Used Wafum Tud 40 for sale (21,466)

Condition: good (used), Lathe WAFUM Type TUD 40 Nsdpfx Asyx Uv Dsg Dewf Centre distance: 1500 mm Swing over bed: Ø 440 mm Centre height over bed: 220 mm Centre height over carriage: Ø 125 mm Spindle bore: Ø 56 mm Spindle speed: 18 - 1800 rpm, 36 steps Tailstock taper: MK 5 Drive power: 4 and 6.7 kW - Spindle speed via 2 motor speeds and 18 gearbox stages - Guide ruler for turning slender cones with automatic longitudinal feed Space requirement (L x W x H): 3100 x 1200 x 1450 mm Weight: 3000 kg Good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Nwsdsw Uf Hwepfx Ag Def Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] Nodpfx Aouhbyqog Djwf - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm grinding length:1000 mm centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t precision grinding machine with SONY digital display, coolant system, electronic hand wheel, Nwsdpfxjdmppqo Ag Djf separate electrical cabinet, emergency cut-off

Condition: used, Centre height 125 mm Distance between centres 400 mm Max. longitudinal travel 440 mm Grinding wheel 400x50x127 mm Nwjdpfxoylcpke Ag Def Max. grinding diameter 250 mm Max. table load 80 kg Max. workpiece weight between centres 80 kg Grinding wheel speeds: number (steps) 3, 1500-1800 rpm Angular displacement +/- 45° Workpiece spindle head: - stepless speeds 30-675 rpm - rotatable 90° Spindle taper 5 MT Tailstock taper 3 MT Table speed stepless 0.05-5.50 m/min External grinding wheel motor 3 kW Machine weight approx. 1500 kg

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Control system: FANUC 16 Key Features: External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. Nodey Elz Dopfx Ag Dswf For more information, photos, or pricing, please get in touch.

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 grinding length: 1.000/1.600 mm Center height: 175 mm (optionally more possible) Workpiece weight: 120 kg Further freely selectable options: Nedpfxofg S Uae Ag Djwf - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN operator interface - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - Dressing spindle for diamond form roll - balancing and grinding sensor system - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit Nsdot N Ivcopfx Ag Dowf • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7360.32, Machine: Studer S40-4 Serial number: 7360.32 Nwjdpfx Agjyilirs Dsf Year of manufacture: 1991 Control: Sinumerik System 3 Power supply: 22 kVA

Condition: good (used), cylindrical grinding machine Njdpfjtrgndjx Ag Dowf

Condition: used, Manufacturer: EuroProjet - Studio 54 Model : Armadio Oasis 1400 Type : Refrigerated cabinet Material: 304 stainless steel Capacity : 1315 L Working temperature: +2°/+8°C Digital temperature control Inside dimensions : W 54 x H 150 x D 70 cm Nsdpsx R Dhtofx Ag Dewf Outside dimensions : W 145 x H 205 x D 85 cm Weight: 300 kg

Condition: used, Distance between centers: 1000 mm Maximum external grinding diameter: 320 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø127 x 80 mm Maximum internal grinding diameter: 200 mm Center height: 175 mm Control type (CNC/manual): CNC CNC brand: FANUC Nodpfxexxmcgs Ag Dswf CNC model: 16GC Maximum grinding length: 1000 mm Maximum workpiece weight: 130 kg Main motor power: 7.5 kW / 2870 rpm Total power: 30 kW Internal grinding spindle power: 15 kW Max. workhead spindle speed: 30 - 750 rpm Voltage: 380 V / 50 Hz X-axis feed: 0.0001 – 5,000 mm/min Z-axis feed: 0.0001 – 10,000 mm/min Air pressure: 1.5 - 3 bar Coolant flow rate: 100 L/min Max. Z-axis travel: 1050 mm Max. X-axis travel: 275 mm Max. worktable swivel: 8.5º Workhead internal taper: M 5 Tailstock taper: M 3 Tailstock quill travel: 35 mm Dimensions (L x W x H): 3,687 mm x 2,000 mm x 2,090 mm Weight: 5,200 kg

