Used Wellflex Compensator Dn250 for sale (1,023)

Condition: excellent (used), Compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Wellflex, compensator unused -Type: PN 2.5 DN 250 -Nominal diameter: DN 250 Ø 273 mm / length 285 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 4x dampers available Njdpfx Asip Rcysitedc -Price: per piece -Dimensions: Ø 375 x 280 mm -Weight: 18.1 kg/piece

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration Ndodpfx Aisz Diq Ustoc -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.

Condition: used, Year of construction: 2005, Rear-mounted mower / Working width 3.60m / Hydraulic lift and tilt / Hydraulic turning at headlands / Drive: 1000 rpm / 8-disc mower / Swinging compensation / Requires 2x double-acting control valves / Hydraulic pressure adjustment for the support rollers / Rear protective flap with protective covers that can be folded down. Nodpfxs Afka Ho Aitsdc

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MMFE 422132/35, Müller Martini 3631 CB-16, manufactured in 2001, compensating collator and stacker designed for the automatic stacking of bound books and printed materials. Maximum size: 450 x 340 mm (varies by model version, up to 470 x 320 mm) Minimum size: 140 x 100 mm Product thickness: 3–70 mm Maximum speed: Up to 18,000 pieces per hour The machine is currently in production. The CPU battery needs to be replaced. After purchase, the machine will be dismantled and packed for delivery. The machine will be taken out of production in early 2027. Ndodsz Dftfspfx Aitsc Do not hesitate to contact us for more information.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Quaser MV 154 PL, Year of manufacture: 2008, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1000/530/560 mm, Tool changer: 30-position, SK 40, Air blow-through spindle, Nods Aawnyjpfx Aitodc Internal cooling system (IKZ): 20 bar, Chip conveyor, 3D measuring probe, Thermal compensation, Temperature-controlled oil cooling system, Spindle replaced in 2021.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / coordinate drilling machine / jig boring machine (Made in Bienne/Biel, Switzerland). Excellent condition! Machine available online for only 3 more weeks (until November 16, 2026). The offer has been updated with even more accessories! Tool package with a value of approximately 12,500 EUR. A unique opportunity for connoisseurs of these machines at a special price. Hauser coordinate drilling machines in this condition are now mostly only available from specialized dealers in Switzerland, but at considerably higher prices, up to three times my asking price. Please compare for yourself! Due to the many inquiries: please only contact us if you are a serious buyer with a genuine intention to purchase; installment payments will not be accepted! As long as the advertisement is online, the machine is still available. An inspection while the machine is powered on is expressly possible. Nsdpfx Aszuvwleitsdc To be sold only to appreciative owners, such as watchmakers, precision engineering workshops, or testing workshops/prototype construction facilities, not to profit-oriented dealers. The coordinate drilling machine was with its first owner for 41 years and features the rare option of a motorized table drive/rapid traverse in the X and Y axes, as well as potentiometers. The stepless feed in the X-axis also allows for light milling and surfacing operations. This eliminates the tedious manual cranking required in all other Hauser coordinate drilling machines. The machine features thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which are switched on separately before starting work to maintain high accuracy and dimensional precision. This explains the factory-specified high positioning accuracy of 0.002 mm. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again in this form. These machines are primarily used in the watch industry, gunsmithing, precision engineering, material testing, and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Dimensions machine: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine will be made, as is customary for used machines, in full before loading, no partial or installment payments! I prefer the machine to be picked up by the buyer via a shipping company or in their own truck. Loading onto a truck is free for the buyer. Shipping (direct transport without transshipment) within the EU is still

