Used Weiss Uv200Sb for sale (437)

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Kjdsziiz Hopfx Ag Aodu 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Kedpfxoz Tzvvo Ag Aodu Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Kdedpfoz Adkvjx Ag Aou

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Kjdpfxoz Adk As Ag Aodu

Year of construction: 2003, condition: used, Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible. Kedpsz R A Rcjfx Ag Asdu

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 Kodjz E Rbdjpfx Ag Asdu For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used,

Condition: used, Year of construction: 2020, Coordinate grinding machine Hauser 3 SM, year of manufacture 1996 Kdodpfezc Eihsx Ag Aou Surface grinding machine Okamoto, year of manufacture 1996 Cylindrical grinding machine Weiss W11, year of manufacture 2009

Condition: new, WEISS 174282-014 spindle, dimensions see acceptance protocol, unused in opened original packaging, 100% functional, scope of delivery as per photos Kdsdpfsz Adk Nsx Ag Aou

Condition: used, Year of construction: 2014, grinding diameter 100 mm grinding length 400 mm centre height 100 mm z-axis 425 mm table speed -stepless- 0,05 - 5,00 m/min workpiece spindle head rotation speed 90 - 1.000 U / min. Kodpfx Agey Rah Ae Ajdu grinding head swivelling -2 - +30 Grad tailstock quill taper MT 3 grinding wheel speeds 1.800 / 2.000 U/min grinding motor 3,70 kW dimensions of grinding wheel 350 x 50 x 127 mm total power requirement 7,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Temperature range: -40°C to +180°C Humidity: 15% to 95% Kdjdpfx Agjzn U A Ts Aju Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!

Condition: excellent (used), functionality: fully functional, 1. Mawera PS silo discharge system, in very good condition. 2. Weiss silo discharge system with chain. Year of manufacture: 1989, very robust design. Already dismantled. Arm length: 3 m. Motor: 5 kW. 3. Mawera SST hydraulic silo discharge system with 2 push rods, length: 14.5 m / piece. With hydraulic cylinders, unit, documentation, etc. The Mawera SST two-beam, hydraulically operated discharge system is used for the uniform and continuous discharge of wood chips from a rectangular silo. The slides or shovels move the material in alternating strokes to feed the boiler. Silo length: • Design with 12 slides: 14.50 m Internal width of the silo: 4.24 m Shovel blade width: 900 mm, shovel depth: 250 mm, shovel height: 70 mm Kedpfxezv Eias Ag Aedu 4. Mawera RSS spring arm silo discharge system: Design: Rotating silo discharge system with spring arms. Application area: Discharge of wood chips, wood shavings, sawdust, and biomass fuels. The rotating arms located on the silo floor convey the fuel to the central discharge point. Outlet: Central discharge opening / transition to a further conveying system.

Condition: used, Weiss Type: WT 5.1'/ Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Channel connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 phases + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Kdjdpfx Agozd Slks Aou Weight: approx. 2500 kg Type: WT 5.1'/ Condition: used Sale from current location Scope of delivery: (Only the Weiss emissions test chamber WT 5.1' + Mini-SHED) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2002, Power 18.5kw Kedpfx Ajz Ihw Ueg Aedu Rotor 600mm Opening 100cm/100cm Hours : 2677 380V

Condition: new, WEISS 5.5AZK 71L-4T B14P105 motor, serial number: 303194, unused, 100% functional, scope of delivery as per photos. Kdedpoy Sdu Asfx Ag Aou

Condition: used, External dimensions (L x W x H) 3,000 x 850 mm x 1,970 mm, Internal dimensions (L x W x H) 1,990 x 750 mm x 1,400 mm, Usable area 1.5 m², Growth height 1.4 m, Temperature range from approximately 5°C to +45°C, Adjustable humidity from 40% to 95%, 2 units in stock. Ksdpfx Agoz Eup Ej Ajdu

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Kdsdpfxszii Ako Ag Aju Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Kodpfxezil T Ej Ag Aodu Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Kdodpfx Aezzzpgjg Aju Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Kodpfxjzachcj Ag Aodu Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without… approx. 1820 mm, with… approx. 1915 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. circuit breaker rating: 35 A (32 A CEE plug) Kdodpfozp D Axjx Ag Aou Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Kdjdpfxozp D Die Ag Aju We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Testing Chamber, Air-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Kjdjzp D A Espfx Ag Aedu Hot/cold chamber changeover time: 10 seconds Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 … max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade: water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Kdjdpfxszh D Rme Ag Aeu Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: SWT 1000 – IPX9K Weiss spray and splash water testing chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standard-compliant testing of the water protection classes of housings or components. With optional equipment, testing according to IPX9K (high-pressure/jet water), ISO 20653, and other standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to the following standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, Ksdpfozil T Sex Ag Asdu MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible protection classes & tests The SWT system can cover a wide range of tests (depending on the equipment): Basic configuration: IPX3 / IPX4 tests (spraying or all-round splashing water). Optionally: Higher protection classes up to IPX5 / IPX6 (jet water), and – with appropriate high-pressure equipment – up to IPX9 or IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection classes) or ISO 20653 (e.g., for vehicle or outdoor applications) – depending on the target and area of application. Typical applications Some typical application scenarios for such a test chamber: Electronic devices or housings that are to be used outdoors or in humid environments, e.g., outdoor lighting, control cabinets, units, panels. Components for vehicles or machines, especially if they are exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). Batteries or electrical components that need to be tested for water protection – e.g., in the automotive industry or in e-mobility. Technical data: Suitable protection classes: IPX3 / IPX4 Swivel arm radius (for IPX3/4 tests): standard 200 mm (for SWT 1000) – optionally up to 400 mm. Test chamber (interior) Internal dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W x H x D) Operation / Control: Web panel or GUI for programming and controlling the tests. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.