Used Viber-System Stacker 1500 Kg / 3 M for sale (122,644)

Condition: new, Year of construction: 2026, Load capacity 1500 kg Lifting height 3000 mm Total mast height 3483 mm Battery voltage 24 V Battery weight 2×23.5 kg Battery capacity 85 Ah Dedpfxezr Ey Ds Akmewc Drive motor power 0.75 kW Lift motor power 2.2 kW Travel speed (with / without load) 4.2 / 4.5 km/h Turning radius 1366 mm Fork length 1150 mm Maximum fork spread 700 mm Fork width 165 mm Total height (lowered forks) 1983 mm Own weight 560 kg Noise level < 70 dB(A) Wheel type Polyurethane (PU) Drive wheel Ø210 × 75 mm Load wheel Ø80 × 60 mm Stabilizer wheel Ø115 × 55 mm Wheel arrangement (front / rear, x = driven) 1x, 1/4

Condition: new, Year of construction: 2026, Load capacity 1500 kg Fork lift height 3000 mm Mast type Two-stage Fork length 1150 mm Fork width 550 mm Minimum fork height ≤ 90 mm Traction / lifting motor 0.75 kW AC / 2.2 kW DC Battery 24 V / 100 Ah (lead-acid) Battery weight 2×32.5 kg Charging time approx. 4 hours Charger power supply 230 V AC Travel speed (with / without load) 3.5 / 4.5 km/h Lift speed (with / without load) 100 / 155 mm/s Mast height (folded / extended) 2083 / 3568 mm Turning radius 1482 mm Weight 600 kg Operator platform: Foldable, with safety lock Noise level: < 70 dB(A) Wheel type: Polyurethane Drive wheel size: Ø250 × 80 mm Bearing wheel size: Ø80 × 60 mm Additional wheels (dimensions): Ø115 × 55 mm Wheel arrangement (front/rear, x = driven): 1x, 2/4 Dwedpfx Akszr E Dijmoc

Condition: excellent (used), Approx. 1500 m² single-story steel platform Used, good condition, see pictures. Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² C-profile and Sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction is 38 mm chipboard, highly compressed, tongue and groove Underside white, top side gray coated Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded. Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: Dweded S S N Repfx Akmsc • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of others. Our full service is provided by our own employees: Cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Dwjdpfx Asyzc Ruokmoc

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Dwjdpfx Akezz Rw Hemec Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control Dwedpfxsyupd Ho Akmsc - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 406 × 813 mm. Magnetic chuck 400 × 800 mm. Maximum table load with magnetic chuck: 500 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 350 × 40 × 127 mm. Spindle speed 1450 rpm. Djdozr H Naopfx Akmjwc Spindle motor power 5.5 kW. Total machine power 9 kW. Surface roughness up to Ra 0.63 µm. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP40100AHD (406 x 1020 mm) - priced at €26,000.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) Dwodpfevlgzajx Akmjc or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Dwedpfehzw Hiox Akmoc Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Dwedszr I H Hopfx Akmoc Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Longitudinal feed range 0.028 – 6.43 mm Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Condition: new, Year of construction: 2026, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Djdpfx Aozr I D Sekmewc Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev. Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg A larger model (410 x 1500 mm) is available for €6,800 net.

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: Dedpfezg Il Sjx Akmswc - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Dodpfxez Iql Ie Akmjwc Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Djdoyi Uq Uspfx Akmjwc Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 615, overall weight: 8,700 kg, The Mori Seiki SL-303 BMC/1500 is a robust, high-precision 3-axis CNC inclined-bed turning and milling center. The model designation indicates a system with driven tools (BMC), C-axis, milling function (MC), and an extended distance between centers of 1500 mm for machining long workpieces (e.g., shafts). Dwsdpfxez N Dkbs Akmec Equipment: -Single spindle, three-jaw chuck, automatic tailstock SMW Autoblock, 12-tool turret, automatic steady rest, chip conveyor Control: -MSG-501 (SL303-615) Key Features & Advantages: -Complete machining (Multi-Process): By using driven tools and C-axis control, milling, drilling, and threading operations can be performed directly after turning without re-clamping. -High rigidity: The massive cast iron inclined bed effectively dampens vibrations, which contributes to excellent surface finishes and a long tool life. -Thermal stability: Comprehensive cooling and oil circuits around the spindle minimize thermal expansion during long and heavy roughing operations. Accessories: -Workbench with partition (1 door, 3 drawers), containing: hand tools -Telescopic drawer cabinet (7 drawers), side shelf, containing: various turning tools and tool holders

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 Dwsdpfjyga Utox Akmjc • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Dedpfxjz Iz Sfs Akmewc Air requirement: 4.1–7 bar

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm Dsdszcmcvopfx Akmowc 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: Dsdpenfvx Nsfx Akmjwc The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 250 x 500 mm. Magnetic chuck 250 x 500 mm. Maximum table load with magnetic chuck: 180 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 200 x 20 x 31.75 mm. Spindle motor power 2.2 kW. Total machine power 3.7 kW. Surface roughness up to Ra 0.63 µm. Includes: coolant system, magnetic separator, hydraulic station, lubrication, magnetic chuck, PLC controller, and touchscreen. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Dwjdpfx Akozr H E Usmoc Another model with a larger worktable is available: the SMP3063AHD (635 x 305 mm) and costs €22,000.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. Djdpfx Asz Iww Rskmowc • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Dedpfxsyugals Akmswc Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: used, Year of construction: 2005, Second-hand machine Dsdpfxszk N S Uj Akmswc Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, mileage: 565,000 km, power: 243 kW (330.39 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 10 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 8,150 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, Year of manufacture: 2018 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Empty weight: 9.705 kg Carrying capacity: 8.895 kg GVW: 18.600 kg Tail lift: Dhollandia, 1500 kg APK (MOT): tested until 03/2027 Registration number: 41-BKR-3 = Additional options and accessories = Dwsdpfx Asz Azr Djkmsc - 3 Seats - Airbag - Air horn - Aluminium fuel tank - Camera system - Heavy duty engine brake - Lat to lath timbered - LED- lighting - Lock diff - Radio - Rear air suspension - Reversing camera - Roof spoiler - Suspension seat 2x

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets Dwedpfx Akjyc H R Tomoc • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)