Used Wemas - Makoson Wm 2 for sale (78,950)

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication Lodpfxsx Hkd Te Acfjaf - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: used, x-travel 600 mm y-travel 400 mm z-travel 320 mm table-size 900 x 420 mm control konventionell tool adaptor SK40 turning speed range 35,5 - 1800 U/min quill stroke ja mm total power requirement 5,0 kW weight of the machine ca. 1,45 t dimensions 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system Lajdexwzcxepfx Acfjf - Milling head with quill

Condition: excellent (used), Year of construction: 2010, power: 600 kW (815.77 HP), 1 burnt Weishaupt oil burner ----- Type : WM-L20 / 2-A Version : R Nox class : 2 Output : 600 - 2.100 kW Oil throughput : 50 - 176 kg/h Lsdsuugwcepfx Acfsaf Year of construction : 2010 with WFM 100

Condition: excellent (used), Year of construction: 2006, For sale are functioning and very well-maintained gas burners, brand Weishaupt: Weishaupt WM G30-1800kw, with gas manifold DUNGS DN65 Weishaupt WM G20-1600kw, with gas line Dungs DN65 1. Weishaupt WM G30/2-A - Output: 300 - 1800 kW - Connection pressure: 15 - 500 mbar - Design: ZM-LN - Year of manufacture: 2006 2. Weishaupt WM G20/2-A - Output: 250 - 1600 kW - Connection pressure: 15 - 500 mbar - Design: ZM-LN Lajdpfx Ajwgkpiscfsf - Year of manufacture: 2008

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,490 kg, axle configuration: 2 axles, first registration: 01/2010, Since 1972, your reliable partner for all matters concerning automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles, and construction machinery! We continuously offer you attractive financing options at special reduced rates. If you are interested, we are happy to prepare an individual offer for you! Trade-ins of your commercial vehicle or construction machinery are welcome. If you require a new TÜV inspection, we will gladly provide you with an offer from one of our partner workshops. Our offers generally do NOT include a new TÜV inspection unless otherwise specified. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. Lajdezq Iwijpfx Acfjf The information provided in advertisements, online, on price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or guarantee for typographical or data transmission errors. Listed features should be verified separately as needed. Subject to errors and prior sale.

Condition: like new (used), Year of construction: 2013, WESHAUPT gas burner, with gas line DUNGS DN65 Type: WM - G20/3-A Lsdpozbz Idefx Acfsaf Year of manufacture: 2013 Output: 350-2600 kW

Condition: excellent (used), Year of construction: 2018, operating hours: 4,020 h, functionality: fully functional, Make WM Model FC 780 IM2+ Year 2018 Hours approx 4038 Delivery Date Immediately Stations Forming, Cutting and (Down) Stacking Ledozam Hpepfx Acfsaf Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Lodpjw I Hzpjfx Acfjaf Loading by forklift possible. Assistance with transport organization available.

Condition: excellent (used), Weishaupt WM-L20/1a. 1400 kW. 118 kg/h. Year of manufacture: 2008. Lodpfx Acsig Tw Nefjaf

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Lsdpfoyupkysx Acfsaf Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: like new (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. Laedpfezab H Dsx Acfof WEISHAUPT WM - G20 (2600 kW) - Output: 350 - 2600 kW - Design: ZM - Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Lodpfx Aezaa Uascfjaf Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, simultaneous 5-axis version Lodpfor T S Nhex Acfeaf - SIEMENS 840 D SL control - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - HSK 63A tool holder - High pressure system IKZ 40 bar - Measuring probe 3D Weight 8,100 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 650 mm, controller model: HEIDENHAIN 530, table width: 710 mm, table length: 1,400 mm, overall weight: 12,000 kg, WEMAS VZ 1200 Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: WEMAS Model: VZ 1200 Control: HEIDENHAIN 530 Year of manufacture: 2008 Table size: 1400x710 mm Travel: X 1200, Y 750, Z 650 mm Max. workpiece weight: 1800 kg Spindle: HSK 63A 16,000 rpm Power S1/S2: 15kW/19kW Ljdpfxex Emm Uj Acfsaf Tool changer: 30 positions Workpiece probe: HEIDENHAIN Tool probe: HEIDENHAIN Chip conveyor Internal coolant supply (IKZ) The machine is in very good condition, serviced, and in continuous use.