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Nsdpfez Nll Hex Aitedc Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 2,150 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 500 mm, controller manufacturer: FAGOR, overall weight: 12,000 kg, total width: 7,770 mm, spindle motor power: 15,000 W, product length (max.): 3,130 mm, table load: 1,500 kg, number of axes: 3, This 3-axis GER SE 200-75 was manufactured in 2001. It features a maximum grinding dimension of 2000 × 800 mm and an impressive X-axis travel of 2150 mm. The machine is equipped with FAGOR servo motors and a powerful 15 kW grinding wheel motor. If you are looking to get high-quality grinding capabilities, consider the GER SE 200-75 surface grinding machine we have for sale. Contact us for further details. • Automatic cycles: Cycle-Based Programming • Type of drive: Servo Motors • Closure: Full EnclosureTable • Outer length: 2000 mm • Outer width: 750 mm • Max distance between vertical spindle and table: 700 mmExtra Information • Maximum Grinding Dimensions: 2000 × 800 mm • Maximum Grinding Height: 450 mm Njdpfx Aio Afhxmotedc • Grinding Wheel Dimensions: Ø400 × 75 × Ø127 mm • Automatic Wheel Balancer • Grinding Wheel Speed Control: Variable Speed Drive • Hydraulic Table-Mounted Wheel Dresser: Yes • Automatic Vertical Feed: Yes • Automatic Wheel Dressing with Compensation: Yes • Coolant Filtration System: Decanting Filter

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,135 kg, maximum load weight: 8,665 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 910 mm, total length: 8,350 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individual to customer specification. Nodpfx Aij Afn T Dstsdc #Fine-grain steel welded construction - Outer frame slightly angled with "Load-Lock-Profil" for strap hooking - Geared landing leg at front - Folding rear supports - 2 wheel chocks with holder - Rear underrun protection, galvanised steel - Rear mudflaps across full width - Quarter-shell mudguards to EC - with anti-spray mudflaps to EC - 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable - Open storage compartment for stakes, below the loading platform - 4 transverse lashing/stake rails recessed in the floor across full width up to the outer frame (max. usable inner width between outer stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing top to bottom approx. 60 mm (of the round steel). Closed at bottom by angle plate, half open downwards. For lashing and inserting stakes 80 x 80 mm. - 4 pairs of stake pockets recessed in the outer frame, 83 x 83 mm internal - 4 stake pockets recessed centrally in the floor, reinforced to the main frame, 83 x 83 mm internal - 6 pairs of plug-in stakes W=80/ D=80/ L=2000 mm, hot-dip galvanised - Note: stake pockets / plug-in stakes are not designed as sole load securing for long goods, pipes etc. without wrap-around lashing - Side underrun protection, aluminium #Drawbar – tandem trailer - Drawbar with certified 40 mm drawbar eye - Drawbar mechanically adjustable by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm #Axles + suspension - Axles at manufacturer's choice, with taper roller bearings and S-cam brakes - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load compensation (rocker compensation) #Wheels and tyres - 235 / 75 R 17.5" at manufacturer's choice - Steel rims, factory silver #Braking system - Dual-line air brake system - Spring brake parking brake - Air tank integrated in the frame - 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle - ABS and ALB, with ABS connector at front, with connecting cable - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! #Electrics - 24 volt, LED multi-chamber lamps, yellow LED side lighting, LED number plate lighting (note: false diagnostics may occur with certain towing vehicles although the function is given) - 2 white LED front position lights - 2 white/red LED outline marker lights at rear - 2 x 7-pin non-interchangeable connectors at front, with connecting cable #Floor - Film-faced plywood approx. 30 mm thick, for high point loads - Note: floor warping possible due to weather conditions! - Platform length approx. 6 200 mm #Operating notes - Special permit required if total combination length exceeds 18 750 mm. Observe country-specific registration regulations. #Registration / plates - Country of registration: Germany - with Dekra inspection and expert report - Contour marking with reflective tape to ECE R 048, white at sides and red at rear

Condition: excellent (used), functionality: fully functional, Vollmer circular saw sharpening machine, completely overhauled in 2015. For circular saws with a diameter of up to 1250 mm. Switchable for alternating or straight grinding. Grinding wheel: 200 mm. 2 built-in, switchable tooth profiles. 3 switchable feed speeds. Nsdpfx Aie Afhixetedc Automatic, adjustable compensation of the grinding wheel. Automatic sequence during sharpening. After the leveling operations, the machine switches off automatically.

