Used Winch Nero X-85H - 1 Unit for sale (127,360)

Condition: new, The Nero X-85H is designed for use with tractors in categories I and II and requires an engine output of at least 59 kW (80 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 90 m of cable with a diameter of 13 mm, including end hooks. The winch can accommodate cables up to 120 m / Ø 12 mm or 100 m / Ø 13 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise control from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable infeed brake and speed control provide additional protection and controlled operation. The standard equipment also includes a tilt stop, a lower cable infeed roller, a hitch, and a chainsaw holder. With a shield width of 184 cm, a depth of 65 cm, and a height of 230 cm including the protective grille, the Nero X-85H is compact enough for use in confined forestry areas, but at the same time offers sufficient protection for the operator. - High pulling force: 8.5 t, braking force 106 kN Nljdpfj Abkmxjx Ab Rjh - Flexible cable capacity: 120 m / Ø 12 mm or 100 m / Ø 13 mm - Quick deployment: PTO shaft included in the scope of delivery, connection Cat. I & II - Efficient & safe: Speed adjustable - average cable speed 0.6 m/s - Practical operation: electro-hydraulic cable payout, manual control standard, remote control, emergency control - Additional safety: cable infeed brake - Standard equipment: tilt stop, lower cable infeed roller, hitch, chainsaw holder Manual control: yes Emergency control: yes Clutch discs: 4 Chainsaw holder: standard Product dimensions without protective grille: 175 × 184 × 65 cm Hitch: standard Product dimensions with protective grille: 230 × 184 × 65 cm Shield width: 184 cm Braking force: 106 kN Cable capacity up to: 120 m / Ø 12 mm or 100 m / Ø 13 mm Tractor output: from 59 kW (80 hp) Pulling force: 8.5 t Cable infeed brake: yes Lower cable infeed roller: standard Cable payout: electro-hydraulic Cable included: 90 m / Ø 13 mm Drive: PTO shaft Speed control: yes End hook: yes PTO shaft: included in the scope of delivery Average cable speed: 0.6 m/s 3-point linkage: Cat. I & II Tilt stop: yes

Condition: new, NERO X-55H Winch – Powerful forestry winch for professional timber extraction The NERO X-55H has been developed for demanding applications in forestry, agriculture, and timber extraction. Thanks to its robust construction, high pulling force, and modern control technology, this winch is ideal for the safe pulling and moving of logs, even under difficult operating conditions. The electro-hydraulic cable payout system enables comfortable and efficient operation. The standard radio remote control ensures precise control from a safe distance and increases comfort and operational safety in daily use. The sturdy design guarantees high load capacity and a long service life. Additional safety features such as a cable payout brake, speed regulation, and emergency operation support controlled work in the forest and on uneven terrain. The 3-point linkage allows for quick and secure mounting of the winch on the tractor. The standard equipment, including a chainsaw holder, drawbar, and protective guard, makes the X-55H a reliable piece of equipment for professional users. Nledj Abkmlepfx Ab Reh Powerful forestry winch for professional applications 5.5 t pulling force for efficient timber extraction Electro-hydraulic cable payout system Radio remote control for comfortable operation Robust and durable steel construction Cable payout brake for added safety Speed regulation for controlled operation 3-point linkage for quick tractor connection Includes drawbar and chainsaw holder Typical applications Forestry Timber extraction Agricultural operations Forest maintenance Firewood harvesting Professional forestry work Cable capacity up to: 110 m / Ø 10 mm or 90 m / Ø 11 mm Cable payout brake: yes End hook: yes Braking force: 69 kN Cable payout: electro-hydraulic Product dimensions with protective guard: 230 x 152 x 53 cm Emergency operation: yes Tilt stop: yes Product dimensions without protective guard: 152 x 152 x 53 cm Manual operation: yes Cable included: 70 m / Ø 11 mm Average cable speed: 0.6 m/s PTO shaft: included Speed regulation: yes Lower cable payout roller: standard Drawbar: standard Pulling force: 5.5 t Shield width: 152 cm Drive: PTO shaft Tractor power: 45–55 kW (60–75 hp) Clutch discs: 3 3-point linkage: Cat. I & II Chainsaw holder: standard

Condition: new, The Nero X-55M is designed for use with tractors in categories I and II and requires an engine power of 45–55 kW (60–75 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 11 mm, including end hooks. The winch can accommodate cables up to 110 m / Ø 10 mm or 90 m / Ø 11 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The mechanical cable payout and standard manual control allow for precise operation from a safe distance. With a shield width of 152 cm, a depth of 53 cm, and a height of 230 cm including the protective grid, the Nero X-55M is compact enough for use in confined forestry areas, but at the same time offers sufficient protection for the operator. As standard, the equipment includes a lower cable inlet roller, a towing device, and a chainsaw holder. - High pulling force: 5.5 t, braking force 69 kN - Flexible cable capacity: up to 110 m / Ø 10 mm or 90 m / Ø 11 mm - Quick deployment: PTO shaft included, connection cat. I & II - Efficient & safe: average cable speed 0.6 m/s - Practical operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 152 cm, depth 53 cm, height 230 cm incl. protective grid - Standard equipment: lower cable inlet roller, towing device, chainsaw holder Chainsaw holder: standard Towing device: standard Cable included: 70 m / Ø 11 mm Nlsdpfs Abkmfex Ab Rsh Average cable speed: 0.6 m/s 3-point linkage: Cat. I & II Manual control: standard Lower cable inlet roller: standard Tractor power: 45–55 kW (60–75 hp) Product dimensions without protective grid: 152 × 152 × 53 cm Clutch discs: 3 Braking force: 69 kN End hook: yes Product dimensions with protective grid: 230 × 152 × 53 cm Shield width: 152 cm Drive: PTO shaft Cable capacity up to: 110 m / Ø 10 mm or 90 m / Ø 11 mm Pulling force: 5.5 t Cable payout: mechanical PTO shaft: included

Condition: new, The Nero X-35M is designed for use with tractors in categories I and II and requires an engine power of 25–35 kW (34–48 hp). Thanks to the standard-equipped PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 9 mm, including end hook. The winch can accommodate cables up to 90 m / 9 mm or 75 m / 10 mm. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and the standard manual control allow for precise operation from a safe distance. With a shield width of 122 cm, a depth of 49 cm and a height of 210 cm including protective grille, the Nero X-35M is compact enough for use in confined forestry areas, but still offers sufficient protection for the operator. Standard equipment includes a lower cable inlet roller, towing hitch and chainsaw holder. - High tensile force: 3.5 t, braking force 44 kN - Flexible cable accommodation: up to 90 m / 9 mm or 75 m / 10 mm - Quick deployment: PTO shaft included, compatible with categories I & II Nlodpfx As Abkluob Roh - Efficient & safe: average cable speed 0.9 m/s - Practical operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 122 cm, depth 49 cm, height 210 cm incl. protective grille - Standard equipment: lower cable inlet roller, towing hitch, chainsaw holder Manual control: Standard Chainsaw holder: Standard Drive: PTO shaft Shield width: 122 cm Product dimensions with protective grille: 210 × 122 × 49 cm Braking force: 44 kN Cable included: 70 m / 9 mm Cable accommodation up to: 90 m / 9 mm or 75 m / 10 mm 3-point linkage: Cat. I & II Cable payout: mechanical Product dimensions without protective grille: 130 × 122 × 49 cm PTO shaft: included Tractor power: 25–35 kW (34–48 hp) End hook: yes Average cable speed: 0.9 m/s Towing hitch: Standard Tensile force: 3.5 t Clutch discs: 1 Lower cable inlet roller: Standard

Condition: new, The Nero X-45M is designed for use with tractors in categories I and II and requires an engine output of 35–43 kW (48–60 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 10 mm, including end hook. The winch can accommodate cables up to 110 m / 10 mm diameter or 90 m / 11 mm diameter. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and the standard manual control enable precise operation from a safe distance. With a shield width of 142 cm, a depth of 53 cm, and a height of 225 cm including the protective grid, the Nero X-45M is compact enough for use in tight forestry areas, but also offers sufficient protection for the operator. The standard equipment includes a lower cable inlet roller, a drawbar, and a chainsaw holder. - High pulling force: 4.5 t, braking force 56 kN - Flexible cable capacity: up to 110 m / 10 mm diameter or 90 m / 11 mm diameter - Quick deployment: PTO shaft included, compatible with categories I & II - Efficient & safe: average cable speed 0.9 m/s - Convenient operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 142 cm, depth 53 cm, height 225 cm including protective grid - Standard equipment: lower cable inlet roller, drawbar, chainsaw holder Nljdpj Abkl Ujfx Ab Reh End hook: yes Clutch plates: 1 Drawbar: standard Manual control: standard 3-point hitch: Cat. I & II Shield width: 142 cm Chainsaw holder: standard Cable included: 70 m / 10 mm diameter Product dimensions without protective grid: 142 × 142 × 53 cm Cable payout: mechanical Lower cable inlet roller: standard PTO shaft: included Drive: Power take-off Braking force: 56 kN Average cable speed: 0.9 m/s Maximum cable capacity: 110 m / 10 mm diameter or 90 m / 11 mm diameter Pulling force: 4.5 t Tractor power: 35–43 kW (48–60 hp) Product dimensions with protective grid: 225 × 142 × 53 cm

Condition: new, - Gasoline-powered winch - 4-stroke Honda GXH-50 engine, 50 cm³, 2.1 HP (1.6 kW) - with mounting hook and 60 mm x 2 m (2-3/8'' x 6') round sling - Quickly attached to trees, posts, stumps, or the trailer hitch - Easy to use: simply attach and pull - Continuous pulling force: 100% duty cycle compared to 20-40% for electric winches - No change in pulling force, unlike cable winches - Unlimited rope length; dimensionally stable, double-braided polyester Nedpj Adh Hzjfx Ab Rslh - Gearbox housing: aluminum alloy; gear ratio 110:1 HS code: 8425.39.00.90 Dry weight: 16 kg Max. pulling force with 85 mm drum: 635 kg (optional!) Max. pulling force with 57 mm drum: 1000 kg Idles: Yes Minimum/maximum rope diameter for pulling: 10mm/16mm Rope speed with fast-running drum 85m: 18 m/min Rope speed with standard drum 57mm: 12 m/min Rope to be used: dimensionally stable, double-braided polyester - unlimited rope length Weight: 16 kg Certification: CE certified Rated lifting capacity: Not designed for lifting operations Gearbox housing: Aluminum alloy Gear ratio: 110:1 Dimensions L x W x H: 37.1 x 36.6 x 36.6 cm Clutch: Not applicable - direct drive Engine: 4-stroke Honda GXH-50 cc Spool drum installed: 57 mm (2-1/4'') Rope speed with 57 mm drum: 12 m/min (40'/min) Duty cycle: Continuous Gearbox and gears: Gearbox housing made of aluminum alloy. Heat-treated 3-stage spur gears. Oil bath lubrication. Pulling force max.: 1000 kg Spool

Condition: new, Description The Portable Winch PCW4000-A is equipped with a powerful 4-stroke Honda GXH50 engine and offers a remarkable pulling force of 1,000 kg, which can be increased to up to 5,000 kg using a block and tackle. The centrifugal clutch ensures that the engine runs in idle while the drum stops when the pulling process is interrupted. This function enables safe positioning of the load by means of the rope brake. With the 76 mm drum and the innovative winch principle, there is no limit to the rope length. The accessory set includes nine parts for versatile applications. Included in the range: 1x PCW4000: Portable winch with Honda gasoline engine 1x PCA-1205M: Polyester rope 10 mm x 50 m, 2200 kg SWL 1x PCA-1360: "ROPEWIZER" high-performance thimble for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley 60 kN SWL, for 6-10 mm ropes 2x PCA-1276: Oval steel locking carabiner, 25 kN SWL 1x PCA-1281: Rope end hook with safety catch, 750 kg SWL 1x PCA-1260: Polyester sling 60 mm x 2 m, 2180 kg SWL 1x PCA-1350: Polyester round sling, 2.50 m Technical data of the Portable Winch PCW-4000: - Direct pulling force: 1,000 kg - Double pulling force: 2,000 kg - Weight: 12 kg Njdpfxj Adh Iro Ab Rjlh - Speed: 13.4 m/min - Engine: Honda GX50, 4-stroke, multi-position - Gearbox: Alloyed aluminum, heat-treated, 3-stage spur gear - Gear ratio: 200:1 - Clutch: Centrifugal - Brake: Automatic quick-release holding brake, roller bearing with backstop - Dimensions: 42 cm x 30 cm x 28.5 cm - Drum: Ø 76 mm - Recommended rope: Low-stretch double-braided polyester, length: unlimited, minimum diameter: 10 mm, maximum diameter: 12 mm

Condition: new, - Gasoline-powered winch/come-along - 4-stroke Honda GXH-50 engine, 50 cm³ - Includes mounting hook and 60mm x 2m (2-3/8'' x 6') round sling Nledpfe Adh Hbox Ab Rsh - With rope securing system - Quickly attached to trees, posts, stumps, or the trailer hitch - Easy to use: simply attach and pull - Continuous pulling force: 100% duty cycle compared to 20-40% for electric winches - No change in pulling force, unlike spool winches - Unlimited rope length, high-tensile, double-braided polyester - Gearbox housing: Aluminum alloy, gear ratio 110:1 Recommended rope: high-tensile, double-braided polyester - Unlimited rope length Rope speed with 57 mm drum: 12 m/min (40' /min) Duty cycle: Continuous Gearbox housing and gears: Gearbox housing made of aluminum alloy. Heat-treated 3-stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication Rope securing system: Yes (can be deactivated) Free spinning: No Snatch block (optional): 85 mm (3-3/8'') Rope speed with 85 mm drum: 18 m/min (60' /min) Rated lifting capacity with 85 mm drum: 175 kg (Optional!) Weight: 19 kg Snatch block installed: 57 mm (2-1/4'') Minimum / maximum rope diameter for pulling: 10mm / 16mm Gear ratio: 110:1 Clutch: Centrifugal clutch Maximum pulling capacity with 85 mm drum: 540 kg (Optional!) Engine: 4-stroke Honda GXH-50 cc Brake: Needle bearing with backstop Minimum / maximum rope diameter for lifting: 12mm / 13mm Maximum pulling capacity with 57 mm drum: 775

Condition: new, COMMERCIAL-GRADE, FOR PROFESSIONAL CABLE LAYERS BASE UNIT WITHOUT BATTERY & CHARGER! This cable laying machine can lay up to 600 meters of wire per hour. Its revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its tight turning radius, the PWM600MH-Li lays the cable right into the corners. Nsdpfxs Adipke Ab Rolh Its ergonomic, adjustable, and laterally pivoting multi-position handle allows the user to install the cable even under hedges, bushes, and low branches! The high level of operating comfort is complemented by the drive system, powered by a 1 kW electric motor for 80/82V lithium-ion batteries. The PWM600MH-Li cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the device using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawn robot does not have to worry about accidentally severing the cable. The easily replaceable, hardened steel blade cuts into any type of soil, whether normal, compacted, or stony. The glide foot reduces dirt deposits on the blade and gearbox shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH-Li, which is why it is the most efficient machine on the market! Motor: 1 kW electric motor for 80/82 volt lithium-ion batteries* Speed: Three speed levels up to 14 m/min Operating time with one 9Ah battery charge up to 30 min or up to approx. 420m Blade: Stable carbide blade for all soil types Close-to-edge working - possible down to 15 cm Incl. spacer, adjustable from 15 to 45 cm Laying depth: 4 – 6 cm Handle: Infinitely adjustable, laterally offset handle Cable: up to 6mm diameter, boundary wire from any lawn robot manufacturer can be mounted Wheels: Lug tires 4.10" x 10" Weight: 36 kg Dimensions: 56 cm x 46 cm x 125 cm (Packing dimensions: 62 cm x 62 cm x 48 cm – 39 kg) *This item is the base unit without batteries & without charger! If you would like a complete set incl. 82V/5 Ah battery & charger, please order the item "PWM600MH-LI-SET". Single 82V/5Ah battery: PCA-0207 Suitable quick charger: PCA-0231 Boundary wire not included! Optional accessories may be required for some cable spools/cassettes. Warranty: 1 year limited for commercial use 2 years for proven private purchase/use

Condition: new, New product! Available from July 2024 - Pre-order now! PCW4500 - 2-stroke gasoline-powered portable winch Equipped with the CER500W engine from Maruyama, a commercial 2-stroke engine for professional use, offering an impressive pulling force of 1,200 kg. The STRONGEST winch from Portable Winch! The very first model with a 2-stroke engine in the product line. The Maruyama engine, with its 5-year warranty, makes it the most reliable on the market. With an incredible direct pulling force of 1,200 kg (2,650 lb) and a maximum pulling force of up to 6,000 kg (13,250 lb) when using 2 double pulleys. Equipped with a unique stainless steel cable brake (progressive capture system) that holds the load in place, a centrifugal clutch ensures better control, a protective plate adjusts to the foot when starting, and the pull bar on the swivel hook prevents the cable from tangling. The PCW4500 was designed for professional users who want to be convinced by the easy operation and safety of the device. - 2-stroke commercial quality engine from Maruyama Japan - Centrifugal clutch and stainless steel cable brake - Fuel: the same gasoline-oil mixture as for a chainsaw (see manual for more details) - Drum size: 76 mm *Note: The cable brake of the PCW4500 cannot be installed on any other winch. The device was specially developed for this model to facilitate the starting of the 2-stroke engine and to integrate the throttle and clutch control, which is not possible with direct-drive winches. DIRECT PULLING FORCE 1,200 KG Nljdj Adh Ixspfx Ab Rsh DOUBLE PULLING FORCE (when using a block and tackle pulley) 2,400 KG WEIGHT 13 KG SPEED 12.2 m/min ENGINE MARUYAMA CER500W - 50cc, air-cooled 2-stroke gasoline engine, 360° tiltable GEARBOX Gearbox made of alloyed aluminum. Heat-treated 3-stage spur gear. Shafts with ball bearings. Oil bath lubrication GEAR RATIO 200:1 CLUTCH Type: Centrifugal clutch BRAKE Operation with: automatic quick-release retaining brake Roller bearing with backstop DIMENSIONS 43 cm x 33 cm x 29 cm DRUM Ø 76 mm CABLE RECOMMENDED Low-stretch double-braided polyester Length: Unlimited Minimum diameter: 10 mm Maximum diameter: 12 mm INCLUDED: Polyester sling 60 mm x 2.5 m

Condition: new, This model is powered by the new Honda GX50 4-stroke, 360° inclined engine. It also features a centrifugal clutch that engages when you pull the rope. When the rope is released, the drum stops rotating, and the ARM performs its function by holding the load in position! To release the rope from the mechanism, a simple lateral movement is all that's needed! This is a lightweight, powerful, safe, and very easy-to-use winch. Performance The PCW4000 develops a remarkable pulling force of 1000 kg without any mechanical advantage. When used with an additional pulley system, the pulling force can be increased up to five times (5x). With two double pulleys, you could pull up to 5000 kg! DIRECT PULLING FORCE 1,000 KG DOUBLE PULLING FORCE 2,000 KG WEIGHT 12 KG SPEED 13.4 m/min ENGINE Multi-position, four-stroke engine, Honda GX50 GEARBOX Gearbox made of alloyed aluminum. Heat-treated, 3-stage spur gear gearbox. Shafts with ball bearings. Oil bath lubrication. GEAR RATIO 200:1 CLUTCH Type: Centrifugal BRAKE Operation with: automatic quick-release holding brake Rolling bearing with backstop DIMENSIONS 42 cm x 30 cm x 28.5 cm DRUM Ø 76 mm ROPE RECOMMENDED Low-elongation double-braided polyester Length: Unlimited Minimum diameter: 10 mm Maximum diameter: 12 mm INCLUDED: Polyester sling 60 mm x 2 m Nsdpfo Adh Ilsx Ab Rolh

Condition: new, - Gasoline-powered winch - Reliable: powered by a Honda GX-35 cc 4-stroke engine - Lightweight: only 9.5 kg - with mounting hook and 1.83m x 50mm round sling - Quickly attached to trees, posts, stumps, or the trailer hitch - Easy to use: simply attach and pull - Unlimited rope length thanks to the capstan winch principle - constant pulling force Capstan drum installed: 76 mm (3'') Nljdpfx Abe Adh Hho Rsh Engine: 4-stroke, multi-position Honda GX-35 cc Rope speed with 76 mm drum: 8 m/min (26'/min) Dimensions L x W x H: 35 x 28.9 x 26.1 cm Idles: no Gearbox housing and gearbox: Gearbox housing made of aluminum alloy. Heat-treated 3-stage straight-tooth gears. Oil bath lubrication. Minimum/maximum rope diameter for pulling: 10mm / 12mm Optional capstan drum: - Gear ratio: 200:1 Nominal lifting capacity: Not designed for lifting operations Clutch: Not applicable - direct drive Maximum pulling force with 76 mm drum: 700 kg Brake: Roller bearing with anti-recoil mechanism Weight: 9.5 kg Rope to be used: dimensionally stable, double-braided polyester - unlimited rope length

Condition: new, The Nero X-65H is designed for use with tractors in categories I and II and requires an engine power of 55–65 kW (75–90 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 80 m of cable with a diameter of 12 mm, including end hooks. The winch can accommodate cables up to 120 m / 11 mm diameter or 100 m / 12 mm diameter. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise control from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable inlet brake and speed regulation provide additional protection and controlled operation. The standard equipment also includes a tilt stop, lower cable inlet roller, towing hitch, and chainsaw holder. With a shield width of 164 cm, a depth of 65 cm, and a height of 230 cm including the protective guard, the Nero X-65H is compact enough for use in tight forest areas, but at the same time offers sufficient protection for the operator. - High pulling force: 6.5 t, braking force 81 kN - Flexible cable accommodation: up to 120 m / 11 mm diameter or 100 m / 12 mm diameter - Quick deployment: PTO shaft included, connection Cat. I & II - Efficient & safe: speed adjustable – average cable speed 0.6 m/s, - Practical operation: electro-hydraulic cable payout, manual control standard, remote control, emergency control - Additional safety: cable inlet brake - Standard equipment: tilt stop, lower cable inlet roller, towing hitch, chainsaw holder Manual control: yes Average cable speed: 0.6 m/s Speed regulation: yes Lower cable inlet roller: standard PTO shaft: included Tilt stop: yes Product dimensions with protective guard: 230 × 164 × 65 cm Towing hitch: standard 3-point hitch: Cat. I & II End hook: yes Pulling force: 6.5 t Tractor power: 55-65 kW (75-90 hp) Braking force: 81 kN Product dimensions without protective guard: 175 × 164 × 65 cm Cable payout: electro-hydraulic Chainsaw holder: standard Clutch discs: 4 Cable included: 80 m / 12 mm diameter Emergency control: yes Drive: PTO shaft Shield width: 164 cm Nljdpfxj Abkmre Ab Rjh Cable accommodation possible up to: 120 m / 11 mm diameter or 100 m / 12 mm diameter Cable inlet brake: yes

Condition: new, COMMERCIAL APPLICATION, FOR PROFESSIONAL CABLE INSTALLERS The cable laying machine can lay up to 600 meters of wire per hour. Its revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its tight turning radius, the PWM600MH lays the cable even into corners. Its ergonomic, adjustable, and laterally pivoting multi-position handle allows the user to install the cable even under hedges, bushes, and low-hanging branches! The high level of operating comfort is complemented by the drive, powered by a 4-stroke engine from Honda. The PWM600MH cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the machine using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawnmower robot does not have to worry about the cable being accidentally cut. The easy-to-change, hardened steel blade cuts into any type of soil, whether normal, compacted or stony. The sliding foot reduces dirt deposits on the blade and gearbox shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH, which is why it is the most efficient machine on the market! New 2020 Model NEW: Multi-Position ANTI-VIBRATION HANDLE - Vibration reduced by 40% NEW: CHEVRON lug tires - improved traction in wet conditions Mount for all common cable drums Nlsdpfx Abs Adipdo Roh Hardened steel blade made of carbide steel, 6mm wide, can be used on both sides (PWMA-0008) Close-to-edge working - only 15 cm distance required Incl. spacer, adjustable from 15 to 45 cm Boundary cables up to 6 mm diameter Engine: HONDA GXH-50 2.1 HP – 4-stroke Speed: up to 15 m/min Laying depth: 4 – 6 cm Infinitely adjustable, laterally offset handle Cable: Install cables from any manufacturer of lawnmower robots Wheels: Lug tires 4.10" x 10" Weight: 34.1 kg Dimensions: 56 cm x 46 cm x 125 cm (Package dimensions: 62 cm x 62 cm x 48 cm, 39 kg) Incl. 1x special blade made of carbide steel (PWMA-0008) Warranty: 1 year limited Engine: Warranty terms from Honda International

Condition: new, Description The VP17 Vogesenblitz log splitter offers an impressive splitting force of 17 tons and is powered via the PTO shaft. It features a robust, quiet cast iron pump and complies with the safety standard EN 609-1. The simple two-hand operation, two splitting speeds, and a splitting length of 115 cm and cylinder stroke of 105 cm make it user-friendly. The standard, patented mechanical log lifter with automatic locking, as well as the all-steel base plate, ensure high stability. Other features include a piston quick return, an ergonomically shaped splitting wedge, an interchangeable splitting blade with a length of 265 mm, and a 9-way adjustable log clamp. The log splitter is suitable for three-point hitches of categories I and II and offers additional holders for an axe and hatchet. The powder-coated surface ensures long-lasting use. - 17 tons splitting force - PTO shaft drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter standard, with automatic locking - All-steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left-hand control lever with 9-way adjustable log clamp and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples Nledpfj Adlg Esx Ab Reh - Three-point hitch cat. I and II - Holder for axe & hatchet - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety - Cable diameter 6 mm (Overall height in transport position with winch ~213cm) Pump: Cast iron pump Speed 2 (cm/s): 27.9 Piston return (cm/s): 17.6 Splitting force (tons): 17 Speed 1 (cm/s): 11.8 Opening width (cm): 115 Dimensions (HxLxW cm) (*Working position - Transport position): 262-200 x 135 x 120 Pump capacity (L/min): 57 Drive: PTO shaft drive Container capacity (L): 28

Condition: new, COMPLETE STARTER SET WITH TWO BATTERIES AND CHARGER COMMERCIAL MODEL, FOR PROFESSIONAL CABLE LAYING The cable laying machine can lay up to 600 meters of wire per hour. The revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its narrow turning radius, the PWM600MH lays the cable right into the corners. Its ergonomic, adjustable, and laterally pivoting multi-position handlebar allows the user to install the cable even under hedges, shrubs, and low branches! The high level of operating comfort is complemented by the drive, powered by a 4-stroke engine from Honda. The PWM600MH cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the machine using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawn robot does not have to worry about the cable being accidentally cut. The easy-to-change, hardened steel blade cuts through any type of soil, whether normal, compacted, or stony. The sliding foot reduces dirt deposits on the blade and drive shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH, which is why it is the most efficient machine on the market! - Complete set incl. 2x 82V/5 Ah lithium-ion batteries (PCA-0203) and matching quick charger (PCA-0231) - Motor: 1 kW electric motor for 80/82 Volt lithium-ion batteries - Speed: Three speed levels up to 14 m/min - Running time with one 9Ah battery charge up to 30 min. or up to approx. 420 m - Blade: Sturdy carbide blade for all soil types - Laying depth: 4 – 6 cm - Handle: Infinitely adjustable, laterally offset handlebar Njdpfe Adipqsx Ab Relh - Cable: up to 6mm diameter, boundary wire from any manufacturer of lawn robots can be mounted - Wheels: Lug tires 4.10" x 10" - Weight: 36 kg - Dimensions: 56 cm x 46 cm x 125 cm (packing dimensions: 62 cm x 62 cm x 48 cm – 39 kg)

Condition: new, Description Nledo Adh I Sspfx Ab Rsh The Portable Winch PCW5000-A offers a robust design and high durability. Equipped with a powerful GXH50 four-stroke engine, it provides a constant pulling speed of 12 meters per minute and a pulling force of up to 1,000 kg. For faster operation, an optional drum with an 85 mm diameter is available, increasing the pulling speed to 18 meters per minute. The PCW5000 allows for pulling loads without power loss and can even handle up to 5,000 kg with a block and tackle system. It requires lead-free gasoline with 86 octane or higher and offers direct drive without a clutch. Included in the range: 1x PCW5000: Portable winch with Honda gasoline engine, max. pulling force 1000 kg 1x PCA-1215M: Polyester rope 12 mm x 50 m, 3300 kg MBS (Minimum Breaking Strength) 1x PCA-1360: "ROPEWIZER" high-performance fairlead for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1274: Stainless steel pulley 90 kN MBS, for 6-13 mm ropes 2x PCA-1276: Oval steel locking carabiner, MBS 25 kN 1x PCA-1281: Rope end hook with safety, MBS 750 kg 1x PCA-1260: Polyester sling 60 mm x 2 m, MBS 2180 kg 1x PCA-1350: Polyester round sling - 2.50 m

Condition: new, Description The VP17 Vogesenblitz wood splitter offers a splitting force of 17 tons and is powered by a PTO drive. It features a robust and quiet cast iron pump. The splitter complies with the safety standard EN 609-1 and has a simple two-hand operation. With two splitting speeds, a maximum splitting length of 115 cm, and a tool-free adjustable cylinder stroke of 105 cm, it can be used in a variety of applications. The hydraulic log lifter and the all-steel base plate with beveled edges provide additional functionality and stability. Other features include a quick piston return, an ergonomically shaped splitting wedge, an interchangeable splitting knife with a length of 265 mm, and a left-hand control lever with a 9-position adjustable gripping claw. The wood splitter is suitable for three-point hitches of categories I and II and offers holders for an axe and hatchet. The powder-coated surface ensures a long service life. - 17 tons splitting force - PTO drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustable - Incl. hydraulic log lifter - All-steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting knife length 265 mm - Interchangeable splitting knife - Left-hand control lever with 9-position adjustable gripping claw and gas spring (for wood lengths from 77 cm and from Ø 8 cm) - Brass guide with grease nipples - Three-point hitch cat. I and II - Holder for axe & hatchet - Powder coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Rope speed up to 0.5 m/s - Limit switch at the rope inlet - 20 m rope with rope hook and safety device - Rope Ø 6 mm (Total height in transport position with winch ~213 cm) Nljdpfx Aj Adlhiob Rjh Drive: PTO drive Dimensions (H x L x W cm) (*Working position - Transport position): 262-200* x 135 x 120 Pump: Cast iron pump Opening width (cm): 115 Pump capacity (L/min): 57 Speed 1 (cm/s): 11.8 Speed 2 (cm/s): 27.9 Tank capacity (L): 28 Piston return (cm/s): 17.6 Splitting force (tons): 17

Condition: new, The PCW 3000-P is the ideal solution for anyone who needs a powerful and compact winch that can be used in all positions. This special kit is designed to handle a wide range of tasks and is particularly appreciated for its robustness and versatility. Whether you need to pull large game out of the forest, move logs, free your ATV from tight spots, or retrieve your boat or dock from the water – the PCW 3000-P will not let you down! With its impressive pulling power and ease of use, this winch is perfect for all basic pulling tasks. Included in the set: 1x PCW3000: Gasoline-powered winch. Max. pulling capacity 750 kg. 1x PCA-1205M: 10 mm x 50 m polyester rope, 2200 kg MBS 1x PCA-1360: "ROPEWIZER" high-performance fairlead for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley, 60 kN MBS, for 6-10 mm ropes 2x PCA-1276: Oval steel shackle, 25 kN MBS 1x PCA-1281: Rope end hook with safety catch, 750 kg MBS Nsdo Adh Ifepfx Ab Rjlh 1x PCA-1260: Polyester sling 60 mm x 2 m, 2180 kg MBS 1x PCA-0102: Transport case for PCW3000 - FREE BONUS!

Condition: new, Description The VP16 Vogesenblitz is a powerful wood splitter with a splitting force of 16 tons, driven by a power take-off and a 45-liter pump. This compact splitter features a lowerable cylinder with a quick-release mechanism for a transport height of 1.90 m and is equipped with a three-point linkage of categories I and II. Safety is ensured by an easy-to-use 2-hand safety circuit. With two splitting speeds and a quick piston return, it offers efficient operation. The ergonomically designed splitting wedge with a splitting blade length of 245 mm is replaceable and provides additional safety according to EN609-1 thanks to the mechanical log lifter. Other features include a holder for an axe and hatchet, brass guides, a robust full-steel base plate, and a powder-coated surface. - 16 tons splitting force - Drive via power take-off, 45-liter pump - Compact splitter with lowerable cylinder (quick release) for a transport height of 1.90 m - Three-point linkage cat. I and II - Easy-to-use 2-hand safety circuit - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - According to EN609-1, including a mechanical log lifter - Holder for axe and hatchet - Brass guides - Full-steel base plate - Powder-coated Winch with remote control: - 20 m cable, Ø 6 mm - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to approx. 600 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor; including cable and plug - In case of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213cm) Speed 1 (cm/s): 10.6 Opening width (cm): 108 Speed 2 (cm/s): 27.8 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190* x 120 x 110 Container capacity (L): 28 Pump capacity (L/min): 54 Pump: Single Nedj Adlgrspfx Ab Rjlh Piston return (cm/s): 16 Splitting force (tons): 16 Drive: Power take-off drive

Condition: new, - 5.0 tons pulling force at the drum core - 3.0 tons pulling force of the uppermost rope layer - Mechanical rope pulling control with dead man's switch - Shield width 1,500 mm - Low own weight of 210 kg - Clean rope winding - Low rope inlet, height 1,250 mm - Includes rope 70 m/10 mm, highly compacted, with Flemish eye and swivel hook - Maximum rope capacity 100 m/10 mm - Rope inlet speed 40 m/min - For tractors from approx. 20 kW - No electro-hydraulic control possible Max. pulling force: 5.0 t Min. pulling force: 3.0 t For tractors from: 11 kW Rope capacity/diameter: 80 m/10 mm Height of the rope inlet roller: 1250 mm Shield width: 1500 mm Rope inlet speed: 40 m/min Nsds Adg R Sepfx Ab Rolh Weight: 210 kg

Condition: new, Description The VE17 Vogesenblitz log splitter offers an impressive splitting force of 17 tons and is powered by a 400 V/4.8 kW electric motor and a double pump. It complies with the safety standard EN 609-1 and features a simple two-hand operation system as well as two splitting speeds. With a maximum splitting length of 115 cm and a cylinder stroke of 105 cm that can be lowered without tools, it is extremely user-friendly. The patented mechanical log lifter with automatic locking is included as standard equipment. Other features include a robust, all-steel base plate, a rapid piston return, an ergonomically shaped splitting wedge, and an interchangeable splitting knife with a length of 265 mm. The left control lever offers a 9-position adjustable holding claw, and the brass guide is equipped with grease fittings. The log splitter has a three-point linkage of categories I and II, as well as holders for an axe and a hatchet, and is powder-coated for high durability. - 17 tons of splitting force - Powered by a 400 V/4.8 kW electric motor and a double pump - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter included as standard, with automatic locking - All-steel base plate with beveled edges - Rapid piston return - Ergonomically shaped splitting wedge - Splitting knife length 265 mm - Interchangeable splitting knife - Left control lever with 9-position adjustable holding claw and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease fittings - Three-point linkage cat. I and II - Holder for axe & hatchet - Powder-coated Hydraulic winch, mechanically controlled: Nljdpfxe Adktdj Ab Rjh - Pulling force 600 kg - Cable speed up to 0.5 m/s - 20 m cable with cable hook and safety - Cable diameter 6 mm (Overall height in transport position with winch ~213 cm) Container capacity (L): 28 Splitting force (tons): 17 Pump: Double Piston return (cm/s): 14.2 Pump output (L/min): 43 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200* x 135 x 120 Opening width (cm): 115 Drive: 400 V / 4.8 kW Speed 1 (cm/s): 9.5 Speed 2 (cm/s): 21.0

Condition: new, - 20 m cable; Ø 6 mm - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to 500 kg - Transmitter: with 3 AAA batteries; 1.5 Volt; 4 buttons (On / Off / Retract / Extend); 64 different frequencies; weight 120 g - Receiver: 12 Volt DC from the tractor; incl. cable and connector - In case of a power failure, the valve can also be operated manually - Incl. mounting bracket for mounting on H28 to models Nlsds Adkp Sspfx Ab Roh - When ordered together with an H28 to splitter, it will be delivered pre-assembled

Condition: new, Description The VPE16 Vogesenblitz log splitter offers a splitting force of 16 tons and is powered by both a PTO shaft and a 400 V/4.8 kW electric motor with a double pump. With its compact design and lowerable cylinder, it achieves a transport height of only 1.90 m and is suitable for the three-point linkage of categories I and II. The easy-to-use 2-hand safety control and two splitting speeds ensure user-friendliness, while the piston quick return and the ergonomically shaped splitting wedge increase efficiency. The replaceable splitting blade (245 mm) and the robust construction elements such as the all-steel base plate and brass guides complete the overall package. The log splitter complies with the safety standards according to EN609-1 and features a holder for a splitting maul and axe. - 16 tons splitting force - Combined drive via PTO shaft and electric motor 400 V / 4.8 kW with double pump - Compact splitter with lowerable cylinder (quick release) for transport height of 1.90 m - Three-point linkage cat. I and II - Easy-to-use 2-hand safety control - 2 splitting speeds - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, incl. mechanical log lifter - Holder for splitting maul & axe - Brass guides - All-steel base plate - Powder-coated Nlsdpfxj Adlaxo Ab Reh Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety - Cable diameter 6 mm (Overall height in transport position with winch ~213 cm) Container capacity (L): 28 Drive: PTO drive and electric motor 400 V Piston return (cm/s): 16 / 14.2 Speed 2 (cm/s): 27.8 / 20.9 Opening width (cm): 108 Splitting force (tons): 16 Pump capacity (L/min): 54 / 42 Pump: Single / Double Speed 1 (cm/s): 10.6 / 9.5 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110

Condition: new, Description The Vogesenblitz HPE28 horizontal log splitter offers an impressive splitting force of 28 tons and combines an electric motor (9.2 kW, 400 V) with a PTO drive for optimal performance. The easy-to-use 2-hand safety switch, the automatic speed control "AutoSpeed", and the rapid piston retraction guarantee user-friendly operation. A hydraulically adjustable splitting wedge, a hydraulic loading device, and a foldable log table facilitate handling. The splitter is robust and durable, and also equipped with a protective grid. In addition, the perfectly mounted wireless winch offers a pulling force of up to 600 kg and simple control via remote control. In the event of a power failure, the valve can be operated manually. Nlodpfx As Adg Nbeb Rsh Features: - 28 ton splitting force - Combined drive: Electric motor 400 V / 9.2 kW / 32 A with triple pump 87.8 l/min + PTO drive double pump 89 l/min - Easy-to-use 2-hand safety switch - Three-point linkage Cat. II - Automatic speed control "AutoSpeed" - Rapid piston retraction - Incl. hydraulically adjustable 2/4 splitting wedge, adjustment range 31 cm - Incl. hydraulic loading device (log lifter) - Incl. large, foldable log table with support feet - Incl. protective grid according to EN609-1 - Opening width 120 cm / cylinder stroke 120 cm - Cylinder diameter 125x80 mm - Brass guides with grease nipples - Ergonomic operating height - Robust and durable Wireless winch, pre-assembled: - 20 m cable; Ø 6 mm incl. cable hook - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to approx. 600 kg - Transmitter: with 3 AAA batteries; 1.5 Volt; 4 buttons (On / Off / In / Out); 64 different frequencies; weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pin plug - In the event of a power failure, the valve can also be switched manually. Pump: Double / Triple Splitting force (tons): 28 Drive: PTO drive + E-motor 400 V Automatic piston advance (cm/s): 24.0 / 22.7 Piston retraction (cm/s): 21.8 / 16.2 Dimensions (H x L x W cm): (Transport position): 182 x 178 x 240 / (Working position): 182 x 226 x 405 Container capacity (L): 75 Pump output (L/min): 89 / 87.8 Opening width (cm): 120