Condition: used, Year of construction: 1982, grinding diameter:250 mm grinding length:650 mm centre height:125 mm internal grinding spindle rev.-stepless:9500-50000 U/min workpiece speeds -stepless:50-10000 mm/min grinding head swivelling:90 Grad Nedpfx Agscxxubo Dswf max. dia. of grinding wheel:400 mm spindle bore:30 mm grinding length - plunge feed:80 (100) mm max. grinding depth by internal grinding:ca. 170 mm max. bore diameter to be ground:90 mm feed speeds:240 mm/min max. workpiece weight:80 kg required cooling water:36 l/min centre distance:650 mm distance of workpiece spindle-taper cone:960 mm drive capacity - spindle motor:6,25 kW connected load:ca. 10 kW total power requirement:8,5 kW weight of the machine ca.:3,4 t dimensions of the machine ca.:3,9 x 2,5 x 1,85 m with Studer control, electric/hydraulic drive, variable speed, tailstock with fine adjustment and hydraulic back feed, work piece headstock with increased precision, table air , hydraulic removable dressing device, radius-dressing device, Hydro-Cyclone filter, automatic grinding wheel-balancing device, automatic dressing cycle with speed compensation

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Nsdpfx Agjw U Dt No Dewf Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Nodevwg Tmepfx Ag Djwf

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Nwodpjy Hgi Ssfx Ag Dof Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: excellent (used), For sale: horizontal planer/slotting machine from a renowned manufacturer: Ing. Karl Anderle, Steyr (Austria) Nwsdpfsy E N Tdex Ag Dof Robust, heavy-duty industrial machine – ideal for workshop, toolmaking or production. 📊 Technical data: Manufacturer: Ing. Karl Anderle Type: 40 Year of manufacture: 1962 Machine number: 948/336 Working speeds: 30 / 60 / 90 / 180 strokes/min ⚡ Motor data: Manufacturer: FFD Wien Type: DU 1.5/2/4 Power: 2 / 1.5 HP Supply voltage: 380 V Current: 3.3 / 2.9 A RPM: 2800 / 1400 rpm Frequency: 50 Hz 2-speed motor ✅ Condition: Used machine Normal signs of use Good technical condition Complete – as shown in the photos 📹 Video of machine operation available (WhatsApp) 🚚 Transport: Possible shipping on a pallet Personal collection Assistance with organizing transport available

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm Nsdpfx Aeyaq Nhog Djwf - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable Nodpfxoyardmo Ag Djwf - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW Nodpfx Agoyi Tn So Dswf - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Scope of delivery includes: 01x CS profile, used Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Weight per piece: approx. 45.00 kg Material thickness: approx. 2.5 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Nodpfx Ajx R Ambog Dowf General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will apply. These can be quoted separately depending on the delivery location and scope of supply.

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). ✔️ Condition: NEW ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks 📦 Set includes: ✔️ KSB pump Nodpfx Agoy Abr Hj Dewf ✔️ Power cable ✔️ Float switch ✔️ Documentation ✔️ Original packaging

Condition: excellent (used), I am offering a circulation pump from the renowned brand WILO, model TOP-E 40/1-10, equipped with electronic control. The pump is intended for heating systems, HVAC, and industrial applications. It features an electronic module with a display and operation adjustment, which allows for the optimisation of energy consumption and performance. 🔧 Technical data: Manufacturer: WILO Model: TOP-E 40/1-10 Power supply: 230V / 50 Hz Type: electronic circulation pump Connection diameter: DN40 (approx. 40 mm) Insulation class: F Degree of protection: IP43 Nodjy Abf Hepfx Ag Dswf Pressure: PN6 Medium temperature: up to 110°C Rotation speed: 850 – 2850 rpm Power: 30 – 570 W Current: 0.45 – 4.80 A 📦 Condition: Used item. Shows normal signs of use but is in good technical condition and fully functional. 📌 Additional information: Electronic operation regulation High-quality workmanship – made in the EU Ideal for central heating, industrial, and circulation systems Robust construction

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks. Nwedpfoy Ah Ibox Ag Djf

Condition: excellent (used), For sale: Becker VT 4.40 vacuum pump – a high-quality unit from the renowned German manufacturer Becker. This pump is ideal for industrial applications, CNC machinery, vacuum packaging, and automation. ⚙️ Technical data: Manufacturer: Becker Model: VT 4.40 Year of manufacture: 2009 Capacity: 40 / 48 m³/h Power: 1.25 / 1.50 kW Speed: 1420 / 1700 rpm Frequency: 50 / 60 Hz Max. vacuum: 150 mbar Country of manufacture: Germany 🛠️ Features: Oil-free (dry-running) vacuum pump Quiet and efficient operation Compact design Low operating costs Very popular model in the industry 📦 Condition: ✔️ Used ✔️ Very good visual condition ✔️ Normal signs of use ✔️ Ready for operation Nsdpfx Aeyz Dy Dsg Dewf 📌 Applications: CNC machinery vacuum packaging woodworking industry automation suction systems 📦 Included: Becker VT 4.40 pump as shown in the photos 🚚 Shipping: Courier or pallet shipping possible Personal collection also possible Assistance with transport organization available