Used Voran Pa750Evo-G for sale (35,799)

Condition: new, capacity 750 l/h heater capacity 70 kW electrical power 1,1 kW electric outlet 400V 50Hz (three-phase) fuse 16 A dimensions: length 1 165 mm width 795 mm height 1 805 mm weight 463 kg Hjdpfx Aoyw Hu Asqgsfn Gas consumption liquid gas approx. 5.5 l/h Gas consumption natural gas approx. 7.5 m³/h Max. exhaust temperature: 210°C

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 10038587, Pasteurizer PA500-RWT-Gas Used Hfedpfx Aqjtpcm Ijgjn Subject to prior sale!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, power: 4 kW (5.44 HP), fuel type: electric, machine/vehicle number: 10038627 / 316200002G, Voran Muser steel version New machine - Slight paint damage Hfodpfxstr Dx Se Aqgen Subject to prior sale!

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Hsdez I Ig Nopfx Aqgsfn Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: new, machine/vehicle number: 190040021, In front inclined conveyor belt 2,800 x 390 mm, angled Hfodpfx Aotvfdnjqgen

Condition: new, machine/vehicle number: 190040019, Inclined conveyor belt (4,000 x 390 mm) Hfjdpfx Aqotvfb Nogsn Inclined conveyor belt with direct drive and PU-PVC belt

Condition: like new (used), VORAN EP1000 Industrial Pulper / Refiner – Stainless Steel VORAN EP1000 industrial pulper, designed for the separation, crushing, and refining of fruits and vegetables, allowing for the extraction of pulp or puree and the simultaneous separation of skins, seeds, pits, and other unwanted solid fractions, depending on the processed product and the installed screen. The product is continuously fed into the machine, where a rotating system drives it against a perforated sieve or screen. The usable fraction passes through the screen, while the solid residues are conveyed to a separate outlet. Its stainless steel construction and hygienic design make it particularly suitable for industrial lines for the production of juices, purees, pulps, and products derived from fruits and vegetables. MAIN FEATURES -Manufacturer: VORAN -Model: EP1000 -Type: Industrial pulper / refiner -Continuous processing system -Separation of pulp and solid residues -Rotating extraction / refining system -Internal sieve or screen -Continuous product feed -Separate outlets for product and residues -Construction mainly in stainless steel -Driven by an electric motor -Closed process chamber -Access for cleaning and maintenance -Hygienic design for the food industry -Integrable into fruit and vegetable processing lines PROCESS The pre-prepared product is introduced into the VORAN EP1000, where the rotating system conveys and presses it against the perforated surface of the screen. The pulp, puree, or liquid fraction passes through the perforations and is collected by a specific outlet, while the larger parts that do not pass through the screen are evacuated separately. This principle allows for the following operations: Extraction of pulp and puree Refining of product Separation of skins and seeds Separation of coarse fibers Removal of solid residues Preparation of product for subsequent processes APPLICATIONS Hjdpfxjzxcp Ao Aqgofn Especially suitable for fruit and vegetable processors, manufacturers of juices, purees, pulps, jams, sauces, and preserves. Depending on the screen and configuration installed, it can process different fruits, berries, tomatoes, and vegetables, and can be part of extraction and pulp preparation lines. The VORAN EP1000 can be integrated with washers, mills, crushers, pumps, tanks, pasteurizers, refiners, and filling systems. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 10038241 / 147300000G M0009906E/07/00007, Voran inclined elevator SA 400 with RM 75 USED Subject to prior sale! Hfodpstqdnlofx Aqgjn

Condition: used, Year of construction: 2019, machine/vehicle number: 9300000000083049, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 415 V, input current: 5 A, total width: 1,950 mm, total height: 2,480 mm, overall weight: 1,100 kg, fuel type: gas, We are offering this used Pavailler CRISTAL FM2 F/G rotary rack oven, manufactured in 2019. Type designation: Rack oven CRISTAL FM2 F/G Serial number: 930000083049 Date of manufacture: 07/2019 Category and gas pressure: I2L3P / 25 - 30 mbar Current: 5.8 A Gas certification number: 1312AU1466 Gas certification company: 1312 Net weight: 1100 kg Heating capacity: 77 kW Electrical power: 4 kW Flue gas outlet type: B23 Fuel: Natural gas Destination: Netherlands Voltage: 380-415 V Country of origin: France Suitable for baking trays of: 600x800 mm (WxDxH): 1950x2760x2480 mm Door opening (WxH): 800x1850 mm Price is exw Zwaagdijk NL Status: AS IS, no guarantees If you have any questions or would like more information, please feel free to send us a message or call us. Hfsdpoz D Uxkefx Aqgon

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1 x G. Mondini S.p.a. inline heat sealing machine fitted with ICE Zodiac thermal transfer overprinter. Supplied with User Manual, Electrical Diagrams, 4 x sets of tooling with arms for different sized punnets and 1 x tool trolley. Manufacturer – G. Mondini S.p.a. Model – SF 90. Serial number – 3713/09-1. Date of manufacture – 2009. Tooling set 1 - Infia K62, 4 x 1 format, Square punnet size - 163mm long x 163mm wide (approx). Tooling set 2 - Proseal SPL, 2 x 1 format, Tray size - 270mm long x 174mm wide (approx). Tooling set 3 - T1478X PS48213, 5 x 1 format, Tray size - 174mm long x 132mm wide (approx). Tooling set 4 - T1960U PS58822, 6 x 1 format, Tray size - 170mm long x 100mm wide (approx). Hsdpfx Aoy Hl E Soqgofn Overall dimensions - 4220mm long x 900mm wide x 2150mm high. Tooling trolley dimensions - 1300mm long x 750mm wide x 1750mm high.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: Hodpfez Sb Rlex Aqgofn * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 10038626 / 112600000G, Voran basket press 60K New machine - Slight paint damage Subject to prior sale! Hfedpfstr Dzfjx Aqgjn

Condition: excellent (used), Year of construction: 2016, Opportunity to buy this Universal Robot UR5 with G-loader to ensure automated loading and unloading of your cnc-machine. Including: UR5 robot, controller, touchscreen control unit, and connecting cables Software (GUI) Table with storage space for the controller and a mounting point for the touchscreen Product positioning system (incl. magazine for product carriers) Gripper (incl. valve) Air blow-off unit (inlc. valve) Compressed air treatment unit Signal tower Payload 5 kg Operating radius from rotation point 850 mm Orientation working range 720° Gripping force 10 to 200 N Gripper opening 0 to 84 mm Hedpsz Niqaefx Aqgjfn Full technical specifications in the attached document. Immediately available for delivery. Can be seen in operation upon appointment in Belgium. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas Hfodpfx Aqoz Hngmogon • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: new, power 2,2 (3,0) kW (PS) Hsdpeb I Sx Eofx Aqgsfn electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 735 mm width 1 466 mm height 1 290 mm insertion resp. discharge height 850 mm weight 350 kg material 1.4301 / AISI 304 lifting force up to 550 kg / bin rotation time 15 sec fruit discharge height 900 mm fruit discharge width 500 mm suitable for standard bulk bins 1 000 x 1 200 x 970 mm scope of delivery hydraulic power unit

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Speed class: 15 Hsdpoz Hvmnjfx Aqgsfn ISO class: ISO class 3 = 2,500–4,999 kg Front tires Tire type: Non-marking Outer diameter: 450 mm Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Tire condition: 0–20 % Battery voltage: 12 V Battery type: Starter Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Condition: new, power 11 (15) kW (PS) throughput approx. ……………..… 1500 kg/h electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: length 810 mm Hsdpfx Aqjb Nvtkjgsfn width 725 mm height 1 570 mm weight 125 kg material 1.4301 / AISI 304 discharge height 495 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 1,500 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 140 kW Electrical rating 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Hfsdpfx Aqjb Nudkjgen Dimensions: Length 1,715 mm Width 900 mm Height 1,900 mm Weight (heating circuit drained) 500 kg Weight (heating circuit filled) 600 kg Gas consumption liquid gas approx. 11 kg/h Gas consumption natural gas approx. 15 m³/h Max. exhaust temperature: 210°C Noise level (LW, A) 83 dB

Condition: new, power 1,5 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 740 mm width 1 720 mm height 1 280 mm (tilted 2 490 mm) insertion resp. discharge height 850 mm Hfedeb I Sydjpfx Aqgsn weight 350 kg material 1.4301 / AISI 304 lifting force up to 550 kg / bin rotation time 20 sec fruit discharge height 900 mm fruit discharge width 500 mm suitable for special bulk bins 1 250 x 1 200 x 970 mm scope of delivery hydraulic power unit

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 500 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 45 kW Electrical rating 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,400 mm Hodpfeb Nur Dex Aqgofn Width 900 mm Height 1,850 mm Weight (heating circuit drained) 330 kg Weight (heating circuit filled) 430 kg Material 1.4301 / AISI 304 Gas consumption liquid gas approx. 4 kg/h Gas consumption natural gas approx. 5 m³/h Max. exhaust temperature: 210°C Noise level (LW, A) 83 dB

Condition: new, - 1 discharge power 5,5 (7,5) kW (PS) Hjdsb Nvr Ispfx Aqgefn throughput approx. ……………. 800 kg/h electric outlet 400V 50Hz (3 phases) fuse 20 A dimensions: length 725 mm width 690 mm height 1 520 mm weight 70 kg material 1.4301 / AISI 304 discharge height 475 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). Hedpfoz Ikz Aex Aqgofn The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg -Roller spacing: 290 - 1100 mm -Rollers: Ø 225 x 300 mm -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch Hsdjz Ruwujpfx Aqgsfn -Individual components: see photos -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm -Weight: 706 kg / 463 kg

Condition: ready for operation (used), functionality: fully functional, power: 67 kW (91.09 HP), operation weight: 8,350 kg, Year of construction: 1995, operating hours: 7,800 h, machine/vehicle number: 7ZM001119, Equipment: UVV, cabin, quick-change device, PACKAGE CAT 914G (year of manufacture 1995, 7,800 hours) - Inspected according to UVV regulations, with quick coupler (without bucket) Hfjdpfx Aezcnx Ssqgon - Ready for operation CAT 914G parts machine (year of manufacture 1996) - Missing: windshield, driveshaft, steering column, master brake cylinder, tilting cylinder, right-hand door removed without glass CAT 914G spare parts: - Driveshaft, filters, 500-hour maintenance kit, spare wheel, axle shaft seals, overhauled injection pump - Asking price (package): €20,000 - Location: 09484 Hammerunterwiesenthal

Condition: like new (used), Year of construction: 2011, operating hours: 237 h, KAESER N153-G compressor, serial no. 1042 / dryer / filters MANUFACTURER: KAESER Hodpfxez Hl Izj Aqgjfn TYPE: N153-G SERIAL NO.: 1042 YEAR: 2011 POWER (kW): 4 CAPACITY (m3/min): 1.33 PRESSURE (bar): 40 HOURS (SERVICE/TOTAL): FREQUENCY CONVERTER: BUILT-IN DRYER: EXCHANGER: COOLED (AIR/WATER): ON THE TANK: DOCUMENTS: CONNECTION: NEW/USED: USED