Vertical machining center

Mazak VCS 430A SN 249154

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm z-travel 570 mm max. workpiece weight 1200 kg spindle turning speed range 12000 U/min weight of the machine ca. 7,1 t Hjdpfeyyc Svex Aqgefn required space 5,00 x 3,20 x 3,00 m

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Hfodpfx Aqey St E Rsgsn Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Hsdpfxjzf Nccs Aqgefn

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Manufacturer: Machine Type: Year of manufacture: Date of commissioning: YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 FEATURES: - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 Hedpfx Aqezda Dvsgsfn ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B

Condition: ready for operation (used), Year of construction: 2005, Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement. Hfodpjy Ulmrsfx Aqgon

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,169 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,920 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details. Hjdpfx Aszl S S Tsqgofn - Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)- Axis Travel X/Y/Z: 1050 / 510 / 510 mm- Table Dimensions: 1300 x 550 mm- Maximum Table Load: 1200 kg- Spindle Speed: Up to 12000 rpm- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)- Tool Taper: SK 40 / BT 40- Tool Magazine Capacity: 30 stations- Tool Changer Type: Double gripper changer- Rapid Traverse Rate: Up to 42 m/min- Total Power-On Time: 46722 hours (as of 07.07.2026)- Automatic Operation Time: 17776 hours- Cutting Time: 15817 hours- Pure Cutting Time: 13169 hours- Weight: Approx. 6920 kg- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA- Control Circuit: AC100V, DC24V- Main Motor: Max. 47 A, 400 V- Included Accessories / Components:* Chip conveyor (chain conveyor) with discharge to chip container* Donaldson Torit DCE oil mist separator* Portable electronic handwheel* Coolant system with spray gun / compressed air gun* Machine vise (NC vise)* Approx. 100 SK 40 tool holders* Tilting chip container (green cart)* Worklight / interior lighting* Full enclosure- Renewed parts during 09/2025 service: Spindle cartridge, rotary joint, non-return valves, filters for air/lubricating oil, oil mist separator element Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm Hfjdpfoy Ey N Njx Aqgen • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm Hfodpozpygaofx Aqgen • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan • High-pressure coolant through spindle system (stated as 15 kg)