Used Washer - Top-Loaders for sale (13,145)

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - maximum loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 litres - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900h mm Gijdsd H Slaspfx Ahvou Kerb weight: approx. 220 kg Wash timer freely adjustable (minutes and hours) complete cleaning machine (interior and exterior cladding) made in stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bathroom cover with fine filter (2,000 micron) Intake filter as pump protection Oil skimmer for bath maintenance Operating hour counter Steam swath extraction incl. condensate recirculation Part washer is as good as new (test plant/technical plant) OTHER KORBDIMENSIONS ON REQUEST !!! AVAILABLE

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Gisdpfxjv Sa I Te Ahveu While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Year of construction: 2021, condition: new, Intersonik top loader rotary basket washers are a quick and economic solution to your parts washing needs. It is easy to use and nature friendly. Top loading mechanism makes the product easy for loading and unloading the washing basket. High-pressure water is sprayed via positioned nozzles during the washing cycle at the same time basket is rotated for even better washing quality. Gisdjhcimzopfx Ahveu Technical details of the top loader spray washer is listed below: Nr. - Item - Details 1 - Machine dimensions - 850 x 850 x 1000 mm 2 - Loading height - 750 mm 3 - Loading capacity - 380 mm 4 - Stainless steel body - AISI 430 (1.5-2 mm) 5 - Pump power and number - 2.5 hp x 1 6 - Pump body - AISI 304 7 - Total heating power - 15 Kw 8 - Electricity - 380 V / 3 Phase 9 - Timer - 0-30 min 10 - Thermostat - 0-90 C 11 - Basket and nozzles - Galvanized coating 12 - Electrical components - ABB and Schneider or equivalent 13 - Pneumatic components - Mag and Festo or equivalent 14 - Oil skimmer - Available 15 - Drying fan - Optional 16 - Rinsing tank - Optional 17 - Ebara pump - Available 18 - Liquid level sensor - Optional 19 - Automatic liquid filling - Optional 20 - Mist exhaust fan - Optional

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out - Level monitoring and automatic fresh water refill - Insulation of the entire system - Hot air drying (output: 11.6 kW) Giodpfx Ahofbt Sisvou - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)

Condition: good (used), Loos 8000kg/h. Bj.2001. top condition. incl. Weishaupt burner G70 Gisdpfjm Rhd Dox Ahveu

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Gisdpfsvi Eypex Ahvju Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: Giedpfspdqzxsx Ahveu - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), - TOPSOLID’PDM SERVER license - TOPSOLID’DESIGN PRO license with USB dongle - TOPSOLID’DESIGN PRO + CAM M2 + PP HAAS – FANUC license with USB dongle Giodpfx Aezbyb Njhvsu

Condition: good (used), Year of construction: 2016, FOR SALE CNC Lathe TOP TURN S20C – Year 2016 Brand: TOP TURN (Distributed by major machine tool networks) Model: S20C Year: 2016 CNC Control: FAGOR (User-friendly interface for teaching cycles and ISO programming) Technical Description This 2016 CNC lathe is a versatile machine, ideal for precision work in small to medium production batches. Its modern design offers excellent rigidity and very quick set-up, thanks to the Fagor control system. Capacity: - Swing over bed: 400 mm - Swing over carriage: 210 mm Giedey Slttopfx Ahveu - Distance between centers: 1,000 mm - Bed width: 300 mm Spindle: - Spindle bore: 52 mm (Comfortable bar capacity) - Spindle speed: Up to 2,500 rpm - Spindle nose: Camlock D1-6 Included Equipment - FAGOR CNC: Color screen, cycle-assisted programming (ideal for operators used to conventional machines) - Turret: Automatic turret (electric/hydraulic) for fast and programmable tool changes - Chuck: Precision 3-jaw chuck (approx. 200 mm diameter) - Tailstock: CM4, robust - Safety: Fully enclosed machine with interlocked sliding doors, compliant with CE standards - Coolant system: Centralized with integrated chip tray Highlights - Recent (2016): Modern electronic and mechanical components, easy to source spare parts - Precision: High-precision ball screws on both axes - Compact: Small footprint relative to its machining capacity Weight and Dimensions - Dimensions: Approx. 2,400 x 1,400 x 1,700 mm - Weight: Approx. 1,800 kg

