Used Wafios Hinge Joint Fance Machine for sale (66,650)

Year of construction: 1976, condition: used, Machinetype: Hinge joint fence machine Nedpfx Asw Rq Avogrjwl Make: WAFIOS Type: HJGM Constr. year: 1976 wire diameter range: 2,0-3,0 mm working width: 2000 mm vertical distance of wires: 150 mm

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW Nedpehrm Iuefx Agrowl - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nwodsz D Taaspfx Agrel Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: good (used), Stegherr 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Nwedpfx Agozakw Eerel Voltage 380 V, 50 Hz

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Nwedpfozvdd Asx Agrol Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, Cross-tenon milling machine Manufacturer: Stegherr Type: KSF Suitable for milling cross-tenon joints in, for example, windows, doors, and furniture. Equipped with 3 milling units. One upper and one lower milling unit mill the two miter-like recesses simultaneously in coordinated operation. A third unit mills the flattening simultaneously. The machine table is moved pneumatically-hydraulically. The feed and return speed is adjustable. With foot-operated control. 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Njdpsz Adzzjfx Agrowl Voltage 380 V 50 Hz Dust extraction port diameter 180 mm Includes 3 milling tools.

Condition: used, Sauter Type RS semi-automatic finger-jointing machine for joining timber workpieces using finger joints. The machine is suitable for processing offcuts and for producing extended solid timber slats. Consisting of: Sauter Type RS-FPEL 130 milling and gluing machine Sauter Type RS-DKPV 6 press Sauter DAS 500 cross-cut saw Nwjdjz D Dw Aspfx Agrol Technical data: - Milling height: 130 mm - Max. finished length: 3,000 mm - Workpiece width: 45–95 mm - Milling motor: 15 kW

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Nodpsyza Dfjfx Agrjwl

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8495, Offer Number: D08L/8495 Machinetype: straightening and cutting machine Make: WAFIOS Nwedpfx Ajzwqnqegrjl Type: R3 Constr. year: 1980 diameter range: 1,5-7 mm cutting length: 2000 mm speed - meters/min: 90 Location: In our warehouse

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH Nwodpfsz Eh Egex Agrol

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. Nwedpfx Agsxrb Tgorjl #8407

Condition: good (used), Year of construction: 1989, Machine with full equipment Length approx. 9 m Jointing Rip sawing Dadoing Njdpfef Ua R Hox Agrswl Rounding Edge profiling Scraping Edge profiling

Condition: excellent (used), Year of construction: 1978, Technical details : Capacity - 110 m2/h Max. width of mesh - 2.000 mm Mesh opening size - 30-100mm Motor power - 4 kw The machine is adjusted to work the grass fence Nsdpfx Aek D T Nnogrswl Excellent condition

Year of construction: 1996, condition: used, Door hinge drilling machine Nwodpfx Agoc Nin Djrel

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, total width: 1,350 mm, total length: 1,200 mm, total height: 1,300 mm, spindle speed (max.): 3,900 rpm, overall weight: 530 kg, input voltage: 400 V, milling spindle length: 200 mm, rotational speed (min.): 3,900 rpm, rotational speed (max.): 3,900 rpm, working width: 200 mm, spindle diameter: 50 mm, We are offering this used Omec F10/200 fork cutter, manufactured in 2009. Nsdpfx Agezmug Norswl Manufacturer: Omec Model: F10/200 Year of manufacture: 2009 Condition: used Machine type: Fork cutter, finger fork, drawer fork Fully functional OMEC F10/200 milling machine for the production of finger forks for drawer blade manufacturing. Manufactured in 2009, motor power 11.5 kW, spindle diameter 50 mm and weight approximately 530 kg. Without fork cutter set. The machine is in good condition and can be inspected and demonstrated by appointment. Loading and transport can be arranged.

Year of construction: 1993, condition: good (used), I sell the angular drilling machine with hinges inserting suitable for doors production MARZANI MACCHINE CHEAP WORK Year: 1993 Number of drilling spindles 1 (drilling head tiltable fully -7 up to +90°) Number of inserting heads 1 (magazine suitable for door hinges) Inserting mechanically, screw system. Nedpfxohw Dfvs Agrjwl Very good condition. Available immediately

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Nwodpfexxb Rrex Agrjl Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, hinge drilling and insertion machine Nwsdpezk Tpwjfx Agrol

Year of construction: 2008, condition: ready for operation (used), Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich. Nodjwwlk Aopfx Agrswl

Condition: excellent (used), Year of construction: 2017, COMEC Dovetail Milling Cutter Type FRV1 Nwedpfxjzynm Ns Agrjl

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Nwedpfevwfaxox Agrjl

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BBM40PNEU Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40PNEU hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40PNEU ensures high-quality work while remaining simple to operate. Key Advantages Pneumatic system – Pneumatic spindle lowering provides convenient and precise positioning as well as drilling repeatability, significantly improving efficiency and the quality of hinge installation. Pneumatic quick-connect system – Allows easy disconnection of the machine from a stationary compressed-air source, and together with its compact design, enables use as a hand-held drill directly on assembly sites. Nsdpfx Asxzdhrogrswl Precise drilling for furniture hinges – An adjustable depth stop located at the rear of the machine allows full control over drilling parameters, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) ensures comfort and safety during operation. High-power 1.1 kW motor – A uniquely powerful motor compared to competitive machines, providing sufficient torque for working with Blum-type hinges and other fittings systems. Three working spindles – Allow simultaneous drilling of the main hinge hole and the side pilot holes. Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, carpentry workshops and maintenance departments, service companies specializing in hardware installation, schools and training centers related to woodworking. Standard Equipment 3-spindle hinge boring head, pneumatic fence feed (110 mm), adjustable depth stop, 300 × 260 mm worktable, powerful 1.1 kW motor (230 V), 35 mm cutter + two 2 mm drill bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 300 × 260 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Speed 2800 rpm Workpiece clamping manual Control pneumatic Motor 1.1 kW Power supply 230 V Overall dimensions 350 × 500 × 550 mm Weight 20 kg

Year of construction: 1985, condition: refurbished (used), Dimeter range- 4-10mm Cutting lenght - 2,0 m ,(possibly longer) Speed -90 m/min. Nedpfx Agodt Arljrswl Reconstruction- 2018 Control - PLC Siemens Double mechanic pay off wire

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization). Nwedpfjyhn A Iex Agrsl

Condition: new, Year of construction: 2026, machine/vehicle number: 2022-04, -wood entrance 300 - 3000 mm -cutting height max. 250 mm -wood rests and tools drive -Performance wood thickness 25 mm = 72 parts / min -Performance wood thickness 35 mm = 51 parts / min Finger jointing machine and lines are a masterpiece Nedpfx Aecbyqfsgrewl of the woodworking industry >simply the best fingerjoint system> Delivery time approximately 10 months The manufacturer and supplier MINDA industrial plants