Band saw

MEBA 320 GHSS

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and frame lifting to pre-set height after completion of the cut. Stepless hydraulic monitoring of cutting pressure and feed at the saw band feed. This ensures optimal conditions for every sawing task, i.e., constant pressure with solid material and constant feed with thin-walled profiles. Especially suitable for universal applications with varying cross-sections, materials, and frequent miter cuts. Machine control in compliance with CE standard 89/289. Technical Data: Round/Flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid downfeed of the saw frame to material edge via push button Iedpfjhppabsx Afvetc Manual miter adjustment from 90° to 30°, stepless via scale The miter rotation point is at the intersection between saw band and fixed vice jaw, thus no change in length measurement with changing angle positions Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralized machine controls Saw band drive with end-stop Movable band guide arm, adjustable to material width Saw band deflection wheels – carbide guides Powered chip cleaning brush Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/RAL 7031) Remnant piece length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable at the control panel Drive: Saw band 3.0kW; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Stepless up to 300mm/min, hydraulically controlled Saw band tensioning: Mechanical with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without installation elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser guide Micro-spray device Clamping pressure regulator Support table on the infeed side