Used Weinbrenner Gp 50 for sale (34,490)

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min Dkjdpju Ib D Esfx Akher stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, Year of construction: 1995, machine/vehicle number: 1453G, functionality: fully functional, operating hours: 71,614 h, pressing force: 80 t, stroke length: 340 mm, table width: 2,550 mm, table length: 2,550 mm, overall weight: 7,800 kg, A YouTube video demonstrating the operation is available! We offer this used Weinbrenner GP 80-2550 press brake for sale. The control system was upgraded to a Cybelec VisiTouch Pac in 2023. The press brake is in good condition, well-maintained, and currently still in production. Over the years, various components have been renewed (drive motor, belts, guides, rear stop fingers, compressed air lines, etc.). The machine received service from B+Z in 2026. A large amount of tooling is included. 2 upper tool sets and 1 lower tool set (3V die) have been re-sharpened by UKB; invoices are available. The machine has UKB adapter strips in the lower tool, allowing the use of lower tools with the Trumpf system. A laser angle measurement system from Data M Engineering (Laser Check) has been installed on the machine. Upon purchase of the machine, the buyer will receive comprehensive training on its operation. The machine is being sold because we have had a second Weinbrenner with a 3m bending length for a year. This became necessary because a flatbed laser with a 3m processing length was also acquired a year ago. Since we now need the space of the old press for final assembly, it is being sold. Location: 82538 Geretsried Equipment: - Factory number: 1453G - Year of manufacture: 1995 - Working width: 2550mm Djdpfjzmmwtsx Akhjkr - Controlled axes: Y1, Y2, Z1, Z2, X, X1, R, 2x bending assist, crowning, die shift - Hydraulic ram clamping - Hydraulic die clamping - 2 bending assists - Control system upgrade to Cybelec VisiTouch Pac in 2023 - Weight: 7800 kg - Press force: 80 tons - Ram stroke: 340 mm If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Dedpown Ebisfx Akhokr Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Press force: 200 t Bending length: 3050 mm Frame width: 2550 mm Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Dkodpfx Akeim R N Hsher Equipment: - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning - Hydraulic ram clamping - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: good (used), Year of construction: 1992, functionality: fully functional, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Ram stroke: 274 mm Control: Cybelec ModEva Pac Dodoxb Sugepfx Akhokr Approx. machine weight: 17,000 kg Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, overall weight: 18,500 kg, controller model: Cybelec DNC 1200, working width: 3,550 mm, bending force (max.): 250 t, distance between stands: 3,000 mm, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg Dodpfx Aox I Ebiskhokr EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Dkodewxb Igepfx Akhjr

Condition: used, Year of construction: 1988, pressure 100 t chamfer lenght 2050 mm distance between columns 1550 mm throat 250 mm stroke 200 mm adjustment of press crosshead 200 mm stroke speed - idle stroke downwards 105 mm/sec stroke speed - idle stroke upwards 180 mm/sec stroke speed - under load 9,5 mm/sec table width 200 mm table height over floor 900 mm Dkodpetqqyqofx Akhjr dayligth 280 - 480 mm back stop - adjustable 3 - 729 mm control CYBELEC SYNCHRO control CNC 7400 PS total power requirement 7,5 kW weight of the machine ca. 10 t dimensions of machine L x W x H 3,70 x 2,00 x 2,80 m - 4 axis controlled - Accessories: programmable back gauge, table extensions, various upper and lower dies segments

Year of construction: 1986, condition: ready for operation (used), Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible. Dksdpfx Aoywlp Eekhjr

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12570 € 241.34 € 50 mm MK 4 350 mm 93 - 152 - 204 - 298 - 44 U/min 3 kW M35 480 mm 755 mm 2265 mm 435 kg 0,1 / 0,18 / 0,24 mm/U 180 mm 150 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Gear drive 3 aut. feeds sliding machine table solid drill head tiltable turntable front wheel for sensitive fine feed (sample photo) Dkodpfxewiq Hys Akher OPTIONS (PRICES ON REQUEST): lighting equipment L coolant equipment and machine base with T-slots ERB Reverse for tapping IR/RS

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. Dodpfxezmnike Akhskr The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.

Condition: used, Year of construction: 1994, pressure 160 t chamfer lenght 3050 mm distance between columns 2550 mm stroke 400 mm Dsdpfxszfav To Akhskr throat 250 - 400 mm weight of the machine ca. 15.400 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, Press force: 160 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 250 - 400 mm Machine weight approx.: 15,400 kg Equipment: -Hydraulic tool clamping, top and bottom -Cybelec DNC 900 control system -Die shifting -Compensation -2-hand foot control -Controlled axes: y1, y2, x, R, z1, z2 Dodszd S Tzjpfx Akhskr -Tool set

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator Dkedpfocvkalex Akhjr The differential air pressure switch Controller minimum gas pressure Luc overall control.

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg Djdjb N Erbepfx Akhskr

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec work height max. 1050 mm Number of working hours 32.495 h oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm Dedexachujpfx Akhekr ----- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Djdpfx Aeu Nlk Sekhokr

Condition: used, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump Djdpotzrgvsfx Akhekr -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type 0 510 415 314 -Engine: Type GP 116-14/5.5 24 V 5.0 kW -Dimensions: 320/200/H220mm -Weight: 36 kg

Condition: ready for operation (used), Berger Lahr VRDM 397/50 LWC SIG Positec 52525035600 stepper motor, serial number: 9735750 with encoder, used, in good condition, 100% functional, delivery as per photos. Dkjdpfxsw Ikbms Akher

Condition: ready for operation (used), Mitsubishi A6GPPE Programming Controller, 220 V, 50 Hz, used, 100% functional. Dsdpfx Asi Eb Icekhekr

Year of construction: 2002, condition: good (used), Heidenhain TNC 124 X-700 mm Y-500 mm Z-500 mm taper SK40 Spindle speeds 63-3150 rpm Dksdpeinukmefx Akhor Table 900 x 500 mm weight of machine 2500 kg machine checked before delivery spare-parts available

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Djdpowzvkhjfx Akhskr Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Year of construction: 2018, condition: excellent (used), Detection head 350 x 200 mm Useful height 145 mm Intralox belt 1350 x 300 mm Dkodpjtwq I Esfx Akher With ejection of defective products in closed container Year of construction 2018

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: Dsdpsq Nyuvefx Akhjkr - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Dsdpfsvlwqlex Akhekr Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.