Condition: used, mileage: 1,177,813 km, power: 290 kW (394.29 HP), first registration: 05/2018, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, trailer coupling, = Additional options and equipment = Lodpey N Tidefx Acfjaf - DVD - Air conditioning - Front refrigerator - Toilet - USB connections - Webasto heating system = Further information = Height: 370 cm Damage: None = Company information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, and offers a large parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price category in stock. We can find the right coach, school, or transit bus tailored to your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00 Mowimy po Polsku (Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Lsdpszu S U Hjfx Acfsaf Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: new, SKF T-1038929-4/2 / WM088127A/G grinding spindle, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Lsdpfx Aozu E Rzscfsaf

Condition: ready for operation (used), Year of construction: 2021, A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available. Ljdst Nhmnepfx Acfjaf

Condition: used, Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high-pressure filter with clogging indicator / filter unit with 2 filters -Type: O-28P-1-10Q-M2-98-C2C2-1-1 / 0-24P-1-40W-M-1-2 -Number: 6x filter unit available Lasdpfx Acomv T Hqefef -Price per unit -Dimension: 380/150/H250 mm -Weight: 20 kg/pc.

Condition: used, Hydraulic filter, filter element, high pressure filter Ljdsgnzyyjpfx Acfsaf -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Lsdpfx Asvgu D Sscfeaf Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, total width: 4,300 mm, spindle speed (max.): 24,000 rpm, total height: 4,789 mm, table load: 10,000 kg, overall weight: 30,000 kg, spindle motor power: 45,000 W, controller manufacturer: HEIDENHAIN, controller model: k25, product length (max.): 4,280 mm, number of axes: 3, This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details. • Table dimensions (X/Y): 2000 x 3000 mm • Rapid traverse (X/Y/Z): 40 / 40 / 20 m/min Laedpey Amd Ijfx Acfof • Power: 45 / 20 kW

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Model: WM 2000 Lajdpfx Acoyub Scjfof Machine serial no.: 9109330 Year of manufacture: 1991 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, table length 400 mm table width 400 mm table load 0,2 t table diameter 400 mm swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 100 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,065 t Ledpfjfv Azzjx Acfoaf dimensions of the machine ca. 0,56 x 0,42 x 0,46 m

Condition: new, Year of construction: 2023, functionality: fully functional, We are selling a new Weishaupt dual-fuel burner -mu Type WM-GL20/4-A with digital combustion manager WFM This unit was purchased as a backup but has never been used and is still in its original packaging. Version ZM-R-3LN (SuperLowNOx) Performance range (Natural Gas) 300 - 2450 kW Performance range (Heating Oil EL) 350 - 2450 kW Fully automatic operation for both oil and gas, either sliding/two-stage or modulating depending on the type of output control. Modulation range on the gas side up to 1:8 possible. Lasdoww Taxepfx Acfef Modulation range on the oil side up to 1:5 possible. Designed for burning EL heating oil according to DIN 51603 and natural gas as per DIN DVGW specifications, with the following components: - Burner housing - Blower with three-phase motor - Integrated speed control module for connection to a frequency converter (included) - Combustion air regulation with actuator - Fuel system consisting of a high-pressure gear pump with pressure control valve, solenoid valves as quick shut-off devices, nozzle assembly, and nozzle - Magnetic coupling for deactivating the oil pump during gas operation - Mixing device consisting of burner head and diffuser plate, continuously adjustable for optimal combustion results - Ignition system consisting of: high-voltage ignition transformer, ignition cable with plug connection, and ignition electrodes - Combustion manager for controlling all burner functions and power adjustment via electronic compound control - Suitable for continuous operation in accordance with TRD 411 and 412 - Flame monitoring by UV cell Digital Combustion Management: With the combustion managers W-FM 100 and W-FM 200*, operation of a combustion system becomes more convenient and secure. All key functions, such as fuel and air supply or flame monitoring, are recorded and controlled with digital precision. The aim is to optimize operating processes, maximize efficiency, and minimize emissions. Thanks to digital combustion management, such optimization can now be achieved with limited effort. Installation and maintenance are even significantly easier than with conventional technology. For example, a separate control panel for burner management is no longer necessary. Additionally, remote control, remote diagnostics, and external monitoring of the system are possible. This further increases safety and convenience for the operator.