Band Saw

MEBA 320 GHSS

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with workpiece clamping, sawing, and raising to the set height after the cut is completed. Infinitely adjustable hydraulic cutting pressure and feed rate control on the back of the saw blade. This provides optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed rate for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials, and frequently changing miter cuts. The machine control complies with CE standard 89/289. Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 This model is also available with double miter capability as model 320 DG! Rapid lowering of the saw frame via push button to the material edge. Dkedpehppabofx Akton Manual miter adjustment from 90° to 30°, infinitely adjustable via scale. The miter pivot point is the intersection between the saw blade and the fixed clamping jaw, which means there is no change in the length measurement when the angle is changed. Hydraulic full-stroke workpiece clamping - CETOP hydraulic system. At every angle position of the saw frame, the material is clamped parallel at 90°. Complete coolant system with electric submersible pump. Central machine control. Saw blade drive with end-of-travel switch. Adjustable blade guide arm, adjustable to material width. Saw blade guide pulleys with carbide guide. Chip cleaning brush. Saw blade tensioning with torque wrench. Paint finish: silver gray / blue gray (RAL 7001 / RAL 7031). Remaining piece length: 25mm. Cutting speed: AC frequency-controlled drive 15-150 m/min, infinitely adjustable at the control panel. Drive: Saw blade 3.0kW; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely adjustable up to 300mm/min, hydraulically controlled. Saw blade tension: Mechanical with torque wrench. Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without mounting elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are possible: Laser light Micro-spray device Clamping pressure regulator Support table on the feed side.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t Dsdpfxsupw R Ao Aktjkn dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 052022-28888-01, overall weight: 1,800 kg, total length: 9,700 mm, load capacity: 5,000 kg, working height: 6,000 mm, Equipment: documentation/manual, Verlinde 5,000 KG single-girder overhead crane in new condition. - Span: 9,538 mm - Lifting capacity: 5,000 KG - Lifting height: 6 m - Year of manufacture: 2022 - Control: radio-controlled Autec - Crane manual: available Speeds: Crane travel: 2 - 32 m/min. (Frequency controlled) Trolley travel: 5 / 20 m/min. (Relay controlled) Lifting/lowering: 0.80 / 5.00 m/min. (Relay controlled) Delivery, customization, installation, inspection, and commissioning are all possible upon request. Is this crane not exactly what you are looking for? We have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and swivel cranes - Chain hoists Dedpfxjzbyige Aktskn - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, bridge crane, Abus, Demag, Kone, Konecranes, Stahl