Used Winter Hydraulic Briquetting Press for sale (27,742)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1850x1500x1230 mm Weight 870 kg Ledpovz Eqlefx Aiqshl Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1600x1500 mm Weight 1550 kg Total power requirement 11,5 kw Lhodpfx Aievz Efveqjl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x1170x1510 mm Weight 650 kg Ledpfxovz Eqfj Aiqjhl Total power requirement 6 kw

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Lsdszb Il Njpfx Aiqehl Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, Hydraulic briquette press Manufacturer: Winter Type: BP 450 Year of manufacture according to nameplate: 2022 Technical data: Capacity max. 450 kg/h Motor 35 kW / 400 V, 50 Hz Chip compression min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture < 14 % Briquette dimensions: Length 150 mm, Width 60 mm Dimensions L x W x H: 1,800 x 1,800 x 1,900 mm Weight 3,000 kg Purchase price net € plus applicable VAT. VAT will be shown separately on our invoice. Subject to changes, errors and prior sale. Lhsdpfx Aozxlzneiqjl Sale is made without warranty and guarantee, and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz Lhedsy N R Hmjpfx Aiqel air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Ledpsvz Ex Nefx Aiqjhl Weight 3000 kg Total power requirement 33,5 kw

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Lsdpfxjcmat Us Aiqehl Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Lsdpozxcldjfx Aiqohl Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Lhedpotndu Uofx Aiqel CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Description For sale is a RUF 500 hydraulic briquetting press for compacting wood chips, sawdust, and comparable biomass residues. The machine was manufactured in April 2018 and is in very good condition. According to the machine display, it has only approximately 34.8 operating hours. The RUF 500 is ideally suited for wood processing companies, sawmills, carpentry shops, and recycling and biomass plants that want to efficiently process their residual materials into high-quality briquettes. Technical data: Manufacturer: RUF Maschinenbau GmbH & Co. KG Type: RUF 500 Lodpfxoz Dfcao Aiqjhl Machine number: 2742 Year of manufacture: 04/2018 Voltage: 400 V Rated current: 52 A Frequency: 50 Hz Motor power: 22 kW Throughput: up to approximately 485 kg/h, depending on the material and bulk density Briquette dimensions: approximately 150 × 60 mm Maximum pressing pressure: approximately 1,700 kg/cm² Machine weight: approximately 3,800 kg Dimensions: approximately 2,900 × 2,000 × 2,100 mm Hydraulic briquetting Siemens SIMATIC HMI touch control Suitable materials: Wood chips, sawdust, planing shavings, shredded biomass, and comparable dry residual materials. The machine can be inspected and tested by arrangement. Price: €67,000 plus VAT.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Ledpfxsziahds Aiqohl Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5031183-000 104, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), - Briquetting press with a storage container for compressing textile fibers of various material qualities - Our area of application: textile scraps (dust) from the tearing process - Also suitable for compressing wood scraps - The system was in operation from 2015 to 2020 Technical data: - Briquetting press with a 3kW hydraulic drive - 1400 RPM - 400V, 50 Hz Lhsdpfozcnvkox Aiqjl - Briquetting output, depending on the type of chips and moisture content, 80 - 100 kg/h - Complete with 125 liters of hydraulic oil – including oil cooler and base - Transport lines + supports - Pusher plate SB1 with discharge screw, hydraulics, and electrical control, size 2000 x 2000 mm - Screw motor: 1.5 kW, 34.9 RPM - Hydraulic unit: 0.55 kW - Accessories CE: EC Declaration of Conformity according to Machinery Directive 2006/42/EC Note: The system is located in Ulm and can only be inspected there.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *Selling mobile wood briquetting system. *Press: Ruf RB440, output > 2 tons/hour. *Briquet dimensions: L 150 x W 80 x H 80 - 110 mm Lhedjwhw Syepfx Aiqel *Press completely overhauled, with all supporting documentation. *Truck with valid TÜV (technical inspection) until Jan. 2026, ready for use, also suitable for use in environmental zones / green license plate / tax-free!!! Classified as a self-propelled working machine. *PE packaging bags for approximately 90 tons, included. *Hydraulic pump Linde > New. *Gearbox discharge > New. *Suction fan motor 7.5 kW > New. *Complete hydraulic oil change with oil filter 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232, 335,937 km, built in 1990. *Truck with new, reinforced flatbed body!! Manufacturer: Suhr. *TÜV > New. *Tires, all 6 > New. *Brakes on front axle newly replaced. *Everything is sold with training provided. *If interested, please contact us by email.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, For sale is a highly efficient, perfectly coordinated recycling combination package from the German market leader WEIMA, consisting of the single-shaft shredder WL 600 and the hydraulic briquetting press C 170. Both machines are of German manufacture (“Made in Germany”) and have operated with absolute reliability. We only used this machine for a short time because the project we had planned, involving deadwood from the natural forest, did not work out. However, this had nothing to do with the machine's functionality. We are sending the machine back to Germany because there is no market for it in Chile. We will add more pictures today of the packaged system, which will begin its journey next week. Ljdpfszgq Trex Aiqshl

Condition: reconditioned (used), Year of construction: 2023, Special price for a machine with low usage Base machine: €29,990 net Options available at an extra charge: - Cooling unit: €3,995 net Lhedpfed N Dnhex Aiqsl - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level sensor: yes . Requirements for the raw material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on the agitator: 150 kg - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: good (used), Year of construction: 2006, Capacity 30 - 50 kg/h Diameter of the briquets 50 mm Motor output 5,5 kW Ledoz D Iulepfx Aiqshl Dimensions (L/W/H) 2000 x 1300 x 1400 mm Weight 500 kg 1 m³

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Lodpfjv Sd S Nex Aiqohl oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Briquette press WEIMAR Galant C150 - used Lhsdpszy Nxysfx Aiqel PLC control, Level monitoring, Conveyor screw for the pre-compactor, suitable for under-mounting ----- Technical data ----- Motor power: 5.5 kW, Briquette shape: round, Briquette diameter: 50 mm, Briquetting capacity: 30-50 kg/h, Operating hours: 398.59 hours, Dimensions (L x W x H): 2,030 x 1,315 x 1,185 mm, Weight: 500 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Hydraulics checked - Ready for immediate use

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz Lhjdpfx Aezvz Tbsiqol - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: Ljdpfxju Axfco Aiqohl -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 51179, ENOVENETA Portable Vertical Hydraulic Press, Model PRESSA OLEO SE, Serial 51179, Year 2022, 1,220 weight stated, 220 V, 60 Hz, approx. 2.00 x 1.00 x 2.60 m; PALAZZOLI Control Panel, 220 V, 3-phase; includes solid-wood basket with stainless-steel cart. - Lhedpfszyv N Sox Aiqol Prensa Hidráulica vertical portátil Marca ENOVENETA, Modelo PRESSA OLEO SE, Serie 51179, Año 2022, Peso 1220, Voltaje 220 V, Frecuencia 60 Hz de dimensiones 2.00 x 1.00 x 2.60 mts; Tablero de control Marca PALAZZOLI, Voltaje 220 V, 3 Fases; Incluye Cesta de madera maciza con carretilla de acero inoxidable.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Description 100 TON C FRAME PRESS WITH BOTTOM FORCE BACK UP 40 TON Machine is great working condition, was overhauled cilinder, sealings. AWAILIBLE 3 MACHINES BOTTOM FORCE 40 TON Specifications Manufacturer MULLER 100T Model CEZ 100 Year 1979 Condition Used Press force 100 TON Travel up doen 0-560mm Lhsdpsvldxiefx Aiqsl Travel bottom up 0-200mm Power 15Kw

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Ledex Nhakjpfx Aiqshl Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: used, Year of construction: 1994, machine/vehicle number: 6915, functionality: unexamined, operating hours: 27,436 h, pressing force: 80 t, stroke length: 300 mm, table width: 500 mm, table length: 700 mm, ram plate width: 400 mm, ram plate length: 500 mm, distance table to ram: 500 mm, oil tank capacity: 485 l, overall weight: 6,500 kg, Equipment: documentation/manual, safety light barrier, We are offering this used HYDRAP PRESSEN HPSK80 hydraulic press, year of manufacture 1994. Manufacturer: HYDRAP PRESSEN Model: HPSK80 Year of manufacture: 1994 Condition: used Lhedpjx Ti Auefx Aiqsl Category ID: 1330 Type ID: 1231 Machine type: hydraulic press If you have any questions or require further information, please feel free to contact us by message or phone.