Used Wema Joker 7000 Cd for sale (5,759)

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. Nsdozfwm Nopfx Aa Rsda A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Nedpfx Aoy Rnpusa Rjda Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to 10 m. Ndodpfx Aaszcgtbo Roa

Condition: excellent (used), Year of construction: 1989, operating hours: 7,384 h, functionality: fully functional, total width: 1,000 mm, total length: 5,500 mm, total height: 1,650 mm, This machine is designed for the production of wooden posts and stakes with a diameter of 40-140 mm. The length of the processed material is 1.2-6 m. The processing speed is 5-25 m/min. The first milling head has a diameter of 160 mm, and the second has a diameter of 140 mm. The material is clamped pneumatically. Njdpfx Aaozcd Ags Rjda

Condition: new, Year of construction: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing specifications for a wide range of woodworking machinery. Some parts are available directly from stock. Below are some particularly frequently requested parts: Ndedpfx Aaswagxms Roa Centering rollers bore 40mm €112.00/each Centering rollers bore 50mm €156.00/each Feed roller bore 40mm €118.00/each Feed roller bore 50mm €138.00/each Exit roller bore 40mm €102.00/each Feed roller bore 50mm €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to prepare a quotation including commercial terms; further spare parts available on request.

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Nsdpfx Aaeg Rn Avj Reda Send us your inquiry today!

Condition: used, functionality: fully functional, Year of construction: 2023, KRPAN GP 12 DF timber trailer with CD 7.4 K crane – professional forestry equipment For sale is a high-quality KRPAN GP 12 DF timber trailer, including a CD 7.4 K forestry crane. This combination offers high load-bearing capacity, a large reach, and a robust design for professional forestry applications. Technical data of the timber trailer: Manufacturer: KRPAN Model: GP 12 DF Permissible total weight: 12,000 kg Tare weight: 2,100 kg Loading platform length: 3,975 mm Loading platform length with extension: 4,755 mm Tires: 400/60-15.5 Hydraulic brakes on all 4 wheels Ndodpfx Aaezi Rk Aj Rea Foldable LED lighting Fixed drawbar eye Ø 40 mm Technical data of the CD 7.4 K crane: Maximum reach: 7.4 m (8.0 m with open grab) Net lifting moment: 63 kNm Gross lifting moment: 80 kNm Lifting capacity at 4 m reach: 1,860 kg Lifting capacity at maximum reach: 850 kg Slewing moment: 22 kNm Slewing range: 380°

Condition: used, Year of construction: 2013, grinding diameter 300 mm grinding depth 300 mm Travel distance - Z1 470 mm Travel distance - X1 200 mm Tilt angle - B2 1/1000 ° power capacity 3,5 kW Travel distance - Z2 470 mm Travel distance - X2 325 mm Drive power – External grinding spindles 16,5 kW 120 mm grinding diameter - cylindrical 400 mm sanding belt length 400 mm grinding wheel size Ø 500 x 50 x Ø 127 mm Travel distance - U 470 mm Tilt angle – B1 with longitudinal adjustment -1/+12 ° Tilt angle - B1 with workpiece spindle unit -20/+30 ° Manual longitudinal adjustment of the workpiece sp 470 mm Drive power – workpiece spindle 3,8 kW turning speeds 1-895 U/min Load capacity - Spindle head 200 kg Centre height above the swing bridge 200 mm total power requirement 47 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,54 x 2,83 x 2,3 m Accessories / Equipment: - Pneumatic dressing wheel that extends into the working area (mounted behind the workpiece spindle) - Coolant system with paper belt filter - Central lubrication - Spindle cooling Ndedszfqiwspfx Aa Rsa - Documentation

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Nedpfx Ajwt Abwja Rsda Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles Njdpfx Aajy Ilvge Rjda • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Ndjdpezdlrqsfx Aa Roa

Condition: used, Wema Probst profile milling machine Ndodpfjc N N U Njx Aa Roa Main motor: 11 kW Disassembled and ready for loading.

Condition: used, Technical details: Ndodpfx Aaeu Idvwj Roa number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Ndsdpfxou Idxfj Aa Rea Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW Nsdpfx Aeu Idv Dea Rjda weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor Ndedpfx Aaeu Idxrs Rja - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier Nodjyzaamspfx Aa Reda YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: excellent (used), Year of construction: 2011, 1. Nsdpfx Asign Iwsa Reda For sale: functional GAS BURNER G70, 7000 kW, with control cabinet and control unit, gas line DUNGS DN 80. WEISHAUPT Type: G70/1-B Design: ZM-LN Output: 700-7000 kW Year of manufacture: 2011 - Delivery possible upon request - All technical data can be seen in the pictures Preferably sold to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors.

Condition: not inspected (used), Combined shearing and bending machine, bending length 6000 mm Ndodpfx Ajy Rfpfoa Rsa

Condition: used, Year of construction: 2009, grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm control Siemens Sinumerik 840 D internal grinding depth max. 800 mm External grinding length max. 600 mm turning speed range - stepless 1-795 U/min workpiece length max. 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Setup speed (tapping): 10 rpm Njdpswp S Tnofx Aa Roda - Spindle head size A 8 according to DIN 55026 - Through bore 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (clamped in flight) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Mounting bore grinding block (diameter): 100 mm / 125 mm - Mounting length grinding block: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm External and surface grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of external grinding spindles: 7.5 kW - Mounting bore of grinding block: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges/grinding wheel holders - Various clamping jaws - Coolant system - Oil mist filter - Cooler - Technical documentation

Year of construction: 1984, condition: used, Corner connector, MachinePressta 7000, type PV 7. Ndodei Dx A Eepfx Aa Rsa

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration. Ndedpfx Aajwqdc Rs Rsa

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Njdpfx Aaswqf S He Rjda Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm Njdpfjubbrysx Aa Reda - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 053-497, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Machining Center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (Special Machine) Year of manufacture: 2005 Serial number: 053-497 CNC special machining center of type HPC FLEX-V100 from Werkzeugmaschinenfabrik Vogtland. The system is designed as a single-spindle machining module featuring both horizontal and vertical machining capabilities, and is equipped with an automatic pallet changer. It was specifically developed for processing rolling bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing for various machining positions and indexing angles. Using this 2-axis combination, a pallet with clamping fixture is swiveled from the loading position to the machining position. Loading is performed by an automatic pallet changer with a separate pallet infeed station. Direct loading within the machining area is not structurally provided. The system comes with extensive peripherals, including a coolant system with high-pressure unit, chip conveyor, hydraulic power unit, recooling system, centralized lubrication, as well as oil and emulsion mist extraction. The machine is controlled via Siemens SINUMERIK 840D. Used industrial special machine from a production environment. The system is fully assembled and equipped with comprehensive peripherals. Cosmetically in line with age and previous use, showing the usual wear in the working area. Inspection of the machine possible by appointment. Dismantling, loading, and transport to be carried out by the buyer. Machine Specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machining performance: approx. 1 workpiece/hour (depending on type) Machining Details • Workpieces: various rolling bearing cages • Material: CuZn40Pb2 • Operations: drilling, tapping, milling, facing, brushing Workpiece Clamping • Manufacturer: RAKO GmbH • Type: 12-jaw chuck • Operation: manual with power tool • Pallet size: 1250 × 1250 mm Controls and Drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Electrical Data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic System • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 • Tank capacity: 90 l • Maximum pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air requirement: approx. 300 m³/h Centralized Lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication cycle: every 10 min • Tank volume: 6 l Coolant System • Manufacturer: MANN + HUMMEL • Filtration unit: K90 L T63-PF750D-T-ND-SSP • Flow rate: 500 l/min at 4.4 bar (10 µm filter) High-Pressure Unit • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Flow rate: 50 l/min • Pump: ALLWEILER Chip Removal • Scraper belt conveyor with pump unit • Conveyor capacity: 550 l/min at 1.3 bar Extraction • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Recooling Unit • Manufacturer: BKW GmbH Nedpeyt I I Ujfx Aa Reda • Type: WRK30-2KK2P • Power: 8 kW Pallet Changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Type: F.M. 2667-0