Used Wmw Zwfz 6300/40 I for sale (68,654)

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. Wired and ready for testing. Comes with extensive accessories. Technical specifications: Maximum gear diameter: 7,100 mm Gear width: 1,500 mm Maximum module: 45 Table diameter: 4,000 mm Hob diameter x width: 400 x 500 mm Maximum helix angle: 45 degrees Planing cutter diameter: 500 mm Planing cutter speed: 9–63 rpm Total power consumption: 47 kW Machine weight: 160,000 kg Rcsdpsxwlthsfx Amgob

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Redpfjy Ukkpox Amgecb Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm Rcedpfxsu N A Uuo Amgob height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: good (used), Machine number: 26798 TyP / Model: BS 40 AIII drilling capacity steel / cast iron: 50 / 60 mm spindle mounting: MK 5 Speeds: 32 to 1,400 rpm Feed rate: 0.11 to 1.73 mm/rev table: 780 x 650 mm clamping surface: 630 x 500 mm head height adjustment: 250 mm stroke: 280 mm footprint: 700 x 1.200 mm Redpfsiypmxex Amgjcb total power supply: 6,7 kW accessories/equipment: thread cutting function, right-left run; autom. feed, separate control cabinet condition: good weight: 1,5 t dimensions: 780 x 1.200 x 2.700 mm

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm Rcsdpeu N E Abefx Amgsb - swiveable 90° right / left - clamping area 500 x 400mm *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Rodpfx Aev U I Slsmgjcb Mounting: 4 holes, diameter D = 17.5 mm *

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Rjdpfxsxl Rgis Amgocb

Condition: used, Year of construction: 1977, functionality: unexamined, Control type: conventional Axis travel: X: 1120 mm Redpfxewdivvj Amgjcb Y: 345 mm Z: 400 mm Vertical feeds: 5 - 250 mm/min Longitudinal and transverse feeds: 16 - 800 mm/min Table area: 400 x 1600 mm Speed range: 28 - 1400 rpm Tool holder: SK50 Total power requirement: 14.5 kW Machine weight approx.: 3.65 t Space requirement approx.: 2345 x 1950 x 2060 mm (LxWxH) External control cabinet with plug-in connections. Equipment: - 3-axis digital display - Pivoting control panel (suspended) The machine can be tested/demonstrated live on-site. All information is provided without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, Manufacturer: WMW GLAUCHAU Type: SIP 400x500 Year of manufacture: 1974 Total power requirement: 12 kW Control: conventional Machine weight: 5,900 kg Dimensions (L x W x H): 4000 x 1780 x 2400 mm Swing diameter: yes Internal diameter: 800 mm Grinding depth: up to approx. 500 mm Table stroke: 800 mm Distance from workpiece spindle head Grinding diameter in workpiece guard Adjustment of internal grinding attachment Delivery time: short notice Price: on request Rcsdpey Rh D Ssfx Amgeb Type of machine: Internal and face grinding machine 1 unit internal cylindrical grinding machine with face grinding attachment SIP 400 x 500 Special version with enlarged swing diameter and extended hydraulic cross slide Reconstructed and modernized at the Glauchau manufacturer plant 1. TECHNICAL DATA 1.1 Working Range Internal grinding, min./max.: 30/630 (800) mm External grinding, max.: 800 mm Workpiece diameter, max.: 800 mm In workpiece guard, max.: 800 mm Without workpiece guard, approx.: 850 mm Up to grinding spindle carrier, max.: 1225 mm On the table, max.: 545 mm 1.2 Workpiece Spindle Headstock Max. cross traverse: 650 mm Cross adjustment via geared motor and positioning device Swivel range, max.: 15° Workpiece spindle speeds (rpm): 16/22/32/45/63/90/125/180/250 Load capacity, max.: 1000 kg Spindle head (with bayonet flange) DIN 55021 size 11

Condition: used, Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg Rsdpfecx Sc Hsx Amgjcb

Condition: used, Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Rodstxkwvspfx Amgecb -Manufacturer: WMW ABW, thread quick-change chuck SK40 Ovp -Type: WFLK2/ISO40 M16 Ø12X 9 -Dimensions: Ø 62 x 192 mm -Weight: 2.0 kg

Condition: used, turning height: 1,400 mm, turning diameter: 4,000 mm, faceplate diameter: 3,500 mm, Technical data: CNC control Siemens 802 D Redpfx Amou R Ezyegocb Dead weight 66 tons Drive power 63 kW Installation dimensions 13,600x9,800x6,750 mm Face plate diameter 3,500 mm Max. Workpiece height 2,000 mm Max. Support adjustment 30 degrees Max. Workpiece diameter 4,000 mm Max. Workpiece diameter with side support 3,750 mm Number of supports 2 Max. Turning height 1,400 mm Max. Workpiece weight 25 to Max. Speed 30/min Min. speed 1/min

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available. Rodpfexln Iwjx Amgjcb

Condition: used, functionality: fully functional, Very robust East German bench/pillar drilling machine. Manufactured by VEB Werkzeugmaschinenfabrik Saalfeld under the umbrella of the Heckert combine. These drilling machines are known for their robustness and excellent workmanship. Comes with the original nameplate and inspection label. Inventory No. ZG0002. Ideal for workshops, metalworking shops, vocational training workshops, and collectors of East German machine-building technology. Workshop-ready, easy to maintain, and many spare parts are still available. Technical data: - Manufacturer: VW GmbH 3 300014 / VEB WMW Fritz Heckert, Saalfeld + Karl-Marx-Stadt - Model: BS 40 (according to nameplate) - Type: Bench/pillar drilling machine - Drive: Three-phase 380 V (East German era, adapter operation on modern 400 V networks is not critical) Redpfx Amezacddsgocb - Inventory No.: ZG0002 - Inspection label: present (see photo) - Weight: approx. 250-450 kg Collection/Transport: Self-collection with forklift/pallet jack. Loading possible on-site. Shipping via freight forwarder on a pallet by arrangement.

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm Rsdpfju Nfklex Amgscb accessory: - column punch device *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U Rodpswid Uwofx Amgjcb connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm Rcsdeu Ng Ncepfx Amgjb number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm Rcedpfx Amsu Iwwzegjb accessories: -div. outer jaws for lathe chuck i.D. *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm Redpfxsu N Ddwj Amgecb clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Rjdeu Ng Npjpfx Amgecb Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) Rcsdpew Smuksfx Amgjb *

Condition: used, Year of construction: 1980, machine/vehicle number: 21403, functionality: fully functional, power: 4.2 kW (5.71 HP), input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 185 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 700 mm, total length: 1,300 mm, total height: 550 mm, throat depth: 320 mm, table width: 560 mm, table length: 460 mm, overall weight: 1,060 kg, WMW Heckert SABO Standard 40 Column Drilling Machine Including mounted rotary/cross table! Technical Data: Rcedpfxoy H Hn Is Amgsb Manufacturer: WMW Heckert Model: SABO / Standard 40 Drilling capacity (steel): up to Ø 40 mm Drilling capacity (cast iron): up to Ø 50 mm Spindle taper: MT4 Quill travel: approx. 185 mm Throat (spindle to column): approx. 320 mm Speed range: approx. 63 – 1000 rpm, 9 speeds Feed: approx. 0.10 – 1.6 mm/rev, 9 steps Table size: approx. 560 × 460 mm Vertical table adjustment: approx. 350 mm Table rotation: 360° Max. spindle-to-table distance: approx. 550 mm Max. spindle-to-baseplate distance: approx. 1000 mm Reversible spindle rotation (right/left) Supplied with Albrecht quick-change drill chuck Ø 3 – 13 mm Baseplate size: approx. 440 × 490 mm Column diameter: approx. 220 mm Total motor power: approx. 4.2 kW Machine weight: approx. 1,060 kg Dimensions (L × W × H): approx. 1.3 × 0.7 × 2.5 m Year of manufacture: approx. 1980 (estimated), exact year unknown Condition: Fully functional Heavy-duty industrial build Ideal for precise metalworking and fabrication Transport / Shipping: Due to the weight (approx. 1.06 t), self-collection is preferred. Shipping by freight forwarder can be arranged if all costs are covered by the buyer. Legal Notice: All information provided to the best of our knowledge, but without guarantee; subject to errors and prior sale. Sale is made with exclusion of liability for material defects. This exclusion does not apply to claims for damages arising from gross negligence or intent on the part of the seller, nor for injury to life, limb, or health.

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Max workpiece height - 1100 mm Spindle stroke - 400 mm Rcsdpfx Amswazbvogeb Arm length - 1250 mm Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Motor power - 3.7 kW Weight - 3 tons

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Redpfewbt Uqsx Amgscb Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent Rodjgd Uv Dspfx Amgecb -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg