Used Zen Surface Llc Ct-160 for sale (20,909)

Condition: new, functionality: fully functional, NEW CT-160 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 0.5 tons/hour (1 m3/h) - compact pilot / small-operation model - Motor: 3 kW / 4 HP (electrical built to order) - Screw speed: low-speed high-torque design - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) Nsdpfx Amo Adykrjkjlh - Discharge cone: adjustable back-pressure - Footprint: 56 x 17 x 58 in - Weight: 700 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, NEW CT-300 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. Nsdpfo Adyk Eex Amkjlh KEY SPECS - Capacity: 3 tons/hour (5 m3/h) - Motor: 15 kW / 20 HP - 480V, 3-phase (440V compatible) - Screw speed: 25 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 163 x 35 x 77 in - Weight: 5,000 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, NEW CT-200 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 1 ton/hour (1-2 m3/h) - Motor: 5.5 kW / 7.5 HP - 480V, 3-phase (440V compatible) - Screw speed: 30 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 102 x 30 x 55 in - Weight: 1,500 lbs Nlodj Adykxepfx Amkoh WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, NEW CT-400 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 5 tons/hour (8-10 m3/h) - Motor: 30 kW / 40 HP - 480V, 3-phase (440V compatible) - Screw speed: 20 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 177 x 39 x 79 in - Weight: 7,050 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Nledpfx Ame Adyk Sjkjh Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, GS-1200 twin-shaft industrial shredder - low-speed, high-torque size reduction for the tough material that chokes single-shaft machines and hammer mills. Two counter-rotating shafts with 48 intermeshing shear cutters pull material in and cut it down - no daily sharpening, no babysitting. PLC control reverses the shafts automatically if a hard object jams the chamber. Nsdpfx Amj Adylpjkslh KEY SPECS - Cutting chamber: 47 x 24 in (1,200 x 600 mm) - Cutters: 48 rotary shear cutters, 9CrSi alloy tool steel - Motors: 2 x 30 kW (60 kW total / 80 HP) - Capacity: approx. 5 tons/hour, depending on material - Footprint: 159 x 71 x 91 in - hopper can be customized RUNS ON: food and organic waste, green waste and plant fiber, wood and pallets, plastics, rubber and bulky solids. Pair it with our CT Series screw presses for a complete shred + dewater line - one supplier, one responsibility. A working shredding video is included with this listing package. Built to order - electrical built to your plant (480V or 440V, 3-phase, 60 Hz). Full spec sheet available, just ask. ZEN SURFACE LLC. Message us through this listing for details, pricing and a live material demo.

Condition: used, Year of construction: 2016, machine/vehicle number: 107198, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Njdpfxjza T D Is Amkjlh The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER TABLE SIZE: 1030 X 630 Njdpevxbn Uefx Amkslh OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000

Condition: used, total height: 2,100 mm, total length: 4,200 mm, total width: 1,700 mm, Year of manufacture: 1991 Colour: Green Empty weight: 4.000 kg Njdpjy Tug Sofx Amkolh - Year: 1991 - Drive system: Conventional - Power [kW]: 5.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1600 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 310 - Table width [mm]: 1730 - Table depth [mm]: 320 - Magnet width [mm]: 1600 - Magnet depth [mm]: 300 - Main spindle power [kW]: 5 - Options: Digital readout - Transport dimensions: 4200mm x 1700mm x 2100mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Nlsdpjz Ipqvefx Amkjh Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs Nledpfx Asvpagdsmkjh air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: Sinumerik, _____ Description: Year of manuf. : 2016 Control : Siemens Sinumerik General: Year of construction:2016 Control:Siemens Sinumerik Chuck diameter:170 mm Swing diameter:240 mm Nlodpfx Asz Htpgemkeh Travel X/Z:720 / 300 mm Spindle: Speed:6,000 rpm Chuck:3-jaw chuck SMW Autoblok KNCS-N 170-43 Tool carrier: Technology:Turret, 12 stations Tool holder:VDI 42 Driven tool holders:Yes Automation: Technology:Integrated workpiece storage Features / Accessories: Chip disposal:Chip conveyor Coolant filtration:KNOLL band filter system (type 240 S-1) Fire protection:Kraft & Bauer argon extinguishing system

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Nsdpfxsz I Iv Rj Amkslh Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Nlodpsu D Dhxefx Amkjh Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: reconditioned (used), Diosna SP 160 AD Spiral Mixer with 2 bowls - 2 timers, 2 speeds - 160 kg dough capacity - after refurbishment Nljdpfxsw Hm Ale Amkoh - 2 acid-resistant stainless steel bowls - perfect condition - possibility of part exchange with another machine

Condition: new, Platform trolley, model 1. Loading platform: L1600 x W800 mm, brilliant blue, load capacity 1200 kg, without handle. * Without handle * Profile steel and steel tube construction, welded, powder-coated, brilliant blue RAL 5007 Nedpfx Ae Acg Rcsmkelh * Non-slip, waterproof wooden platform for accommodating Loading platform width: 800 mm Handle spacing: 90 mm Wheel diameter: 200 mm Tire: Solid rubber elastic Equipment: without handle Tray width: 1 mm Surface: powder-coated Suitable for: 6 handles Design: one-sided Loading platform length: 1600 mm Weight: 63 kg Loading platform height: 295 mm Load capacity: 1200 kg Material: Steel tube Color: brilliant blue RAL 5007

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 160 t, stroke length: 200 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Used Bystronic Xact 160 EP 40-160 CNC Pressbrake For Sale Capacity: 4metre x 160ton With: Cybelec DNC 880S Control 4 Axis (Y1, Y2, X, R + Crowning) Safety Guards Fully Enclosed Rear Glass Doors Nljdpfx Amjx A E Rkskoh Wandering Foot Pedal/Pedestal Stop Serviced with Bystronic UK With upper and lower tooling

Condition: new, Platform trolley, model 1. Loading platform: L1600 x W800 mm, brilliant blue, load capacity 750 kg, without handle. · Without insertion handle · Welded profile steel and steel tube construction, powder-coated, brilliant blue RAL 5007 · Non-slip, waterproof wooden platform for accommodating Nljdpfx Aj Acg N Semkjh Weight: 57 kg Loading platform width: 800 mm Equipment: without handle Tires: TPE Wheel diameter: 200 mm Surface: powder-coated Loading platform height: 295 mm Suitable for: 6 insertion handles Design: single-sided Color: brilliant blue RAL 5007 Handle spacing: 90 mm Load capacity: 750 kg Loading platform length: 1600 mm Material: steel tube

Condition: new, Year of construction: 2018, Chip conveyor including pump, suitable for CTV 160 Nljdpjy Amhysfx Amkeh

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Nledpfsztn Sxsx Amkjh Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: Nodpfx Amjxf T I Njkolh * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Nlsdoy Ey E Rspfx Amkjh Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: new, Glass/panel trolley, double-sided loading platform, L1600 x W800 mm, brilliant blue, load capacity 1200 kg. · Welded profile steel and steel tube construction, coated with plastic. · Single-sided or double-sided design with profile rubber lining. · Platform height 1450 mm. · 2 swivel wheels. Platform height: 1450 mm Nedpo Acg Nlofx Amkolh Design: double-sided Load capacity: 1200 kg Overall width: 800 mm Material: steel tube Platform length: 1676 mm Overall length: 1676 mm Tires: elastic solid rubber Platform width: 2 x 230 mm Overall height: 1783 mm Loading platform length: 1600 mm Weight: 77 kg Color: brilliant blue, RAL 5007 Loading platform width: 800 mm Wheel diameter: 200 mm Surface: powder-coated

Condition: new, Glass/panel trolley, one-sided, loading platform L1600 x W800 mm, brilliant blue, load capacity 1200 kg. * Welded profile steel and steel tube construction, powder-coated. * Double-sided with profile rubber lining. * Platform height 1450 mm. * 2 swivel and 2 fixed rollers, swivel with brake. Design: one-sided Color: brilliant blue, RAL 5007 Load capacity: 1200 kg Overall width: 800 mm Platform length: 1676 mm Loading platform width: 800 mm Weight: 71 kg Nedpe Acg Izofx Amkolh Overall height: 1788 mm Surface: powder-coated Platform height: 1450 mm Overall length: 1676 mm Loading platform length: 1600 mm Material: steel tube Wheel diameter: 200 mm Platform width: 430 mm Tires: solid elastic rubber

Condition: excellent (used), Industrial submersible pump VEB Pumpenwerke Halle KRD 16-A/160/6 for sale, suitable for water pumping and dewatering applications. The pump has been inspected and is in working order, ready for use. Robust metal construction, lower suction basket, stable base, and discharge nozzle with a pin-type connector. Includes a power cable with an industrial plug and a chain, as shown in the pictures. TECHNICAL DATA: • Manufacturer: VEB Pumpenwerke Halle, GDR • Model: KRD 16-A/160/6 • Serial number: 5506576 • Power: 7.5 kW Njdpfjz Sphgex Amkolh • Power supply: three-phase, 380 V • Rated current: 17 A • Frequency: 50 Hz • Performance range: 0–160 m³/h • Head range: 32–0 m • Rotational speed: 2810 rpm • Weight: 80 kg • Power factor cos φ: 0.9 • Insulation class: F • Maximum medium temperature: 40°C Maximum performance and maximum head do not occur simultaneously. CONDITION: Used, inspected, and in working order. Visible signs of use, dirt, surface wear, and superficial corrosion on the chain. The pictures show the offered unit and its actual visual condition.

Condition: excellent (used), Year of construction: 2007, CTV 160 in very good condition. See photo. The machine can be inspected while running. Nsdozv N Efjpfx Amkslh