Condition: good (used), Year of construction: 2013, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, Exo-Zell-EROWA automation with EDM314MF30+HSC600/5 Automation kit EROWA UPC table clamping system with adapter plate ITS/Powerchuck 10 pallet changing stations 150 electrode changing stations JMS-Certa identification Measuring machine DuraMAX EDM314MF30, year of manufacture 2013 Technical data: Travel ranges XxYxZ 905x705x455mm Workpiece table: 1150x850mm Tank size 1200x900mm Filling height of the work tank 500mm Distance table/electrode holder 250/700mm Workpiece weight max. 3000kg Dimensions WxDxH 2090x3416x3100mm Machine weight 7500kg Operating hours 10,000h Control interface MF30 Backflushing filter with dirt container Integrated cooling unit Automatic tank refill Extinguishing system Co² Smoke extraction Fire protection flap Erosion generator exopuls+60A C-axis 100°/min with holding brake, direct measurement Direct measuring system in all axes HSC600/5, 5-axis, year of manufacture 2008 Control iTNC530i Milling spindle HVC140, 42000rpm Technical data: Travel range XxYxZ 650x550x400mm Travel range BxC B105+/- C endless Table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 200kg Rapid traverse 50m/min Rotational speed B/C 80/80°/min HSK40-E 60-position tool changer Oil mist extraction Minimum quantity lubrication Manual control panel with handwheel Adjustable air/cooling supply Kinematics optimization Calibration sphere for kinematics optimization Length compensation for all axes HIB cooling unit Ndodpfx Aoz Sp Haoitoc Measuring probe Renisaw OMP400 Calibration ring Performance acceptance test Transport Commissioning on site Training

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation If you have any questions or require further information, please send us a message or contact us by phone. Nodpfs Adgrpox Aitjdc

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles Ndsdpfx As Adz Ileitec • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Additional equipment • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Njde Aa Ai Aopfx Aitsdc Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos Ndodpsz Sx Dbofx Aitec ##### PLEASE CALL – NO EMAILS! #####

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate control system Year of manufacture: 2016 Travel distances: X 450, Y 600, Z 330 Speed range: 20 – 18,000 rpm, stepless (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Internal coolant supply (IKZ 80 bar) Chip conveyor on the left Coolant system Compressed air nozzle at the spindle center Ndjdpfxe Ad Uh Ss Aitsc Bed flushing Automatic cabin door, automatic cabin roof Polycarbonate safety screens Rotating clear window (Rotoclear) Compressed air for measuring probes Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement Oil mist extraction 4 adjustable machine feet Operating manuals

Condition: used, Year of construction: 2012, -ISOBUS control system -Maximum output approximately 8,800 liters/min. total -Stone trap -Quick-release coupling, NW 200 Perrot type -Quick-release mechanism with parking device -Hydraulic drawbar suspension -Lift axle Njdpfx As Aflz Sjitedc -Forced steering, electrically controlled -Tire pressure control system -Hydraulically actuated forced steering, acting on the first and third axles -Air-suspended -Heart-shaped polyester tank, 27,000 liters, with 4 baffle plates -Vertical load: 3,000 kg -Steel frame, hot-dip galvanized inside and out -Display of fill level and axle position -Additional valve, electromagnetically controlled Trailing hose boom SwingMax 27m -TeleShift at the rear -2x ExaCut with hydraulic drive -Top-Drop-Stop, prevents dripping from the hoses -TopSwing 180° -Hydraulic folding at the front -Active slope compensation and pivoting function -Four-point hitch PUMP: -Vogelsang VX184Q rotary lobe pump with HiFlo pistons -Quick service access from the rear -Sealing chamber with pressurized oil filling -Output: 4300 liters at 600 rpm; pressure up to 8 bar permissible TANK: -Heart-shaped polyester tank, 27,000 liters, with 4 baffle plates -Angled support -Large wheel arches -Tridem unit with air suspension, first and third axles with trailing steering The cutter and pump were overhauled in 2025. Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale are reserved. All information without guarantee.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Number of T-slots: 7 Size of T-slots: 22 H12 mm Ndedpfxez Tugbe Aitec Reference slot: 22 H7 mm T-slot spacing: 140 mm 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: good (used), Year of construction: 2009, The FERAG MultiStack is a compensating stacker which is used at the end of an inserting line for depositing printed products. Ndsdpfxetk S Ecj Aitec

