CNC lathe

Mazak SQT 30M

Condition: ready for operation (used), Year of construction: 1998, operating hours: 116,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Lsdpfx Ahjz D Dfgeaoah Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1980, turning diameter over bed 1930 mm turning diameter over slide rest 1520 mm turning length 5000 mm turning speeds 0,5-250 U/min spindle bore 105 mm workpiece weight 35 t steady 400-700 mm steady 700-1200 mm steady 1000-1600 mm control Siemens total power requirement 106 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Ledpeyutp Hjfx Ahasah than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Ljdpfoxmd U Ajx Ahasah Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: good (used), Year of construction: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Travel ranges x-y-z: 850 – 280 – 355 mm Table: 1,200 x 370 mm Clamping area: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Laedpfx Aefli Afshajh Spindle mount: SK 50 Quill stroke: 80 mm Feeds for x and y axes: 16 to 800 mm/min Feed for z axis: 5 to 250 mm/min Power: 8 kW Accessories/Equipment: Head swivels Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Laedpexf E Rcefx Ahajh Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1972, turning diameter over bed 1440 mm turning diameter over slide rest 960 mm turning length 8200 mm faceplate 1250 mm turning diameter in the gap 1460 mm length of gap 460 mm Laedpfx Ahsyutq Rsaoh turning speeds 1,8-400 U/min workpiece weight 22000 kg total power requirement 46 kW Machine overhauled 2004 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Diameter over the bed: 1250 mm Lajdpfx Ahjxwqk Eoajh Diameter over the carriage: 900 mm Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm Lodpfxjvxwmts Ahaoah tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Laedpfsrtrzdjx Ahajh Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: excellent (used), Year of construction: 1983, - Turning diameter over bed [mm]: - 1000 - Turning diameter over support [mm]: - 630 - Turning diameter in the bridge recess [mm]: - 1230 - Spindle bore [mm]: - 120 - Center distance [mm]: - 2000 - Rotation speed range [rpm]: - 5 ÷ 500 - Maximum workpiece weight in the chuck: 1300 kg - Machine weight: 10000 kg Laedpfeytnt Djx Ahajh