Eroding machine

MAKINO U6 H.E.A.T.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, wire diameter (max.): 0.3 mm, overall weight: 250 kg, product length (max.): 800 mm, number of axes: 3, wire diameter (min.): 0.1 mm, This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details. • Spindle speed: 150–2000 rpm • Spindle drive power: 0.75 kW (at 100% duty cycle) • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg Hodpsy Hi T Tofx Anpep • Power supply: 230 V / 50 Hz • Availability: Not specified

Condition: like new (used), Year of construction: 2018, Usable wire diameters: from 0.1 to 0.3 mm. Machine in like-new condition with very few operating hours, mainly used for prototype production. Hedpfjykrcqsx Anpop

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: Hodpfxsx D Ryys Anpop • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total width: 1,600 mm, wire diameter (max.): 0.3 mm, overall weight: 2,500 kg, product length (max.): 1,800 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details. • UV-axes (taper): 400 x 250 mm • Max. workpiece weight: 500 kg • Max. workpiece dimensions: approx. 850 x 500 x 200 mm • Automatic wire threading: Yes • Control system: Charmilles Additional equipment • Extended filter system • Automatic restart Hjdpfx Ajy Ifl Ionpop • Cross rail • Wire tension measuring device

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Hodjyvtbyspfx Anpjp Y-axis: 300 mm Z-axis: 220 mm The machine was in daily use until mid-April; however, the "automatic threading" function is not working.