmqa Ej Ai Tegu A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: good (used), Year of construction: 1975, functionality: fully functional, total width: 1,900 mm, roll diameter: 1,800 mm, overall weight: 3,100 kg, product width (max.): 1,900 mm, input voltage: 440 V, Slitter rewinder 190 wide DC motors Shaftless input with hydraulic platform to raise the web, the system supports core sizes ranging from 3 inches up to 12 inches and processes of 150 to 1900 mm width webs, output core sizes ranging from 3 to 12 inches  Pgjdpfxsy Ufkqj Ai Teu

Year of construction: 2013, condition: used, Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment. Pgedpo Aalpfefx Ai Tou

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Podpfx Aiozudfds Tsgu Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Pgjdewd Emwopfx Ai Tou Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: Pgjdpey Ufgxsfx Ai Tsu The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Pjdsz Ap R Iopfx Ai Tsgu Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Condition: used, mileage: 252,000 km, power: 290 kW (394.29 HP), first registration: 04/2004, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro3, Year of construction: 2004, Equipment: ABS, electronic stability program (ESP), * Mercedes Benz Actros 4140 RSP suction excavator * Registered: 04-2004 Psdpfsz Engdox Ai Tsgu * EPS transmission * Drive: 8x4 * RSP ESE 32/7 S * Double turbine * 2 x remote control * LEAF SPRING SUSPENSION * More pictures and videos available via WhatsApp * Information subject to change without notice and prior sale.

Condition: good (used), Year of construction: 2003, Hermeler foil winding machine Suitable for winding or unwinding agricultural plastic cloth etc. This winding machine is driven by the hydraulic of the tractor Suitable for rolls of 180 cmwidth output 140 cmHydraulically drivenWinding/unwinding Podpfxsz Rdwwo Ai Tegu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 1999, 180 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Pgodpfez Rdw Dox Ai Tju Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Pgjdpsy Nwq Sofx Ai Tsu

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Podpszta Eqofx Ai Togu

Condition: like new (used), Hermeler winding machine Pgedpfx Aiez Ra Ifj Tou Suitable for winding agricultural plastic This winding machine is hydraulically driven Winding width: 200 cmWith 5 ironbars More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery