Used Viscotec 2Vhd12-3D Hygienic Dispenser for sale (2,651)

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Rcedpfx Ansxcvzaokjd Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Rcsdexcgihspfx Ankod Product-contacting surfaces Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Year of construction: 2023, condition: like new (used), functionality: fully functional, ViscoTec 3VHD12 – Hygienic Dispenser (Without Motor) – 35 pcs ViscoTec 3VHD12 Hygienic Dispenser – brand new, unused, supplied without motor. Ideal for precise dosing of viscous, shear-sensitive, or filled materials in food, cosmetics, pharma, and specialty production environments. Key Features: 316L stainless-steel hygienic design High dosing precision and repeatability Suitable for food, cosmetics, pharma and biotech applications Pulsation-free continuous dosing (endless piston principle) Easy cleaning (CIP/SIP compatible) Ready for integration with a wide range of servo motors (motor not included) Technical Highlights: Max. flow approx. 200–240 ml/min Max. pressure: 20 bar Dosing principle: endless piston Weight: ~2.5 kg Compact unit for machine integration Delivered without a drive/motor Quantity Available: Redoxy Hnlspfx Ankscd 35 units – all brand new, never installed. Condition: New, unused. Originally supplied directly from ViscoTec. Terms / Shipping: Sold EXW (Netherlands or Israel). Buyer arranges pickup and transport. Packaging can be provided upon request. *more technical details in attached PDF files.

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Complete System: Bar Former & Topping Unit – The Perfect Starter Kit for Bar Production Performance & Versatility in One System – Ideal for Start-ups or Expanding Production! This high-quality complete system, consisting of a bar former and topping unit, enables efficient and precise production of up to 10,000 bars in just 4 hours. Whether bars, mini bites, or innovative new products – the system offers maximum flexibility with exact portioning and processing. Technical Highlights: Rcodoxcv Adopfx Ankod - Forming, filling & topping – all in a single operation - Precise dosing for a wide variety of product sizes (from mini bites to standard bars) - Suitable for all viscous masses such as: - Cookie dough - Protein masses - Gingerbread dough - Muesli mixtures, and much more - Production capacity: up to 10,000 units / 4 hours - Operating hours: only approx. 300 hours – in nearly new condition! Your Advantages: - Ready for immediate use – Plug & Produce - Ideal as a starter kit for young brands or for expanding existing lines - Compact design – space-saving & efficient - Robust construction for continuous industrial use - Low-maintenance & easy to clean

Condition: used, 3D Systems SLS PRO 230 Sinterstation Pro Fully operational and complete with extensive accessories Rodpfxjyghifj Ankscd

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its Rcedpfszpvumox Ankod large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Rjdpfx Ajzpvdzenkocd Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, functionality: fully functional, total length: 262 mm, total height: 158 mm, total width: 158 mm, overall weight: 1 kg, Artec Eva professional 3D scanner, tested and fully functional. Handheld scanner with white structured light technology (LED), ideal for scanning medium and large objects with high-quality color capture. KEY FEATURES: - 3D resolution: up to 0.2 mm Rcedpfsy U H Rxex Ankjd - Accuracy: up to 0.1 mm - Capture speed: 16 FPS (up to 2 million points per second) - Technology: white structured light (safe for scanning people) - Color scanning with 1.3 MP texture - Working distance: 0.4 - 1.0 m - Weight: 0.85 kg (portable, handheld) - Power: 12V DC 2A - Manufactured in Luxembourg - Includes original carrying case and cabling APPLICATIONS: medical sector (body scanning, orthopedics, prosthetics), automotive (reverse engineering of medium-sized parts, dimensional control), heritage and museums (sculptures, archaeological artifacts), sports and technical apparel (human body scanning, custom helmets), forensics and criminology, VFX, and video games. The Artec Eva is the world’s best-selling portable 3D scanner thanks to its combination of accuracy, ease of use, and versatility. Unit sourced from a professional service bureau. Available for demonstration before purchase. Location: Spain. Easy shipping throughout Europe. Please inquire about the type of Artec Studio software license and included accessories.

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Rcedpjzii Umefx Anksd Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Replaceable coater Adjustment: Self-leveling and self-correcting Redpfezd Tt Asx Ankjcd Layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5 m/s Large line detection: 25 m/s Build volume: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a 3D SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows even large models to be produced without prior division. Furthermore, the large base area increases productivity when printing many small models in a single print job. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinters, operate using a layer-by-layer process based on the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unsolidified powder supports the parts during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Fully automatic (automated setup and self-monitoring, automated powder loading, automated recycling and powder removal, locking binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special setup requirements: None Rcedpozdyxrefx Anksd Type: ProJet 660 Pro 3D printer Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, type of input current: AC, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, 6x HD2500 plus Rcedpfx Anoyb R E Sjksd Very good condition

Condition: excellent (used), Manufacturer: MORETTO S.P.A. Rjdpfxet H Ndpe Ankscd -type: Hopper Loader; Serial.: 1302868; Model: F3F40 -electrical data: 230V; 50/60Hz; 1kW -capacity: 50dm3/h -weight: 11 kg

Condition: good (used), Year of construction: 2005, functionality: limited functionality, Description MEASURING ARM IN SUITCASE. EQUIPMENT WE CAN SEND FOR CUSTOMER WOLDWIDE Specifications Manufacturer FARO - SWITZERLAND Rodovlaq Iopfx Ankocd Model PLATINUM P04 Year 2005 Condition Used

Condition: new, Year of construction: 2022, Ultra-fast 3D plastic printer Ultra-fast 3D plastic printer (growing volume 275x155x400 mm) for industrial use and learning environments, with fast material exchange and a wide selection of more than twenty print materials. Challenge the speed and quality of injection molding and take advantage of the superior flexibility without tools! Whole metalprinting system including: - Printer 3D plastic printing - x-Wash Product washing - x-Cure Hardening of printed parts NexaX v1 Software Easy print handling and remote control, job listing, queues and statistics Rodpfxstucr Is Ankocd This is a full system including the 3D-printer, wash station, and the curing device. Materials: KeyGuide, KeyModel Ultra - Ivory, KeyModel Ultra - Light Gray, KeyOrtho IBT, KeySplint Hard, KeySplint Soft, KeyTray, PRO9499 White, Saremco Print CROWNTEC, xABS3843, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xCERAMIC3280, xDENT201-Gray, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xMODEL15-Gray, xMODEL17-Clear, xMODEL35-Black, xMODEL35-Gray, xMOLD, xPEEK147, xPP405-Black, xPRO1100-Black, xPRO9400-FR

Condition: used, functionality: limited functionality, Year of construction: 2013, SLA IPro 8000 3D Printer Redpeyu Uxiefx Ankocd Year 2013 In need of a full service, Has recently been turned on to drain the resin from the tank. Selling machine ex works, Sold as seen. 1 owner from new. RRP £250,000. I have another Ipro 8000 Machine available Year 2017. Both can be sold together as a package or sold for spare parts. Machines can be inspected in Tadley Reading.

Condition: ready for operation (used), Year of construction: 2006, Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible. Rjdpfx Aney S A N Sokocd

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. Rcsdpfx Aoyc H Npsnksd This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan

Condition: used, Year of construction: 1909, 3D Systems ProCure 750 Used to cure 3D-printed parts in an automotive manufacturer's development department. Rcedev Upuuspfx Anked All the lights are lit and the turntable is rotating.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Rjdpfjvu Ticex Ankecd Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg Rcjdpoyvhubefx Anksd If you have any questions or require more information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Rcsdpfxsxwpvgs Anksd Furthermore, a variety of materials is available for the machine.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Rsdpsvu Syyjfx Ankecd Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: ready for operation (used), A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible. Rcodpfx Aow R Uzpjnkod

Year of construction: 2022, operating hours: 5,450 h, condition: ready for operation (used), functionality: fully functional, 3D printer, fully functional. Various additional nozzles included. Includes robust, powder-coated print bed from Prusa. The right extruder has barely been used. Overall condition is good. Printer is ready for collection at any time. Printer specifications (without warranty): The Raise3D Pro3 is a professional FFF dual-extruder 3D printer with a 300 x 300 x 300 mm build volume (255 x 300 x 300 mm in dual mode). It features an enclosed chamber, nozzle temperatures up to 300 °C, automatic bed leveling, and is designed for materials such as PLA, ABS, PETG, ASA, and TPU. Key technical data of the Raise3D Pro3: - Printing technology: FFF/FDM (Fused Filament Fabrication) - Print head: Dual extruder with electronic lifting system (quick change) - Build volume (W x D x H): - Single: 300 × 300 × 300 mm Rjdpfx Aneyim Dkjkjcd - Dual: 255 × 300 × 300 mm - Device dimensions: 620 x 626 x 760 mm - Maximum temperature: - Nozzle: up to 300 °C - Print bed: up to 120 °C - Print speed: 30 to 150 mm/s (standard), HS version (Hyper Speed) up to 300 mm/s - Layer resolution: 0.01 mm – 0.25 mm (depending on nozzle) - Nozzle diameter: 0.4 mm (standard), optional 0.2, 0.6, 0.8, 1.0 mm - Filament diameter: 1.75 mm - User interface: 7-inch touchscreen (1024 x 600) - Connectivity: Wi-Fi, Ethernet - Slicer: ideaMaker - Features: Automatic bed leveling (9 points), print resume after power outage, air filter The Raise3D Pro3 is suitable for industrial applications, prototyping, and small-scale production. The Pro3 Plus is the variant with an extended Z-axis of 605 mm.