S/S SAFELINE METTLER TOLEDO X-ray detector

METTLER TOLEDO

Year of construction: 2013, condition: ready for operation (used), Output: 1000/min, number of cameras: 2. On-site inspection is possible. Isdsucfxajpfx Ah Tjif

Condition: excellent (used), Mettler Toledo AutoChem FCM Fluid Control Module Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Machine Type: Fluid Control Module / Fluid Handling Module Line Voltage: 220 VAC Line Frequency: 50/60 Hz Offered is a Mettler Toledo AutoChem FCM Fluid Control Module for corresponding laboratory, reaction, and process systems. The device features an integrated Mettler Toledo FCM-1200 Modifier Fluid Pump, as well as the associated fluid lines, fittings, and connections. Iisdpfxezt Nzhe Ah Tsf The module is designed for the controlled delivery or handling of fluids within corresponding Mettler Toledo AutoChem systems. Technical Data: Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Line Voltage: 220 VAC Line Frequency: 50/60 Hz Fusing: 4 A Time Delay Integrated Pump: FCM-1200 Modifier Fluid Pump Pump Part Number: 16001176 Interfaces / Connections: 2x REMOTE interface GPIB interface Front-side INLET/OUTLET connections Additional fluid connections on the rear of the device IEC power connector Dimensions: Width: approx. 450 mm Depth: approx. 650 mm Height: approx. 550 mm Dimensions W x D x H: approx. 450 x 650 x 550 mm Equipment: Mettler Toledo FCM-1200 Modifier Fluid Pump Integrated fluid lines and fittings INLET/OUTLET connections REMOTE interfaces GPIB interface Status indicators Metal housing with side service panel Shipping Data: Weight: approx. 50 kg Due to its size and weight, shipping by freight forwarder is planned. Condition: Used condition with signs of wear and tear consistent with age and use. The exact technical functionality has not been further verified. Condition and design, see product images. Scope of Delivery: 1x Mettler Toledo AutoChem FCM Fluid Control Module as shown. The scope of delivery corresponds to the product images. Subject to changes, errors, and prior sale.

Condition: new, Mettler Toledo SDCC300sT weighing platform, serial number 2837953, unused, in opened original packaging, 100% functional. Iodji Eb Elopfx Ah Teif ATTENTION: Please request separate quotes for packaging and shipping costs!

Condition: used, Metal Detector Checkweigher Combination System Mettler Toledo Garvens XS 3 Iiodpfx Asztnu Toh Tjf This combination system is an advanced solution for accurate weight control and reliable metal detection in modern production lines. The metal detector checkweigher combines a high-quality checkweigher with a powerful metal detection system in a single, compact unit. The machine is ideal for use in the food industry and other sectors where food safety and quality control are essential. This industrial weighing system automatically weighs products and checks them for metal contaminants, such as ferrous, non-ferrous, and stainless steel particles. The checkweigher combination enables efficient product inspection without interrupting the packaging line. The user-friendly control system allows for quick product changeovers and easy adjustments. This minimizes downtime and increases productivity. The metal detector and checkweigher work together seamlessly to ensure optimum product safety. Ideal for food manufacturers, packaging companies, and industrial applications. A reliable choice for companies looking for a professional metal detector checkweigher solution. - Production capacity: 83 pcs/min - Weighing range: 20–3000 g - Graduation: 0.5 g - Working width: 300 mm - Equipped with: two pneumatic rejectors (metal detector and checkweigher) - Metal detector aperture: 345 x 105 mm - Infeed and outfeed height: 810 mm (adjustable by an additional 70 mm) - Voltage: 100–240 V (1 + N, 50/60 Hz) - Power: Not specified - Year of manufacture: 2014 - Weight: 415 kg - Dimensions (W x D x H): 2530 x 1320 x 1630 mm

Condition: excellent (used), Year of construction: 2019, Continuous Weigher, Checkweigher Manufacturer: Mettler Toledo Model: PBK987-CC150 High-precision weighing platform The conveyor belt and frame were manufactured by Modumac Dimensions: Belt width: 430x848 mm Max. width: 628 mm Height: 700 mm Maximum load: 150 kg Iiodpfsv Urqfex Ah Tof We have two of these! Price per unit!

Condition: used, This listing is for Mettler Toledo Seven Excellence Multiparameter Meter The unit is in full working condition and ready for immediate use This multiparameter meter is a high-quality lab instrument manufactured by Mettler Toledo (Model: Seven Excellence). A modular and highly precise instrument capable of measuring pH, conductivity, and other crucial electrochemistry parameters. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Iiodszqf Ixspfx Ah Tsf Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT Ijdsyxcqvopfx Ah Tsif - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz - Fuse: 6 A - Power rating: max. 600 VA Isdpfx Asy Drl Heh Tsif - Software: STARe Software V16.30 - Operating system: Windows 10 - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Iijdpszix Ddjfx Ah Tjf Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Please feel free to contact us by phone for further questions.

Condition: new, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 2780552, Hello, selling a new Mettler Toledo weighing bridge Type: MB60S Iijdjvl Ir Tepfx Ah Tjf in original packaging. Weighing cover 500x400mm All data for this model can be viewed under Mettler Toledo. Model is no longer produced. Shipping possible - Please enquire about shipping costs.