Used Wood-Mizer Complete Sawmill (Mobile) for sale (27,453)

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Pgodpfezagkzox Ai Teu Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, Year of construction: 2022, Woodmizer block bandsaw, year 2022, incl. debarker, electric height adjustment, electric feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kg Pgjdpfx Aijxlnf Aj Teu

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment Pedsyrdg Dopfx Ai Tsgu - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z Podoy Na Hvepfx Ai Togu – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: used, Year of construction: 1993, functionality: fully functional, Complete Sawmill / Sawing Line E.GILLET–KARA-STENNER Description: For sale: complete E.GILLET–KARA-STENNER sawing line for professional timber processing. The line includes log handling, sawing, board discharge, cross transport and length cutting equipment. Suitable for a sawmill or wood processing company looking for a complete production line rather than separate individual machines. Included equipment: 1. E.GILLET wide band saw 2. KARA YS-VI, LS-240 circular saw 3. STENNER 105 wide band saw 4. Log conveyor — 26 m 5. Log conveyor — 7 m 6. Log splitter / log divider 7. Roller table — 16 m 8. Board unloading table 9. Cross conveyor — 8 m 10. RKG 1-400 cut-off / length cutting saw 11. Roller table — 6 m If you have any questions or need more information, feel free to send us a message or give us a call. Pgsdpfozhbr Isx Ai Tsu

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator Pgodpfx Ais Aavnfj Teu – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Psdpfx Ajzki Txoi Tsgu Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: as good as new (ex-display), Year of construction: 2023, Wood-Mizer MP280 – Four-sided planer / moulder • Year of manufacture: 2023 • Condition: Showroom machine, exhibited at trade fairs and exhibitions • Four-sided planing: maximum width 250 mm; standard working height 10–50 mm, up to 100 mm optional • Two-sided planing: width 300 mm; working height 10–230 mm • Single-sided planing: maximum width 410 mm; maximum height 230 mm • Cutter motors: top 4 kW; bottom 3 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.37 kW • Cutter speed: 6,000 rpm at 50 Hz • Side spindle diameter: 30 mm; maximum cutter head diameter: 140 mm • Dust extraction outlets: 1 × Ø125 mm and 3 × Ø100 mm • Central control panel with individual motor operation Pedpfxs Af E Uro Ai Togu Machine location: Romania.

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Pgjdpfx Aoylw Sasi Teu Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] Pgjdpoyr Dawefx Ai Tsu • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars Pgedpfxezqz Sge Ai Teu 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Podpfezqz T Rex Ai Tegu Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: like new (used), Exhibition / Demonstration Machine The new, state-of-the-art, robust band sawmill from Holzprofi is designed for log diameters up to 75 cm and offers numerous possibilities for cutting your wood and logs correctly. Highest cutting accuracy thanks to a cutting thickness calculator. Base galvanized, upper part powder-coated. Suitable for all types of wood, logs, or reclaimed wood. Comes with a trailer, approved for road use. Can be extended indefinitely with extension sections. CE certified. The original, not a replica! Psdpfxozqr Hzs Ai Togu Technical Data: Max. log diameter 750 mm Max. board width 620 mm Motor output S6 7 kW (5.5 kW S1) Motor power, feed motor 0.37 kW Max. feed speed 17 m/min Cutting length 4.2 m (infinitely extendable) Min. cutting length without aids 0.75 m Saw band length 4140 mm Saw band width up to 35 mm Diameter of band wheels 500 mm Band speed 13 m/sec Standard equipment: - Electric feed, infinitely adjustable - Electronic speed display - Electric height adjustment with electronic height display - Cutting thickness calculator with automatic movement to the specified height - Special device for setting the precise wood thickness - 2 base sections - 3 pieces of 90° angle stops - 3 pieces of log clamping devices - Band tension indicator - Bimetal saw band for all types of wood

Condition: used, Year of construction: 2020, Wood-Mizer MP360 – Four-sided planer/moulder • Condition: Lightly used • Four-sided planing: maximum width 350 mm; working height 10–50 mm as standard, up to 160 mm optional • Two-sided planing: width 410 mm; working height 10–230 mm • Single-sided planing: maximum width 510 mm; maximum height 230 mm Pgode Af Ha Nspfx Ai Teu • Cutter motors: top 5.5 kW; bottom 4 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.75 kW • Total power: 16.25 kW • Cutter speed: 6,000 rpm at 50 Hz • Dimensions (L × W × H): 2,970 × 1,125 × 1,430 mm • Weight: 675 kg

Condition: used, Woodmizer EG300 Twin Blade Edger, year 2019, in good condition Technical data: Pass-through width: 550 mm Cutting height: 60 mm Minimum cutting width: 60 mm Maximum cutting width: 410 mm Width adjustment: Electric Minimum board length: 700 mm Saw blade diameter: 2 x 350 mm Motor: 15 kW Feed speed: Infinitely variable 0 to 25 m/min Machine length with tables: 4900 mm Machine width: 1630 mm Machine height: 1250 mm Working height: 900 mm Weight: 988 kg Price subject to change. Errors and misprints excepted. Pgedpfx Aiex H Uhio Tju

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Pgedpeyr I Dmjfx Ai Tsu

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw • Condition: Demo machine, exhibited at trade shows and exhibitions • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm • Arbor diameter: 30 mm • Spindle speed: 4,400 rpm Pjdpfxj Af Hdhj Ai Tegu • Blade tilt: 0–45° • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: excellent (used), Wood-Mizer HR700 horizontal band saw, Main motors: 2 x 15 kW, Blade feed motor: 1.5 kW, Feed rollers: 3 x 0.12 kW, Max. cutting width: 400 mm, Psdpfxozg T Dyo Ai Tjgu Max. cutting height: 370 mm, Guide wheel diameter: 600 mm, Pneumatic material clamping system, Adjustable feed rate via frequency inverter: 0-30 m/min, Hydraulic blade tensioning system, Manual height adjustment.

Condition: new, Year of construction: 2025, • 3kW electric motor • infeed and outfeed table • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm • max. tool diameter: 200mm Pjdpfx Aiozqzuhs Tjgu • max. tool height: 130mm • guide length: 152mm • sliding table length: 1100mm • sliding table width: 350mm • overall table width: 750mm

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Podpfx Asyz Ia Ioi Tjgu Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Pedswa Nrpepfx Ai Tsgu

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, MP410EH30S Processing specifications: 4-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 2mm 2-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm 1-sided Moulding or Thicknessing Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm Cutterhead Specifications Upper Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Lower Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Pgedpfx Aozvcapji Tou Vertical Cutters Diameter 122mm Maximum height 230mm Maximum diameter 142mm Power 5kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Maximum moulding depth 20mm Spindle diameter 40mm Feed Variable feed speed 5-18 m/min Smooth rollers 127mm Grooved rollers 28mm Soft roller 28mm Power / voltage Voltage / frequency 3 x 400 V, 50 Hz Total power 28.6kW Upper cutter 7.5kW Lower cutter 7.5kW Side cutters 5.5kW Upper feed 1.5kW Lower grooved feed 0.55kW Lower smooth feed 0.55kW Sawdust collector Port diameter 1x200mm 1x150mm Recommended fan power 10000m3/h

Condition: good (used), Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Pgodpfx Aexhb Uvji Teu Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Stainless steel pipework and frame Podpfezm R Amox Ai Togu Complete electrical control cabinet Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Maximum operating temperature: 80°C Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Pedpfx Aeztk Atei Togu Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.