Used Warp Beam for sale (4,604)

Year of construction: 1991, condition: ready for operation (used), These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible. Nedpfx Asw Tl Irjgrowl

Year of construction: 1996, condition: ready for operation (used), Load: 300-1500kg, weight: 1.43t, an inspection is possible. Nodpfx Agopcgyxsrswl

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS Nwsdpfx Aoy Spl Hjgrel WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, Year of construction: 2022, functionality: fully functional, KARL MAYER PROSIZE - HIGH-PERFORMANCE and INNOVATED SIZING UNIT for processing spun yarns -28 Pos : max. working width in the creel: 2200 mm -200 mm : working range -Beam creel :max. beam flange diameter: 1000 mm -Warp Tension Control -Automatic squeeze pressure control With all required accessories. Nsdpfx Agozb Uzwsrjwl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Njdsz A D Irjpfx Agrswl Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet Nwedpfx Aez Ay Rrjgrjl USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables Nodpfoxmfc Ujx Agrswl - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. Nodpfszlyv Tsx Agrewl

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment Nwedpozv Safsfx Agrjl - Ball tables - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Nsdpfxozv Twxj Agrswl - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing Nwedpfx Aoy Samusgrsl - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €49,900 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres Nwodpfszzdyzox Agrjl • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of cooling: water, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fridge, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. Nwedsy Dq E Sepfx Agrjl IN production, can be inspected on site. The price includes the chiller as well. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1984, Width: 84in, gauge: E24, yarn feed: EBC, hole needles: GB1-2-3, speed: 1,000rpm, pattern gear: N-gear GB1-4, yarn monitoring: Laser 4080, with brushing unit, an on-site inspection is possible. Njdoz Epruepfx Agrowl

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Njdpfxoz Erw Hj Agrswl Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Nwedjzc Rdqepfx Agrsl

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 10,000 kg, total length: 11,600 mm, total width: 2,560 mm, total height: 600 mm, input voltage: 220 V, type of input current: three-phase, input frequency: 60 Hz, TIR body/chassis repair frame for trucks and large-size vehicles TM-M60 Nsdpfovuxygjx Agrewl This is a professional device designed for comprehensive repair and straightening of various body and chassis elements of trucks, delivery vehicles and cars. Thanks to its solid construction and the equipment with 6 towers with high pulling force (25 tons each), this frame allows for effective performance of advanced repairs, such as restoring the shape of damaged elements, straightening distortions or eliminating warps. High load capacity and precise tools make our repair frame perfect for professional workshops, guaranteeing speed, accuracy and reliability during repairs of large-size vehicles. Parameters: - Hydraulic pressure: 70 MPa (10000 psi) - Pneumatic pressure: 0.8 MPa - Maximum column tension: 25 tons (245 kN) - Load capacity: 50000 kg - Column working range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: 1. With 6 towers, each with a maximum pulling force of 25 tons. 2. With a complete set of pushing and pulling tools, adapted to any type of straightening. 3. A lifting device with a capacity of 50 tons, which effectively repairs distorted beams. 4. With a 25 ton hydraulic arm that allows for the repair of distortions, bulges, twists, etc. 5. Four towers are 2500 mm high, and the other two are 4320 mm high. 6. Possibility to choose a color from the RAL palette. 7. Number of towers to be chosen by the customer.

Condition: good (used), functionality: fully functional, Year of construction: 2023, total height: 3,500 mm, total length: 12,250 mm, total width: 6,500 mm, load capacity: 100 kg, Used Yale single-girder crane system including a 100 kg hoist. The system is suitable for light to medium-duty internal lifting and transport applications in workshops, production environments, and warehouses. Technical specifications: Manufacturer: Yale Year of manufacture: 2023 Equipped with power conductors. Available span lengths: 12,250 mm (2x) Nwsdpeyyq Ilsfx Agrsl Transverse girders / trolley beams: Length: 6,500 mm Quantity: 2 pieces (each span length has 1 trolley beam and chain hoist) As shown in the pictures / dismantled from service including photos. For more information, photos, or a price quote, please feel free to contact us. Price per piece, starting from €2,500.00. 2 x Yale.

Condition: used, Year of construction: 2022, functionality: fully functional, D-Warper/22 Direct Warping Machine- Seri Çözgü Makinası 15 kw Nwjdpsy R U Epofx Agrjl Working Width : 2200 mm Capacity of Creel 960 Supply Voltage : 3x400

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Nwjdpfx Asz A S Dzegrsl Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Condition: good (used), Year of construction: 2007, functionality: fully functional, load capacity per storage section: 11,500 kg, total length: 390,000 mm, total height: 7,000 mm, total width: 1,000 mm, shelf height: 7,000 mm, support length: 2,700 mm, shelf length: 51,300 mm, load capacity: 1,000 kg, load capacity per stand: 11,500 kg, frame height: 7,000 mm, load per truss pair (max.): 3,000 kg, frame width: 85 mm, axle spacing: 2,700 mm, mesh size: 2,700 mm, number of shelf rows: 7, pallet spaces: 1,845 euro pallets, construction width: 27,003,600 mm, For sale is a comprehensive used pallet racking system, predominantly from STOW, with additional sections from Link 51 and Allclick. Nwodpfx Aozugtdsgrjl The system has already been completely disassembled, sorted, and is ready for loading at any time. Negotiable price: €32,000 net The offer includes: STOW 95 pcs. frames, height 7,000 mm, depth 1,000 mm 720 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet STOW 20 pcs. frames, height 7,500 mm, depth 1,000 mm 114 pcs. beams, length 3,600 mm Load capacity approx. 1,000 kg per pallet LINK 51 17 pcs. frames, height 7,500 mm, depth 1,000 mm 120 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet ALLCLICK 8 pcs. frames, height 7,200 mm, depth approx. 1,000 mm 95 pcs. beams, length 3,600 mm Load capacity approx. 640 kg per pallet Total: 140 pcs. racking frames 1,049 pcs. beams Also available: Back panel mesh covering an entire row of racking approx. 51,300 mm length × 7,000 mm height Impact protection various racking accessories The entire system was documented with photos, videos, and drone footage before disassembly. The racking system has already been completely dismantled and can be loaded or picked up at any time. Inspection and loading are possible by arrangement. Partial sale or sale of individual systems or larger sub-sets is possible by agreement.

Condition: ready for operation (used), functionality: fully functional, Used lifting beam / spreader beam for rescue crane, length 2100 mm, beam width 60 mm. Please, no inquiries via email! If you have any questions, please contact us by phone. Nwodpfx Ajz Egd Iegrsl Inspection and collection are only possible after prior telephone appointment! Subject to changes, prior sale, and errors.

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 4,200 kg, fork length: 1,200 mm, empty load weight: 1,000 kg, Travel Fork width: 150 mm Fork thickness: 50 mm Technical condition: very good Nedpfx Agsz Evpmerswl Description: Width 5900 mm, Height 1350 mm

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Nsdpsyz An Tjfx Agrswl

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimensions 2,240 x 880 mm, motorized height-adjustable counter supports, 4 pressure beams, individually switchable on and off, 4 swing grids, available from Seevetal location, sold "as is" and as inspected, Ex works, excluding transport, subject to prior sale. Njdpfxoul Uy He Agrewl