Condition: excellent (used), I am offering a circulation pump from the renowned brand WILO, model TOP-E 40/1-10, equipped with electronic control. The pump is intended for heating systems, HVAC, and industrial applications. It features an electronic module with a display and operation adjustment, which allows for the optimisation of energy consumption and performance. 🔧 Technical data: Manufacturer: WILO Model: TOP-E 40/1-10 Power supply: 230V / 50 Hz Type: electronic circulation pump Connection diameter: DN40 (approx. 40 mm) Insulation class: F Degree of protection: IP43 Pressure: PN6 Medium temperature: up to 110°C Rotation speed: 850 – 2850 rpm Power: 30 – 570 W Current: 0.45 – 4.80 A 📦 Condition: Gijdpfx Ahoy Abf Hoveu Used item. Shows normal signs of use but is in good technical condition and fully functional. 📌 Additional information: Electronic operation regulation High-quality workmanship – made in the EU Ideal for central heating, industrial, and circulation systems Robust construction

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Gsdpfx Ahoy Titgoveiu Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Gsdpfoww Hx Iox Ahveiu

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Gijdjx Nqi Iopfx Ahvsu Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm maximum bar length: 3300mm

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Giodpfxsfz Dvvj Ahveu ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Giodpfxofz Ax Sj Ahvsu The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Gjdpfxeflpmqs Ahvsiu ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Gsdpfx Aofzrapohvoiu ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Godofz A D Nspfx Ahvjiu • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2014, condition: excellent (used), Bar feeder Top Load 4-25 Gedpey Rzc Iefx Ahveiu Machine no. BRS 14022870, Year of manufacture: 2014

Condition: new, Year of construction: 2026, container length: 6,000 ft, color: white, overall weight: 1,900 kg, maximum load weight: 3,500 kg, empty load weight: 1,900 kg, loading space volume: 34.5 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,400 mm, Modular container. We can manufacture it according to the customer's requirements, and we can also partition it and equip it with a kitchenette and a bathroom. Gjdpoy T Ifnefx Ahvsiu

Condition: good (used), functionality: fully functional, mileage: 17,300 km, power: 88.26 kW (120.00 HP), fuel type: diesel, empty load weight: 5,430 kg, overall weight: 10,500 kg, axle configuration: 4x4, fuel: diesel, Year of construction: 1986, Equipment: all wheel drive, TOP CONDITION Godpfx Ajxm S Abjhvoiu

Condition: repair required (used), Year of construction: 2019, functionality: not functional, machine/vehicle number: BB19076267, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm Giedpfx Ahexx Shueveu - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Maximum Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually exchangeable, made from Vulkollan-type plastic to support high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar stabilization. - Remnant Handling: Provides rear extraction using a self-centering extractor or front ejection option. - Repositioning System: Optional rail system allows for up to 600 mm of axial or radial displacement for lathe maintenance. - Automation: Fully controlled by a PLC with brushless motor and digital pneumatic valves to manage speed and thrust. - Bar Storage: Single-level magazine with 235 mm bar capacity. Machine status: NOT WORKING # Set of guides and accessories for bar clamping included # Bearing set for the pusher head "Pusher head bar" included

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: Gsdpfsxx R Nqex Ahvsiu - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Gsdpfxsy I Nugs Ahvjiu Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: used, TECHNICAL DETAILS - Bar diameter : 8-100 [mm] Gsdpfxeyzi U He Ahvsiu - Bar length : 1550 [mm] - Adjustable bar feed speed : 80 [m/min]