Used Vollma End Burr Machine for sale (67,231)

Condition: good (used), 1 x Deburring machine Vollma JK WS 25 Particularly suitable for removing burrs from turned parts. The machine can be inspected under power at our warehouse in Reichenbach. Codpfx Ahoiz Dc Rjmjhc

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Chsdpszwgxrofx Ahmjc (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Cedpfswk Rlxjx Ahmehc max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! Chsdpfx Ajz Dw Emehmsc TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Codpfx Ahez E T Tvomohc Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated upon prior arrangement. - The machine has undergone subsequent technical modifications. As a result, a second, higher speed is available for processing smaller pipe dimensions. - A protective frame was manufactured to protect the machine, which helps to minimize external damage. The protective frame also features two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 setpoint values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of supply includes a wide selection of tools for various applications, including: Round tubes Flat bars for heavy-duty and lightweight arbors Square profiles Chodpfxez Hcp Ne Ahmec Rectangular tubes T-profiles Angle iron Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex-works. The disassembly, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned freight forwarder. Technical specifications according to available documentation. Subject to prior sale. Seller: Firma GERO Karl Gerke e.K. 48629 Metelen, DE

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Chedpfey Hvp Usx Ahmoc

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Chodpfxez Eay No Ahmoc Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Chjdszzwpvjpfx Ahmsc Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Chjdsid Iymopfx Ahmec Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Csdpfx Aozqun Uehmjhc Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar Codpfstq Takjx Ahmohc - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Chedopr Utlopfx Ahmec Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: E212514, total width: 240 mm, total height: 120 mm, spindle speed (min.): 4,000 rpm, spindle speed (max.): 7,000 rpm, overall weight: 300 kg, rotational speed (max.): 7,000 rpm, rotational speed (min.): 4,000 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, Soundproof automatic end milling machine. Cedoz Ii Uujpfx Ahmehc Adjustable feed rate and rotation speed. -45° to 45° end milling by adjusting the stop. Easy and quick blade changes thanks to pneumatic quick-release coupling. Includes 4 spindles with 12 accompanying blades. In very good condition.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Chsdpfx Ahsz Dillsmsc Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Codpfjzqgztsx Ahmohc

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm Chedjxhub Aspfx Ahmec - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Chedpfx Ahsy D A Hnemec Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps Cedpsr Iiimsfx Ahmohc - Mist lubrication system - depth adjustment - 400V

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Cedpjzz Hn Iofx Ahmshc Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: used, Cutters for the professional, machine-based processing of solid wood, wood-based materials, and other suitable materials. Technical data: Chjdpfx Ahezrydwjmsc - Cutter blade: WP HW strip planing blade Z4 - Cutting circle diameter (ø): 123 mm - Bore: 123 mm - Marking: MEC MAN BG-Test - Length: 123 mm - Material: Steel, aluminum

Condition: ready for operation (used), functionality: fully functional, Swivel bending machine, type 2000 x 2-3mm Csdjz Akc Ejpfx Ahmjhc - Bending length 2000mm - Sheet metal thickness over the entire length 2-3mm - Bending process performed manually - Counterweight Dimensions: L x W x H 3 x 0.8 x 1.5 meters / Weight 1600 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1988, functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Cjdpfx Aovk I Thjhmehc Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS We can organize transport and loading.

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Cjdpfsn Sm Ddex Ahmshc Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 720 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 90 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece Chjdpfxeid Ixdj Ahmec To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch, emergency stop switch and restart protection. Without Fixing Holder: max. Length of workpiece, finished: 300mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 90kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 720x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks inklusive folgendem Zubehör: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box