Year of construction: 2005, condition: good (used), Schrack 300 kvar Reactive power compensation equipment Manufacturer: Schrack Energietechnik Type: KRSMO-P-TS-25/12 Fi 7% Nominal power: 300 kvar Rated voltage: 400 V Ndsdpfxjk D Dxbe Aitsc Nominal frequency: 50 Hz Rated current: 432 A Reactive power control relay: Frako RM9612 Rittal electrical switch cabinet: Freestanding with built-in fan. Manufacturer: Rittal Type: TS8806 Dimensions: 610x830x2000 mm

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate path control Year of manufacture: 2014 Travel ranges: X 450 Y 600 Z 330 Speed range: 20 – 18,000 rpm, infinitely variable (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Nedpfx Aio Ad Uppstodc Internal coolant supply (IKZ 80 bar) Chip conveyor, left-hand side Coolant system Machine bed flushing Automatic cabinet door, automatic cabinet roof Polycarbonate safety screens Rotating clear window (Rotoclear) Compressed air for limit switches Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement system Oil mist extraction 4 adjustable machine feet Operating manuals

Condition: used, Year of construction: 1996, Tires: 520/70 R38, PTO shaft, drawbar with top linkage, drawbar, hydraulic folding mechanism for the toolbar, 7 partial widths, hillside compensation, working width 24 meters, injection boom. Ndedpez Sa Upjfx Aitec

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Ndjdpoz Smkqefx Aitsc Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Year of construction: 2026, condition: used, General information Year of manufacture: 2026 Field of application: Freight transport Technical information Power: 220 kW (299 HP) Type of fuel: Diesel Transmission: Automatic GVW: 13.970 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Production country: DE Ndodpfx Aszzbu Njitoc Additional information Please contact Christian Theißen for more information Manufacturer: Magirus Model: M32L-AS SC Year of build: 2026 Condition: New Data: Fuel type: Diesel Gear type: Automatic Engine power: 220 kW Max. working height: 32,00 m Max. platform height: 30,10 m Total permissible weight: 15.700 kg Empty weight: 13.970 kg Dimensions LxWxH: 10,15 x 2,5 x 3,29 m Colour: red Supports: Magirus VARIO support system. Level differences of up to 700 mm can be compensated for. Support width: (in front) min. 2,62 m / max. 5,42 m / (rear) min. 2,52 m / max. 5,37 m Number of axles: 2 Seats: 3 (1 Driver and 2 passenger seats) Lighting: Ambient lighting (LED version), equipment room lighting (LED strip), 2x LED spotlights on the basket and main control panel, 2 high-performance LEDs in the basket base and on the side of the basket (shining forward) Ladder set: 4-piece set, with articulated arm Max. basket load: 500 kg / 5 person Equipment: Reversing camera, color display in the driver's cab and at the outrigger control stations, ABA (Analog Load Display) on the ladder set, automatic ladder set retraction, ARF (Automatic Return Function), TMS (Target Memory System), VRS (Vertical Rescue System) Special features: Signaling system with rotating beacon and air compressor horn (Martin type), main control station with display, aluminum safety platform with 6 equipment compartments with roller shutters for various equipment, two anchor points for PPE, 360°/continuously rotatable stretcher bracket with option to attach to the basket floor, CAN bus control, 230V power supply, all-wheel braking system Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2001, Tires: 460/85 R38, top link hitch, PTO shaft, injector boom, air brake, bank steering, hydraulic support leg, 27m boom, single nozzle bar, hydraulic slope compensation, adjustable axle. Ndsdez Sckgjpfx Aitjc