Used Weeke Dowel Boring Machine for sale (65,415)

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Götzinger Drilling and Milling Centre ----- Cedov N N Spopfx Adrorh For sale on behalf of a client! Machine for ‘left-hand’ and ‘right-hand’ parts. The machine was controlled via window-making software, but can also be operated via the machine’s own software. The machine is equipped as follows: - Drilling units on the left and right for end-face drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once and the unit carrier then moves to perform the various machining operations. Machine installation length approx. 6 m. For further information, see the attached PDFs.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. Codpfoyy Rtzex Adrjrh The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: excellent (used), Year of construction: 1977, overall weight: 370 kg, Ayen automatic nut runner with a large number of tools. Crsdpfx Aez Ekqledrsh

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar Codpfxjv Nptmj Adrjrh 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual side adjustment

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: Csdpfxsym Nvto Adrsrh CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation.

Condition: used, Year of construction: 2015, The machine is suitable for precise and efficient drilling and dowel insertion in furniture production. Technical specifications: Csdpjz Incdefx Adrjrh Year of manufacture: 2015 Machine dimensions: 2.6 × 1.6 m 3 × vertical drills 3 × horizontal drills X, Y, and Z axes – NC controlled and computer-adjustable Barcode scanner Uses dowels with a diameter of 8 mm Machine is in good condition The machine is available for inspection by prior arrangement. For additional information, pricing, or to arrange an inspection, please contact me.

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm Codpfjzbunkex Adrorh - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Csdez Dt Hyjpfx Adrsrh Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Csdpfxowuz S Do Adrerh Lateral horizontal groups: yes

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Cjdpfx Adjv Trlmererh Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2003, Rilesa VLG 1524 3 drilling units from above Csdpfxsu Shzfs Adrerh 2 right/left aggregates

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) Crsdpfxjxdttio Adreh - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Codpfx Aoxxi T Uedrjrh Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Year of construction: 2018, machine/vehicle number: 432.10.507.19, type of input current: three-phase, overall weight: 340 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, power: 1.5 kW (2.04 HP), We offer this used Felder FD 21 pro dowel drilling machine, manufactured in 2018. Type: FD 21 pro Serial number: 432.10.507.19 Code: 7502 Crsdpfxszuwgus Adroh Voltage: 400.0 V Number of phases: 3 Frequency: 50 Hz Current: 3.35 A Power: 1.5 kW Year of manufacture: 2018 Country of manufacture: Austria If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-253-05-4317, workpiece height (max.): 60 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, controller model: Powercontrol PC85T mit Woodwop software, TECHNICAL DETAILS Process: horizontal drilling – injecting adhesive – driving in dowels Workpiece length min/max: 20 mm / 1,250 mm Workpiece width min/max: 50 mm / 800 mm Workpiece thickness min/max: 10 mm / 60 mm MACHINE DETAILS Control system: Powercontrol PC85T with Woodwop software Dowels: 8 mm x 30 mm, 8 mm x 35 mm Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Cedezhm Sgepfx Adrjrh Drilling unit: 1 drilling and dowel insertion unit, freely programmable Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical clamping cylinders Double diaphragm pump 1:1

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm With chassis Cedpfx Adsxx D D Ijrerh Weight 420 kg Availability: short-term Location: Flörsheim

Condition: used, Used dowel drilling machine, Scheer DB 12 3 drilling spindles, pitch 32 mm Maximum drilling depth: 45 mm with a drill length of 80 mm Maximum drilling depth: 70 mm with a drill length of 105 mm Operation: foot pedal Number of material clamps: 1 Type of material clamping: pneumatic Table size: 400x250 mm Weight: approx. 130 kg Dimensions: approx. 1350x650x950 mm Cjdpszpv Rzefx Adrorh Motor power: 1.1 kW

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical Crjdpfx Adjz I Eggjreh the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: good (used), Year of construction: 1982, functionality: fully functional, Power 380V 3.3A Motor power 1.1kW 2800 rpm Automatic pneumatic control with control panel Drill head with 23 spindles, pitch 32 mm Drill hole depth adjustable drill shaft 10 mm position adjustment 5-60 mm Clamping height 80 mm Passage width 800 mm Dimensions: 1200 x 900 mm Weight approx. 400 kg 1x setting gauge row bore Crodpfx Adeq Auwtorjh 1x setting gauge side stop 1x stop ruler 1500 mm 1x fence 2000 mm

Condition: new, Bore diameter variabel mm Number of heads horizontal 1 St. Number of heads vertical 0 St. Götzinger drill, dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ----- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ----- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ----- 1 press-in station with dowel separation and press-in cylinder item 4 ----- 1 oscillating conveyor for dowels d 8 x 60 mm with feed hose into the injection unit item 5 ----- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ----- Csdpju Uu Uzofx Adrjrh 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software be prepared. Our machine can then read and process this data. ----- Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ----- item 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,565.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. ----- (technical data according to the manufacturer - without guarantee!)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION 21 drilling spindles with quick-change system; five quick-change chucks included in delivery Heavy-duty steel worktable; five quick-change chucks included in delivery Patented system for fast and easy adjustment of drilling depth via spiral disc Pneumatic drill head swiveling, allowing drilling in any position between 0° and 90° Fold-down cast iron side stops with round bar guide Side stops easily adjustable and lockable to millimeter scale using magnifier Height adjustment of drill head via counter Two positionable pneumatic clamping cylinders With a spindle center distance of 640 mm, it is possible to process two workpieces of 316 mm width each SCOPE OF DELIVERY Two pneumatic pressure cylinders Five quick-change chucks Two stop rails, each 1.5 m long Four fold-down stops for the stop rails One setting gauge for fine adjustment of the fold-down stops on the stop rails TECHNICAL DATA Dimensions and Weights Worktable length 885 mm Cjdpow I Uqljfx Adrorh Worktable width 332 mm Product length approx. 1015 mm Product width/depth approx. 990 mm Product height approx. 1270 mm Net weight approx. 260 kg Electrical Data Rated input power 1.5 kW Delivered power 1.1 kW Motor duty cycle S3 Connection voltage 400 V Mains frequency 50 Hz Noise Emission Sound pressure level 78.3 dB(A) Pneumatic Connection Working pressure 6 – 8 bar Spindle Maximum drilling width 640 mm Maximum drilling depth at 90°: 65 mm Number of spindles: 21 Spindle distance 32 mm Center distance first to last spindle: 640 mm Spindle spacing sufficient for two workpieces of 316 mm each Spindle speed: 2800 rpm Drill head swivel range: 0 – 90° Maximum workpiece height: 130 mm Extraction Extraction nozzle diameter: 80 mm Including optional accessories: 2 pcs. Additional pneumatic pressure cylinders for MDB 21/23/29 PRO 17 pcs. Quick-change chucks for MDB 21/23/29 PRO 1 pc. Setting gauge for rear fence distance for MDB 21/23/29 PRO 1 pc. Reference pin for line drilling for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Codot Ndznopfx Adrsrh Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing .

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training Codpfed Ih Hqox Adrorh (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation Crsdpfx Adoz Hvyzorjh All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails Codpfx Aoy Saw Hsdrerh - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually