Used Wmw Ap 510X270X65 for sale (3,820)

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm Godju N D Dwspfx Afusbu very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel ranges Travel range X: 1350 mm Travel range Y: 970 mm Travel range Z: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 Kg Horizontal/Vertical Milling Support Working spindle Diameter at the front bearing: 110 mm Drive power: (60% ED) 30 kW Drive power: (100% ED) 29 kW Torque: (60% ED) 1088 Nm Torque: (100% ED) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece mass incl. fixture up to speed of 60 min-1 2000 kg Workpiece mass incl. fixture above speed of 60 min-1 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100%ED) 57 kW Drive torque (100%ED) 2520 Nm Machine is equipped with an automatic imbalance detection system Gedsz Nc Eijpfx Afujbu Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 Kg Internal coolant supply through the spindle center up to a maximum of 80 bar In addition: - Coolant gravity belt filter by Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 by Renishaw Net machine weight with H/V support approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data subject to change without notice. Errors and prior sale reserved.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes Gjdpfxoz Hcz Ss Afusbu - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Gbsdsz Ekfvspfx Afueu Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm Gbedoz Rm Swepfx Afueu -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: -Truing device with diamond insert Work performed: -Guides renewed -Grinding spindle overhauled -Machine completely disassembled and wear parts replaced -Repainted

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Godpfx Afezww R Ssujbu

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 Gbedpfez Rn A Dsx Afuou - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Gbodju N E Abopfx Afueu *

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers Gbodpfx Aoz Rn Aqefueu diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1975, pressing force: 250 t, stroke length: 140 mm, throat depth: 400 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Gjdjz Rnnyjpfx Afuobu Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Gsdpfxoz Rn R Uo Afujbu Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock Gbedpfxjz H Tqde Afueu

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Gsdpfx Afjz Nxmdsujbu Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Year of construction: 1988, condition: used, tool adaptor SK 40 Gbedpfx Afsipyx Esuju weight 165 kg Type Uni. 0 Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315.

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t Gbjdpfx Asipyx Njfueu table height 100 mm weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Technical details: floor-plate length: 7040 mm plate width: 2230 mm plate height: 330 mm weight of the machine ca.: 12800 / Stück kg 2 pieces of cast steel plates for sale free. Surface finished T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm The plates are equipped for side mounting/clamping connection. Through holes 11 pieces Ø 28mm continuous with counterbore Ø 600mm x 260mm and 12 pieces Ø 28mm continuous with counterbore Ø 114 x 270mm. Our price per plate. Gjdpfxsu N Dl Ij Afuobu *

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse Gsdsz H Ttxepfx Afuobu

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Gsdpfxsz Nxlto Afujbu Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: used, Technical details: Length: 600 mm width: 300 mm dimensions L x W x H: siehe Beschreibung m Spotting measuring plates No. 3 size 200 x 200mm with small quadrants No. 4 size 200 x 200mm Gbedsu N Dxzopfx Afuou No. 5: size 580 x 285mm No. 6: size 300 x 300mm No. 7: size 160 x 160mm No. 8: size 600 x 250mm No. 10: size 400 x 280mm No. 11: size 400 x 255mm with 24 kg *

Condition: used, Technical details: floor-plate length: 3000 mm plate width: 1775 mm plate height: 350 mm Gbodpfx Afou N Dglouju Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. *

Condition: ready for operation (used), very good condition. Gjdpfx Ajz N Sqpsfuebu

Condition: used, Technical details: floor-plate length: 4600 mm plate width: 1450 mm plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 7,2 / Platte t 2 clamping plates ( price per plate) Material cast steel Finished surface T-slots according to DIN 650: a=40; h=66; b=71; c=29 mm Center stand 300mm Gjdowtctgspfx Afuobu 6x through holes Ø 41.0 mm *

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Gbodpfxjz Ekb De Afueu Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: good (used), Year of construction: 1988, Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum turning diameter over compound slide: 200 mm Gbsdpfxez Hylbe Afueu Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Gbodpfx Afjz H T Dkouou Overhang: 210 mm Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Speed range: 355 – 710 – 1400 - 2800 rpm Spindle taper: MK2 Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg