Used Zoller H 4000 for sale (57,133)

Condition: used, Year of construction: 1987, measuring range X-axis 540 mm measuring range Z-axis 400 mm table diameter 740 mm enlargement 20fach range L-W-H ca. 1,70 x 1,00 x 1,70 mm weight ca. 600 kg Bljdpfx Adjtqqk Ee Aog acc.: DRO on 2 axis

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, total width: 550 mm, total length: 1,160 mm, total height: 950 mm, overall weight: 200 kg, MACHINE DETAILS Blodpfx Adoyf A Ako Asg Dimensions & Weight Dimensions (L x W x H): 1,160 x 550 x 950 mm Net weight: 200 kg

Condition: used, Year of construction: 1983, longitudinal travel 1 mm cross travel 1 mm table length 1 mm weight of the machine ca. 0,5 t Bledju Sbc Aspfx Ad Asg dimensions of the machine ca. 1,5x0,8x1,9 m

Year of construction: 1991, condition: used, Technical details: x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t space requirement of the machine approx.: 2,38x1,45x1,94 m Bedpfx Asu N An Ijd Aelg Adjustment- and Measuring Device - measuring range z = 680mm - measuring range x = 500mm - pneumatical slide clamping - manual endless fine adjustment - turret rotating table - 220V/; 50/60Hz accessories: - taper 1x SK40 and 2 x SK 45 + chisel holder and adapter - brochure Sold as is. EDP not connected - hard disk and software missing *

Condition: ready for operation (used), Zoller CH-2501 projector and transmitted light for H4000, used, in good condition, 100% functional, scope of delivery as per photos. Bjdpfx Adjx Evcxo Aelg

Condition: used, Year of construction: 1991, measuring range X-axis 300 mm measuring range Y-axis 300 mm Table dimensions 800 x 800 mm taper ISO 30 voltage 220 V / 50 Hz total connected load 0,3 kW weight 0,5 t dimensions of the machine ca. 1,5 x 1 x 1,6 m • Tool presetter with taper SK 30, SK 40 is also optionally possible, • Display of measured value ZOLLER DA 6050 / 0266, serial no: H320/066 Bledpotv Icnefx Ad Aog

Condition: used, Year of construction: 1993, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Empty weight: 6.010 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Bedpfx Adjy Ela Ts Aelg Visual appearance: average Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: used, Year of construction: 2006, machine/vehicle number: LC562, Used UHT Milk Preparation Room Tetra Pak 4000 L-h Operating Capacity and Product Versatility The Used UHT Milk Preparation Room Tetra Pak 4000 L-h delivers optimized aseptic thermal processing for dairy and beverage applications. Specifically, the unit operates at variable flow rates from 2000 to 4000 liters per hour, making it suitable for plain milk, flavored milk, drinking yoghurt, and condensed milk. Furthermore, with program adjustments, the same line also processes fruit juices, nectars, and soft drinks. As a result, this flexibility makes it ideal for multi-product operations. The plant currently remains in storage, and as such, is ready for relocation and installation in a new production facility. Blsdsyhbudopfx Ad Aeg In-Line Aseptic Homogenization The Used UHT Milk Preparation Room Tetra Pak 4000 L-h includes an aseptic homogenizer manufactured by Tetra Pak, model Tetra Alex, year 2006. In particular, this unit, positioned downstream of preheating, operates in sterile conditions to ensure the breakdown of fat globules and uniform dispersion of solid and liquid phases. Consequently, it helps preserve the emulsion stability of flavored milk and yoghurt drinks. Moreover, the inline aseptic design reduces contamination risk after thermal processing. Therefore, it maintains the product’s physical and chemical consistency throughout downstream stages. In addition, the robust construction simplifies cleaning and routine maintenance. Clean-in-Place (CIP) System The line integrates a CIP (Clean-in-Place) system supplied by Gemak in 2009, which consists of four dedicated tanks: nitric acid, caustic soda, hot water, and rinse water. Notably, the system automatically sanitizes all product-contact surfaces under controlled parameters. In doing so, it ensures compliance with hygiene standards across multiple cleaning phases. Additionally, it manages solution recovery and water usage optimization across all cleaning circuits. As such, the CIP system in the Used UHT Milk Preparation Room Tetra Pak 4000 L-h minimizes downtime and supports continuous production. Above all, it protects product integrity between production cycles. Thermal Treatment and Holding Time Control The sterilization process relies on a holding coil supplied by Tetra Pak in 2006, designed to maintain the product at the target temperature for the required time. When paired with a tubular UHT heat exchanger, this coil enables indirect and uniform thermal processing. Thus, the system ensures accurate residence times and optimal microbial reduction. Likewise, the unit maintains organoleptic properties through consistent thermal transfer. Therefore, the Used UHT Milk Preparation Room Tetra Pak 4000 L-h delivers reliable processing for both dairy and plant-based applications. Deaeration and Sterile Storage The system includes a Tetra Pak deaerator from 2006, which removes dissolved oxygen and unwanted gases before the UHT process. Accordingly, it improves product shelf-life and minimizes oxidative degradation. Furthermore, the deaerator connects directly to a 3500-liter sterile tank, model Alsafe, also by Tetra Pak (2006). Because of this connection, the product transfers in a closed, sterile environment. In turn, this configuration preserves product sterility after treatment and maintains aseptic conditions up to the filling stage. Technical Conclusion In summary, the Used UHT Milk Preparation Roo...

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, torque: 163 Nm, coolant supply: 20 bar, nominal power (apparent): 30 kVA, number of spindles: 48, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, table load: 400 kg, tool diameter: 70 mm, tool length: 300 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Blodpfxjuw Sq Uo Ad Aeg Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: used, Year of construction: 1990, Zoller H520/019 – tool measuring machine – optical projector for precise inspection of cutting tools. Rotary table (~760 mm), digital readout, robust industrial construction. Used, fully functional, ready for operation. Bjdpey Hl I Tsfx Ad Aelg

Condition: used, Year of construction: 2009, machine/vehicle number: H400C3-0066, Zoller presetting device Hyperion 400 Versatile Flexible turret table configuration as needed Universal One single measuring device for almost all different tool holders Simple Convenient operating elements and user-friendly software Time-saving Turret table equipped with commonly required holders Stable Special alloy and robust construction Economical Consistent use of brand-name products and best price-performance ratio Bodjy D D U Hjpfx Ad Aelg

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 316 mm, measuring range Y-axis: 120 mm, measuring range Z-axis: 315 mm, Zoller Hyperion 320EZ Bljdpfx Aewwl S Hod Aog Tool holders for Miyano, Boley, and Index machines

Year of construction: 2010, condition: ready for operation (used), overall weight: 200 kg, total height: 1,800 mm, product length (max.): 800 mm, table width: 1,500 mm, number of axes: 3, This 3s Zoller SMC 4/4-00060 was manufactured in 2010. It features a measuring range of 215 mm on the X-axis and 415 mm on the Z-axis, making it suitable for high-precision applications. With a high-precision spindle SK-50 and additional features like a spindle brake and 4 x 90° spindle locks, consider the opportunity to buy this Zoller SMC 4/4-00060 optical measurement machine. Contact us for further details. • Measuring range X-axis: 215 mm • Measuring range Y-axis: 0 mm • Measuring range Z-axis: 415 mm • Voltage: 230 V • High-precision spindle: SK-50 • Runout accuracy: 0.002 mm • Spindle brake • 4 × 90° spindle locks Additional equipment Bljdpfjykp Tgjx Ad Aeg • Adapter SK-50 / HSK-A63

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 230 V, Equipment: type plate available, - Universal measuring device for measuring tools in transmitted light (2D) and incident light. Bledpfx Ajygv Iijd Aog - Easy to use thanks to photorealistic input dialog on 2 displays and automatic detection of cutting edges. - Rotary device for radial and axial measurements in incident light. - Special measurement programs for radius contour, rake angle and clearance angle, bevel width, runout compensation, step drilling, coaxiality, and many other features. - Progression contour measurement >lasso< with nominal/actual comparison. - Incident light image processing. Technical specifications: Z 570 mm X 152 mm Measuring range: - Longitudinal axis Z 570 mm - Diameter 250 mm - Repeatability accuracy ± 0.002 mm - Setting accuracy < 2μm - Display accuracy 0.001 mm - Positioning accuracy 0.001 mm - Concentricity accuracy 0.002 mm

Condition: good (used), Year of construction: 2007, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 570 mm, overall weight: 315 kg, - Universal measuring device for measuring tools in transmitted light (2D) and incident light. - Easy to use thanks to photorealistic input dialog on 2 displays and automatic cutting edge recognition. -Swivel device for radial and axial measurement in incident light. - Special measuring programs for radius contour, rake and clearance angle, chamfer width, wobble compensation, step drills, concentricity and much more. - Contour progression measurement >lasso< with nominal/actual comparison. Bjdpfx Aeqc Tkbod Aolg - Incident light image processing >metis 2D< - Protocol editor >Matrix< Technical data Travel Z 570 mm X 152 mm Measuring range - Longitudinal axis Z 570 mm - Diameter 250 mm - Repeat accuracy ± 0.002 mm - Setting accuracy < 2μ - Display accuracy 0.001 mm - Positioning accuracy 0.001 mm - Concentricity accuracy 0.002 mm Optionally, another machine can be offered as a spare parts carrier. However, this is defective.

Condition: like new (used), Year of construction: 2003, Type VSM400-00185 Voltage 230 V Tolerance -10% - +6% Frequency 50/60 Hz Performance < 1000 VA DIN EN 61010-1 Standard Bljdpfx Aeixqwqod Ajg Pneumatic 4 - 6 bar Weight 900 N Year 2003 Good working condition. Please check out our other listings as well.

Condition: used, TECHNICAL DETAILS - Tool holder : HSK 40 - measuring range Z : 250 [mm] Bljdpfjuhb Smsx Ad Aog - measuring range X : 300 [mm] - swiveling diameter : 240 [mm] - max. tool weight : 20 [kg]

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! Bodpfxewbil So Ad Aelg ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: like new (used), FRONIUS TPS 4000 CMT AUSTRIA * We offer the devices in a wide variety of configurations and always have several sets in stock. TPS / CMT / HAND / ROBOT all in stock and available immediately! Sample images of the article. Various CMT hose packages UNIVERSAL or HOLLOW SHAFT robots. A large number of different spare parts in stock, just send us a quick email or call or Whatsapp. The prices stated are all from ... euros. The prices/offers are created individually according to the device configuration. SCOPE OF DELIVERY: .) Fronius power source (Tps 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius wire feeder VR 1550 CMT or VR 7000 CMT .) Fronius intermediate hose package Bledjhpzvwjpfx Ad Aog .) Fronius trolley optional or stand console .) Fronius hose package Robacta CMT version depending on availability .) Fronius RCU 5000i remote control or standard insert (standard operation) .) Harris pressure reducer new and in original packaging .) Ground cable 4m 50mm2 Interface optionally available for an additional charge -> Profibus approx. 800, Interbus 500 euros, Devicenet approx. 800 euros ... Also reachable via Whatsapp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallet possible for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe on request All prices are starting from prices you can configure the devices with us. Robot device or hand device. Long connecting hose package or short. A wide variety of hose packages to choose from. Synchropuls. 270 400 or 500 amp devices in stock. Cmt version available as hand or robot. The best thing to do is to call us, we will discuss your area of application and you will receive an initial price estimate from us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Serial Number - 15066. Date of manufacture - 2015. Bsdpfjy Hkqyox Ad Aslg Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: used, empty load weight: 1,300 kg, maximum load weight: 2,700 kg, overall weight: 4,000 kg, axle configuration: 2 axles, first registration: 06/1978, loading space length: 4,000 mm, loading space width: 1,750 mm, loading space height: 400 mm, total length: 2,350 mm, total width: 2,700 mm, suspension: steel, tire size: 7.00 R 16, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, leaf suspension, mechan. ramps Body: mechanical ramps, wooden floor, ramps: 1800 x 500 mm, was repaired for 1.500,- EUR incl. paint! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Blsdpoi Rnllofx Ad Aog

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Bodpsy Dtyrjfx Ad Ajlg

Condition: new, functionality: fully functional, Year of construction: 2022, total height: 5,050 mm, total length: 5,000 mm, load capacity: 500 kg, throat depth: 4,000 mm, working height: 4,000 mm, Equipment: documentation/manual, Unused column-mounted slewing crane. Jib length: 400 cm. Overall height: 505 cm. Load capacity: 500 kg. Swivels 270 degrees. Wire rope operated trolley with smooth-running carriage. Blodsy Ecp Espfx Ad Aog Everything included, including bolts and chemical anchors for concrete floors. The crane just needs to be assembled and is ready for immediate use. Completely unused, year of manufacture 2022, but never unpacked. CE documents etc. available. Transport can be arranged. Other sizes of column-mounted slewing cranes available: 500 kg, 600 cm jib length, 750 cm height. 1200 kg, 500 cm jib length, 750 cm height. 1600 kg, 500 cm jib length, approx. 700 cm height.

Condition: used, mileage: 60,774 km, power: 90 kW (122.37 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 3,060 kg, maximum load weight: 2,940 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,700 mm, brakes: other, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, loading space volume: 4 m³, operating hours: 5,215 h, Equipment: air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, soot filter, trailer coupling, * German vehicle * From first owner * Original 60,774 km * Only 5,215 operating hours * Condition, see photos * 4x4 all-wheel drive with hydrostatic transmission * Zöller refuse collection system MICRO, type HG 4 HK * Rear loader HL 660 with comb lift for refuse containers 80-770 l * Container capacity: 4 m³ * Loading doors on both sides * Operation possible from both right and left sides * Easy unloading by tipping rearwards * Front lift with municipal hydraulics * Trailer coupling Bledpeytxa Isfx Ad Aeg * Towing capacity: 3,500 kg * Air conditioning * Auxiliary heater * 2 seats * Rear-view camera * Comfort driver's air-suspended seat * Radio * Leaf spring suspension * Rotating beacon * Work lights * Storage box * Raised exhaust * Wheelbase: 2,700 mm * GVW: 6,000 kg * Unladen weight: 3,060 kg * Payload: 2,940 kg If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstanding regarding condition and suitability. Viewings and inspections are possible at any time by appointment and expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to verify the condition and specifications of the goods/vehicles independently. Subject to change, prior sale and errors excepted.

Condition: used, mileage: 165,810 km, power: 231 kW (314.07 HP), first registration: 11/2009, fuel type: diesel, empty load weight: 14,770 kg, maximum load weight: 11,230 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: orange, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, total length: 9,120 mm, loading space volume: 21 m³, Equipment: ABS, air conditioning, differential lock, low noise, Schörling CL21 No. 00394 combination compactor type Zöller 0321 for 120/240/1100 l containers. Turn assist camera, rear steering axle. Non-binding offer – subject to change and prior sale – sale without any warranty – all information without guarantee! Bsdpjygmfrjfx Ad Aslg