Tenoning and slotting machine

Martin T 28

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Bedpfx Aljzi A Elezjlp Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Bsdpfxeya Dc Is Alzolp Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: good (used), Code: 0445 Brand: LANDONI - ITALY Model: AGM 1 - CE Standard Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes Technical data: Straight-tooth chain DLC-type with pitch 1" Chain tensioner for automatic chain tensioning Guide bar lenght cm 240 Bjdpfozl Dn Hex Alzolp Useful cutting cm 200 Electric motor Hp 12,5 three-phase Automatic oiling of the chain Overall dimensions: mm 1800 x 900 x 3000 h Dimensions for transport: mm 3900 x 900 x 1900 h Weight kg 300

Condition: used, Year of construction: 1997, spindle tilting: yes -5 bis 45° height adjustment: electric tilting adjustment: electric fence adjustment: manually Höhenanzeige: digital Schwenkwinkelanzeige: digital Bljdpfx Alsz A Eaiezjp Fräsanschlaganzeige: mechanical counter spindle diameter: 30 mm speed: variable power consuption: 8 kW motor brake: yes, automatic suction connection: 2 x 120mm machine length: 1400mm machine width: 1400mm weight: 1100kg

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° Bjdpfex Ityyox Alzolp -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blsdpfx Alezquw Aszop Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Equipment: motor brake, rotational speed infinitely variable, saw blade guard, Saw blade diameter: 800 mm Cutting height (max.): 300 mm Cutting width (max.): 550 mm Overall length: 2,000 mm Overall weight: 1,000 kg Overall width: 2,300 mm Overall height: 2,000 mm Working height: 940 mm Blsdpozd Ubujfx Alzop Input voltage: 400 V Saw drive: 11 kW Saw blade arbor: 40 mm Operating pressure: 8 bar 8 roller conveyors, each 2 m long; roller width: 500 mm

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,080 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 12,100 kg, color: red, Equipment: cabin, ID43482 Machine type: side loader Brand: Bulmor Model: HX JEQ 60/16/45 Bledpfx Alexn Sfrszjp Year: 12/2013 Engine: electric Battery voltage: 80V Load capacity: 6000 kg Lifting height: 4500 mm Lowered mast height: 3080 mm Weight: 12100 kg Tyres: solid rubber, standard

Condition: used, Year of construction: 1990, Working width 520 mm Length of the planing table 3000 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 3000 x 1000 x 1200 mm weight of the machine ca. 850 kg cutting capacity 20 mm SCM F520 surface planer (jointer) Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Working width: 520 mm Cutterblock with straight knives Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Bljdpfx Ale Agw Smozsp Number of planer knives: 4 Max. depth of cut: 20 mm Table height: 860 mm Motor power: 4 kW (5.5 hp) Available from stock, loaded onto transport

Condition: used, Kölle HA 51 planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes Hemag jointing unit. Technical data: - Working width: 450 mm - Working height: 100 mm (joining) Blsdpfx Alezrxzbozsp