Used Weipert W1400 for sale (22)

Condition: excellent (used), turning length: 5,500 mm, total height: 2,900 mm, total length: 9,000 mm, total width: 2,900 mm, overall weight: 32,000 kg, Make: WEIPERT Type: W1400 Control: R&D MTC3 DBC Turning Length: 5500mm Swing over bed Ø: 1400mm Swing over cross slide Ø:960mm Length: 9000mm Width: 2900mm Height: 2900mm Kodpfxswzhzlj Anwodn Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1984, The lathe has undergone a Retrofit 2025 and is in perfect condition. It has been geometrically overhauled. The bed has been reground, and all guides have been scraped. The headstock and tool post have been disassembled into their individual components, cleaned, and reassembled. Everything has been stripped of its old paint and repainted with a new powder coating. A measurement report is included. The machine weight is 4000 kg. The original documentation and extensive accessories are included. 1 pallet containing approximately 13 Multifix C holders with turning tools is available and is part of this listing! Kdedpfsyutluox Anwsn

Condition: used, Year of construction: 1960, turning diameter over bed 480 mm turning diameter over slide rest 260 mm turning length 1500 mm turning speeds 90 - 1120 U/min centre height 240 mm spindle bore 52 mm total power requirement 7,5 KW weight of the machine ca. 2,3 t dimensions of the machine ca. 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post Kdodpfx Ansy Umb Djwen - Steady rest - Machine lamp - Chip tray - Center point

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm spindle bore : 65 mm Spindle speed : 14 -1400 rpm Kjdpeu Rd H Isfx Anwodn Machine is in good condition .

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square Kdsdjullzhspfx Anwen 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: new, Year of construction: 2024, Working range Center distance 1000 mm Turning diameter over bed 356 mm Rotation Ø over support 220 mm Bed width 206 mm Travel paths X-axis travel 178 mm Z1-axis travel 92 mm Swivel range top slide ± 50° Main spindle Speed range, high 550 1/min - 3000 1/min Speed range, low 30 1/min - 550 1/min Kodeu Sklyspfx Anwedn Spindle holder Camlock D1-4 Spindle bore 38 mm Spindle cone 5 MK Feed rate Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Thread cutting Thread cutting, metric (37) 0.4-7 mm Thread cutting Whitworth (28) 4-56 TPI Tailstock Tailstock pinol diameter 45 mm Tailstock taper 3 MK Tailstock quill stroke 120 mm Tailstock cross adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Condition: used, Year of construction: 1953, You can find additional images, data, and detailed information in the PDF notes. Should you have any further questions or require more information, please do not hesitate to contact us at any time. We are at your disposal. Kdjdpex R Tnvefx Anwon

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm Kodpetqqx Aofx Anwsdn turning length 1500 mm centre height 240 mm centre distance 1500 mm spindle bore 42 mm spindle turning speed range 14 - 1400 U/min total power requirement kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Kdjdpfxew Ew D Ds Anwen Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Kjdpfx Aeu Rdr Rjnwodn Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, 26 spindle speeds from 4.5 to 1400 rpm - powered top slide - rapid traverse - 400 mm Forkardt chuck Kedpfx Aney D H Rwswsdn

Year of construction: 1967, condition: used, LatheFabr. Weipert Type W500 turning diameter 500 mm Turning length 1000 Kdjdpfeh Rwkljx Anwsn

Condition: used, functionality: fully functional, machine/vehicle number: 349 074, spindle bore: 83 mm, turning diameter over bed slide: 535 mm, center height: 270 mm, center width: 1,750 mm, quill stroke: 225 mm, total length: 3,500 mm, total width: 1,800 mm, total height: 1,800 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 14 rpm, overall weight: 4,300 kg, spindle mount: MK 5, Weipert lathe Kedpfx Ansyzw Hkewodn

Condition: ready for operation (used), functionality: fully functional, Accessories: Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. The machine is attractively priced and only suitable for simpler tasks. Swing diameter over bed: 430 mm Centre distance: 750 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Weight approx.: 2 t Kdjdpfxsyw Nc Ne Anwon

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Kjdpexn Ty Rofx Anwjdn Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: good (used), Weipert crankshaft grinding machine Weipert Kdjdjihfryjpfx Anwon Grinding bench Centering point: Röhm 110 H MK5 machine length: 4300 mm Financing through our bank is also possible. komplett-konzept.leasingo.de More grinding machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min Ksdpsf Hmn Aofx Anwjdn removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: new, Year of construction: 2025, Bandsaw Weipert G 5025 Blade size 2715 x 27 x 0.9 mm Blade tension mechanical (manual) Cutting speed 36, 72 m/min Arm descent adjustment stepless – via a hydraulic cylinder Vice height 765 mm Minimum material length in vice 100 mm Power supply 3-phase 400 V Total power Kodpfx Anjwuvaiowsdn S1 100%: 1.5; S6 40%: 2.1 kW Coolant pump motor power 0.025 kW Weight 370 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Kedpfx Aeb A Ikaenwsdn -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 7 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Kdedpsb A Rgdefx Anwjn -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 8 kg

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Kdjdey Avdwjpfx Anwen

Condition: ready for operation (used), for center height: 400 mm Kdedpfx Anoth Ryrewon clamping range diameter: 120 - 370 mm 4 quills with roller inserts for bed width: 400 mm Weight: 156kg Suitable for WEIPERT lathe, W 630 e