Used Zaxe 3D Printer for sale (4,133)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, printer was rarely used at university which does not use it any more Nsdpfew Inrcsx Ac Uslf

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 268 h, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, power: 0.6 kW (0.82 HP), We offer this used Zaxe Z3 3D printer, manufactured in 2024. Product name: Zaxe Z3 3D Printer Input voltage: 100 - 120 V and 200 - 240 V Input current: 12 A and 7.5 A Frequency: 50 - 60 Hz Power: 600 W Printing time: 268 hours Nodezhtiljpfx Ac Uolf If you have any questions or require further information, please send a message or contact us by phone.

Condition: repair required (used), functionality: limited functionality, operating hours: 27,000 h, Large-format 3D printer for hobbyists and mechanics – ideal as a project or for spare parts Important: The device is partially functional and is explicitly sold in this condition – no guarantee, no returns. Model: Hage 140L-B Type: 3D printer (large format) Printing area: 500 × 700 × 400 mm Condition: Partially functional Sold as: Hobby/spare parts item Operating hours: approx. 27,000 hours Price: €1,700 (negotiable) New price: approx. €75,000 Description: Offered for sale is the large-format 3D printer Hage 140L-B with a generous printing area of 500 × 700 × 400 mm. The device is currently partially functional and is therefore ideal for experienced hobbyists, mechanics, and tinkerers. Whether as a source of spare parts, as a basis for a custom modification, or as a challenge for skilled hands – this device contains a lot of technology and potential. The device has approximately 27,000 operating hours and is sold in its current, partially functional condition. Who is this interesting for? • Hobbyists and makers who enjoy repairing and upgrading Nedpozudz Eefx Ac Uelf • Those looking for spare parts for an existing Hage device • Tinkerers who are looking for a large-format project at a low price Pick-up only. Private sale, no warranty. Loading the printer onto a trailer is possible using a forklift.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. Nlsdpfjzwn Tkjx Ac Ujf The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. Njdpozwn Tdofx Ac Uslf A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Nlodpfxszpvdzj Ac Uof Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, functionality: fully functional, operating hours: 1,733 h, overall weight: 90 kg, PRODUCT DESCRIPTION & TECHNICAL DATA For sale is a professional industrial 3D printer, model 3DGence INDUSTRY F340. The machine was used in a controlled environment, regularly maintained, and has very low operating hours for an industrial system. The printer is characterized by its robust construction (approx. 90 kg), high mechanical precision, and the ability to process demanding technical plastics without warping. Thanks to the actively heated build chamber (up to 85 °C), materials such as nylon (PA) or polycarbonate (PC) can be printed reliably and with excellent layer adhesion. Furthermore, unlike conventional desktop or prosumer systems, the INDUSTRY F340 meets all thermal and mechanical requirements for processing high-performance plastics such as PEEK (polyetheretherketone). The combination of high extruder temperature and the actively heated build chamber ensures controlled cooling behavior and prevents thermal stresses (warping) in the component. The system is therefore ideally suited for replacing metal components. It enables the additive manufacturing of components with extreme continuous use temperatures (up to 250 °C), excellent chemical resistance, and outstanding mechanical strength values – making it ideal for highly stable applications in the aerospace, automotive, and medical technology industries. KEY DATA: Manufacturer: 3DGence Model: INDUSTRY F340 Operating hours: 1,733 h Build volume: 260 x 300 x 340 mm (X/Y/Z) Weight: approx. 90 kg (heavy-duty industrial mechanics on ball screw spindles) Connection: 230V SCOPE OF DELIVERY & PRINT MODULES: 3DGence INDUSTRY F340 base machine PRO module: Standard module for PLA, ABS, PETG, PA, carbon fiber reinforced material... HT module: High-temperature module up to 340 °C nozzle temperature for warp-free processing of PC-ESD, PC or CF-PC, unused/in original packaging. Original price was €3500. Nodpfx Acozrt Age Uolf Integrated, actively heated filament drying chamber (up to 70 °C) for moisture-sensitive materials. CONDITION, SERVICE & MAINTENANCE INFORMATION: The machine is in very good and well-maintained condition, both visually and mechanically. Future-proof and investment protection: The long-term availability of original spare parts, consumables and system components (such as the interchangeable print modules) is fully guaranteed, which ensures a high level of operational safety and reliability in productive use.

Condition: good (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, input voltage: 240 V, input current: 12 A, STRATASYS DIMENSION SST 1200 3D Printer Njdpfxozldwhe Ac Uolf - Frequency: 50/60 Hz - Rated current: 12 - 6 A - Internal dimensions: approx. 400 x 400 x 500 mm - Includes matching accessories Note: The item must be collected between September 8th and September 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 560 h, Consumables worth €5,000 included! Nlsdpfx Asxm Uypec Uef HP consumables, all sealed and in original packaging: 5 x 500ml fusing/detailing agent (~5 x €270 = €1,350) 12 x color agents (all colors, ~12 x €130 = €1,560) 1 x color printhead kit (~€950) 1 x printhead kit (~€950) 1 x PA12 Powder We are selling our lightly used HP MJF-580 printer. The unit has exclusively been operated under a valid HP service contract. No contract is currently active. The printer is capable of producing parts in all colors. Collection is to be arranged by the buyer.

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Njdetp Up Ejpfx Ac Uolf Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Nljdpew Inpnofx Ac Uof

Condition: excellent (used), Year of construction: 2018, 3D Systems Sinterstation Pro 140 SLS 3D Printer With Bos Pro 140 Breakout Station, 2 Rapid Change Modules & IRS Integrated Recycling Station Build Volume (Envelope) 550 x 550 x 460mm (22 x 22 x 18"). Layer Resolution Low 15μm (0.006"), Layer Resolution High 8μm (0.0003"). Build Volume Rate 3L/h. Scanning Speed 10m/s. Laser Type 70W CO₂. S/No. 18MAO155 (2018). Note: With 2 Maintenance Services Per Year Since New. This item will be loaded to buyer's vehicle, a loading charge of £100 + VAT will be added to the buyer's invoice. Nlsdjzt N Sgspfx Ac Ujf Description Pro 140 SLS 3D Printer Overall Dimensions W1,880 x D1,795 x H1,970mm. Weight 1,500kg. IRS Integrated Recycling Station Overall Dimensions W1,285 x D1,170 x H2,640mm. Weight 790kg. Bos Pro 140 Breakout Station Overall Dimensions W2,050 x D1,100 x H1,870mm. Rapid Change Module Overall Dimensions W940 x D1,040 x H1,070mm. Weight 380kg. Note: Machine Has Been Decommissioned & Transported To Our Warehouse. Last 5 pictures show decommissioned machine in current state.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup. Nedewna R Sspfx Ac Uelf

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Nledpfx Acezhlr Eo Usf Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: 2 x polyjet print head spares (new) Nlodpfx Acoy S Rp Ho Ujf 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Nsdpfszd Rtasx Ac Uslf

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) Nljdpfx Aezqz Hwoc Usf * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. Nedpfszhr Rhsx Ac Uelf - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: used, functionality: fully functional, Year of construction: 2021, We offer this used Raise3D E2CF 3D printer, model Raise E2CF, manufactured in 2021. Product name: 3D printer Model number: E2CF Power: 350 W Voltage: 100–240 V Frequency: 50/60 Hz Current: 4 A Weight: 35 kg If you have any questions or require further information, please send us a message or contact us by phone. Nlodpfezuk D Tsx Ac Uef

Year of construction: 2019, condition: excellent (used), BEAM MODULO 400 Year Mfg 2019 Siemens Control Build Volume: Approximately 650 × 400 × 400 mm Nsdszvlhpopfx Ac Uelf (or roughly 600 × 400 × 400 mm operational) with continuous 5-axis motion kinematics Laser Source: Ytterbium fiber laser options ranging from 500 W up to 2 kW Deposition Heads/Nozzles: Supports an automatic tool changer to swap between different heads (e.g., the 10Vx for fine precision down to 0.1 mm and the 24Vx for higher deposition rates) without stopping production Powder Delivery: Equipped with a vibrating multi-hopper powder feeder system capable of managing up to 4 or 5 separate material feed options

Condition: used, For sale is a professional Stratasys Objet30 V2 3D printer, manufactured in 2013. Nodpfx Acjzwv E Is Ujlf Technical specifications / features: * Manufacturer: Stratasys / Objet * Model: Objet30 V2 * Year of manufacture: 2013 * Printing technology: PolyJet * Build volume: approx. 294 × 192 × 148 mm * High level of detail and fine surface finish * Professional industrial-grade equipment * Original base frame on rollers Ideal for prototyping, product development, model making, design, and technical components. Used, condition appropriate for its age. Inspection possible by appointment. Collection by the buyer. Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, overall weight: 2,200 kg, construction height: 500 mm, construction width: 800 mm, No minimum price – guaranteed sale to the highest bidder! The original printer was upgraded to the J4100 type in 2025 with a €135,000 upgrade! It is practically as good as new! TECHNICAL DETAILS Maximum build size: 1,000 x 800 x 500 mm Maximum layer thickness: 27 µm Nedpfx Aezkvpyjc Uslf High speed: Up to 3 base resins, 27 m resolution Super-high speed: 1 base resin, 55 m resolution MACHINE DETAILS Power supply: 110 - 240 V Dimensions & Weight Dimensions: 2,870 x 1,960 x 2,105 mm Total weight: 2,200 kg EQUIPMENT Exchangeable print plate with mobile lifting frame Various spare parts PolyJet UV technology

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,300 h, The machine is designed for prototyping and production in FDM technology, which involves applying successive layers of melted material according to previously calculated printing paths. A thermostated work chamber in which two heads work. Printer specifications: - FDM STRATASYS F270 - year of manufacture 2017 - software: GrabCAD Print - 3D printing technology: FDM - number of heads: 2 - building materials: ABS, PLA - support material: soluble QSR - dimensions of the workspace (length x width x height): 305 x 254 x 305 mm Nlodpfxswmk Eqo Ac Uof - camera in the workspace to observe the printing process - capacity of the material drawer: 4 spools (2 spools of building material + 2 spools of support material) - automatic change of the material spool - additional head for PLA - support material washer - printing trays - remote control via computer or smartphone

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. Njdpovblu Dsfx Ac Uslf New nozzle and new print bed just installed, ready for new owner.

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Nsdpfezrfirox Ac Ujlf Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.