Used Watson-Marlow Watson Marlow 620 Du/R Peristaltic Pump for sale (73,277)

Condition: used, This listing is for the Watson Marlow 620 Du/R Peristaltic pump The unit is in full working condition and is ready for immediate use The 620DU is a process peristaltic pump (i.e. hose pump) designed for metering, dosing, and transfer of fluids. Because it is a peristaltic design, the fluid is contained entirely within the tubing, avoiding contact with internal moving parts (other than the tubing). It is suitable for remote control, automation, and integration into control systems (SCADA, factory logic, etc.). Wide control range & precision: The large turndown (2,650:1) gives flexibility to handle both very low and high flow rates with fine control. Remote / automation capabilities: Because it supports analog and digital interfaces, it’s well-suited for integrated systems. Pump protection & security: PIN locking helps avoid unintentional changes in process-critical applications. Low maintenance on non‑wetted parts: Since only the tubing contacts fluid, mechanical wear is mostly on the tubing, making part replacement simpler. Safe to run dry: Peristaltic pumps typically tolerate running dry without damage (unlike many positive displacement pumps). Podpfexhdt Isx Aflopw Reversible / ability to back‑flush: This is helpful when attempting to clear lines or avoid clogging. Limitations / Considerations Tubing wear / life: The hose or tubing is the consumable component. Chemical compatibility, pressure, and mechanical stress affect how often tubing needs replacement. Upper pressure / flow limit: While it handles decent pressure (~2 bar standard, possibly up to 4 bar variant), it’s not suited for very high-pressure pumping tasks. Enclosure limitations (non-“N” model): The standard 620DU is not fully sealed, so it may not be ideal for wet or harsh environments unless you use the “N” variant. Cost / complexity: More features, interfaces, and protection can make the system more complex (and costlier) to configure, install, and maintain.

Condition: used, This listing is for 1 of 7 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality Podpfxsxhdx Ds Aflspw The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Pedpfx Asxv Apweflepw Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Ppodpfoygmdhjx Aflew Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Ppjdpfxexv Da Rj Aflsw Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, This listing is for 1 of 2 Watson Marlow 505S Peristaltic Pump. The unit is in full working condition and is ready for immediate release. Ppodpjxx Aicofx Aflsw Experience precision and reliability with the Watson Marlow 505S Peristaltic Pump, expertly designed for the safe transport of liquids while maintaining a contamination-free environment. Ideal for delivering culture media, buffers, and various solutions, this versatile pump is a valuable addition to any laboratory. Key Features: Variable Rotor Speed: With a rotor speed range of 2-220 rpm, the 505S allows for customizable flow rates to suit your specific application needs. Compact Design: Measuring just 25 x 30 x 12 cm, this pump's compact size makes it perfect for laboratory settings where space is at a premium. Flexible Electric Supply: Compatible with both 100-120V and 220-240V power sources at 50/60Hz, ensuring versatility in different laboratory environments. Technical Specifications: Manufacturer: Watson Marlow Benefits: Contamination-Free Operation: The peristaltic design ensures the liquid only comes into contact with the tubing, protecting both your samples and the pump from contamination. Versatile Applications: Whether you're working with culture media, buffers, or other solutions, the 505S is designed to handle a wide range of laboratory tasks efficiently. Accessory Options: Enhance your pump's capabilities with various pump head options, such as the 508MC2 Eight Roller Two Channel Micro Pump head and the Easy Load Drive Head, allowing for even greater adaptability. Choose the Watson Marlow 505S Peristaltic Pump for a dependable, high-performance solution that meets the demands of your laboratory. Achieve consistent results and streamline your liquid handling processes with this exceptional peristaltic pump.

Condition: used, This listing is for 1 of 2 Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider Ppsdpfx Afexv Ak Islew It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. The user interface is designed for operational simplicity and clarity. Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement

Condition: used, This listing is for 1 of 3 Watson Marlow 630S Peristaltic Pumps These units are in full working condition and ready for immediate use A peristaltic pump moves fluid through a flexible tube by sequentially compressing the tube (like a wave) which pushes the fluid forward. Because only the inner surface of the tube contacts the fluid, the pump mechanism is isolated from the fluid — this is useful for: Handling corrosive, abrasive or sterile fluids Avoiding contamination (the pump body doesn’t contact the fluid) Easy maintenance (replace the tubing rather than the pump’s internal components) Watson‑Marlow is a well-known maker of such pumps in lab, process, pharmaceutical, chemical, water treatment, and industrial settings. Typical applications / use cases Psdpfjxhdtbjx Aflopw Because of the flexibility, purity, and control of peristaltic pumps, the 630S is used in: Chemical dosing / metering (acid, base, reagents) Pharmaceutical / biotech processes Water / wastewater treatment Food & beverage (for sterile or food-contact fluids) Laboratory and pilot-scale processing

Condition: used, This listing is for a Watson Marlow 120S/DV Peristaltic Pump. The unit is in full working condition and is ready for intimidate release. Introducing the Watson-Marlow 120S/DV Peristaltic Pump, a cutting-edge solution designed for precise and reliable dosing and metering applications. This versatile pump is ideal for laboratories and cleanroom environments, offering exceptional performance for a wide range of fluid transfer tasks. Key Features: Flexible Control Options: Choose between manual remote control or automatic operation via 4-20mA or 0-10V inputs, providing adaptability to your specific workflow needs. Impressive Flow Rate: Achieve flow rates from 0.001 to 170 mL/min at 30 psi, making it suitable for both low and high-volume applications. High Motor Speed: With a motor speed range of 0.1 to 200 rpm, the 120S/DV allows for precise adjustments to match your process requirements. Versatile Tube Acceptance: Compatible with 1.6mm wall thickness tubing in five materials, accommodating internal diameters from 0.5 to 4.8mm for diverse applications. Technical Specifications: Model: 120S/DV Ppodexx Aktepfx Afljw Pump Head: 114DV flip-top pump head Operating Characteristics: Compact and stackable design, perfect for installation in cleanrooms, LAF, and biosafety cabinets. Benefits: Maintenance-Free Design: The 120S/DV features a virtually maintenance-free operation with no costly seals, valves, or rotors that can leak or clog, ensuring longevity and reliability. User-Friendly Features: Speed scrolling, priming, and keypad lock functions enhance usability, making it easy to operate in fast-paced environments. Safety and Compliance: This pump meets international safety standards, including UL and CSA certifications, and complies with electromagnetic compatibility standards, ensuring peace of mind in critical applications. Elevate your liquid handling processes with the Watson-Marlow 120S/DV Peristaltic Pump—the perfect combination of precision, reliability, and user-friendly design for all your dosing and metering needs. Experience the difference today!

Condition: used, This listing is for 1 of 3 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working condition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top. 323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels Pedpfxoxx Arwj Aflopw • Flow rates to 2000ml/min and 133:1 speed control ratio 323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing. 323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids. For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images Serial# H041702 Dims 27cm (D) x 22cm (W) x 12cm (H)

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. Psdpfx Asxv Affsfljpw The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, This listing is for a Watson Marlow 520S Peristaltic Pump. (1 of 7 Available) The unit is in full working condition and is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to Podpfjxv A Uyex Aflepw clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications. 520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging. Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump Podpfx Aoxv Ad Ueflepw The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Pedpfxexv A Ako Aflepw Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, This listing is for the Watson Marlow 323 Peristaltic Peristaltic Pump The unit is in full working condition and is ready for immediate use The 323 series from Watson‑Marlow is a benchtop “cased” pump line (sometimes called peristaltic or rotary tubing based pumps) designed largely for laboratory and light industrial applications. Key features include: A drive unit (“drive”) plus interchangeable pumphead/tubing to suit different flow rates, tubing types, chemical compatibilities. Versions available with different levels of control: manual speed control; auto/remote control; analogue inputs/outputs; RS‑232 etc. Ppedpfsxhdu Esx Aflow A membrane keypad and digital LCD on most models to set/display speed etc. Build is robust: chemically resistant ABS top, IP31 protection rating

Condition: used, This listing is for the Watson Marlow 313X Extension Rapid Load Pump Head The unit is in full working condition and is ready for immediate release Key Features Watson Marlow 313X Peristaltic Pump Head The Watson Marlow 313X is a robust, single-channel peristaltic pumphead known for its precision, versatility, and ease of use. Designed for lab, diagnostic, and OEM applications, the 313X features a flip-top rapid-load mechanism, allowing quick and secure tube changes while maintaining consistent flow performance. Roller Configuration: 3-roller or 4-roller Max Flow (3-Roller): Up to 2000 mL/min Max Flow (4-Roller): Up to 1200 mL/min Max Speed: 400 rpm Ppjdjxv D Inspfx Aflow Compatible Tubing Sizes: 0.5 to 8.0 mm ID Wall Thickness: 1.6 mm Max Continuous Pressure: Up to 2.0 bar (depends on tubing) Materials: Back: Glass-filled polypropylene Front: IXEF Rotor, Clamps, Mounting Plate: Glass-filled nylon Rollers: MoS₂-filled nylon Accepts 1.6 mm wall standard tubing Quick, error-free tube loading with flip-top design—automatically positions and tensions tubing Add up to five extension pump heads (depending on tubing type and size) Modular design—easily expand pumping capacity Durable construction with chemically resistant materials

Condition: good (used), The pump was used for pumping beverages in a bottling plant and is equipped with the starting electrics. The pump stands on a mobile frame and is mobile. Psdpjpbwggsfx Afljpw

Condition: good (used), Watson Marlow 120U/DV peristaltic pump *New price 9100 The 100 series pumps are the ideal choice to maximize yield in fermentation and cell culture applications. These pumps offer not only high performance and reliability, but also ease of use for single-use systems. A flawless tube change takes only a few seconds, further increasing the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series, with its exceptional speed range of 2,000:1, offers the flexibility and purity essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: Protection class housing IP 31 Maximum pressure 30 psi Ppodettzgdspfx Aflsw Model 120 U/DV Flow rate 0.001 to 170 ml/min at 30 psi Motor speed 0.1 to 200 rpm Temperature 5 °C to 40 °C Pump weight approx. 2 kg Torque 0.4 Nm continuous operation Noise level < 60 dB(A) at 1 m distance Standard CE, cETLus Power supply Supplied with 24 VDC mains transformer plug Condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: good (used), Watson Marlow 323S/D Peristaltic Pump *New Price €9890 The 323 series pumps feature a chemical-resistant ABS housing and IP31 protection, as well as a membrane keypad for pump control and a digital LCD for displaying the speed. 323S high-performance pumps with manual control Pjdpfx Afjtnct Ujljpw Universal pump for precise dosing or transfer applications Flow rate: 0.1–2000 mL/min Speed ​​range: 3 to 400 rpm (adjustable in 1 rpm increments) Display type: LCD Reversible: Yes The 323 series pumps feature a chemical-resistant ABS housing and IP31 protection, as well as a membrane keypad for pump control and a digital LCD for displaying the speed. Dimensions (L x W x H): 230 x 230 x 132 mm Condition: Used Financing through our bank is also available. komplett-konzept.leasingo.de Find more laboratory equipment – ​​new and used – in our shop! International shipping costs available upon request!

Condition: used, functionality: unexamined, KSB Industrial Centrifugal Pump Heavy-duty industrial centrifugal pump, complete with a high-efficiency Siemens IE3 electric motor, mounted on a steel base frame. The unit has been professionally dismantled from an industrial production facility and is available immediately from our warehouse in Rotterdam, The Netherlands. Suitable for water, cooling water, and a wide range of industrial process applications. Technical Specifications -Pump Manufacturer: KSB -Pump Type: Industrial Centrifugal Pump -Motor Manufacturer: Siemens -Motor Efficiency: IE3 Premium Efficiency -Motor Power: 55 kW -Voltage: 400 / 690 V -Frequency: 50 / 60 Hz -Speed: 1482 rpm (50 Hz) -Protection Class: IP55 -Mounting: Steel base frame -Condition: Used -Location: Rotterdam, The Netherlands Ppodpfjzltmlsx Aflew SURPLUS – Industrial Solutions From Surplus to a Second Life

Condition: new, Coherent OEM laser diode pump module / laser block LDP.1108303, unused, 100% functional, scope of delivery as shown in the photos. Podpfx Afjzkc Upjlspw

Condition: used, functionality: fully functional, Thermo Scientific FH100X NO.72-320-100 Peristaltic Pump. Ppedpfjupvvkex Aflow Thermo Scientific FH100X peristaltic pump is ideal general purpose tubing pumps for high-repeatability, precision metering, and worry free performance in a variety of life science, industrial and process applications. The broad flow range capability of this unit make them ideal for laboratory to pilot process scale-up requirements. FH100X unit, our highly regarded peristaltic pump technology is combined with innovative digital control to provide robust performance at an economical value. This unit offer a reliable alternative to lab piston metering pumps, gear pumps and small circulating pumps used in life science laboratory applications. This stackable, variable speed pumps are self priming, able to operate dry, and contain no valves or seals eliminating replacement needs. Fluid contacts only the tubing, providing for contamination-free pumping in high-purity applications. Good working condition. Please check out our other listings as well.

Year of construction: 2007, condition: ready for operation (used), A Rösler circular vibratory finishing machine is available. Working bowl volume: 620l, bowl outside diameter: 1650mm, working channel width: 430mm, speed: 1485rpm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Ppodpfjzlt Nyox Aflsw

Condition: excellent (used), Year of construction: 2015, operating hours: 77,212 h, For sale is a mass finishing machine from the manufacturer Rösler, type R 620 Euro including centrifuge. The machine is in very good condition and can be inspected on site. Ppjdpfx Aetqlqioflew

Condition: excellent (used), mileage: 822,000 km, power: 456 kW (619.99 HP), first registration: 04/2010, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel, total length: 8,450 mm, total width: 2,500 mm, total height: 3,100 mm, Year of construction: 2010, Equipment: ABS, AdBlue, air conditioning, differential lock, electric window regulation, retarder, second fuel tank, = Additional Options and Accessories = - Leaf spring suspension Ppodpfszhglmsx Aflow - Sleeper cab = Further Information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 1: Dual tires; Differential lock; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40%; Reduction: External planetary axles Rear axle 2: Dual tires; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40%; Reduction: External planetary axles Number of cylinders: 8 Technical condition: good Optical condition: good