CNC lathe

MORI SEIKI NLX 2500Y/700

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,500 h, number of axes: 3, This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Additional equipment • KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle • Coolant system with increased pressure (5 bar) • Hinged belt conveyor, right-hand discharge • Integrated parts catcher for the main spindle • Interface for bar feed, LNS • Double foot switch with protective cover • Signal light (red, yellow, green) Bsdpfxex D D Uwe Ah Ield • Tool overhang length 100 mm for driven Y-axis travel + Tool holder package • Transformer 45000 VA • 15 bar pump with filter Extra Information The machine has only approximately 6,500 operating hours and is in top condition Included in the price of the machine: 12 driven toolholders, including quick-change systems, and 17 static toolholders. Value new: over €30,000

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm Bjdeikbtnopfx Ah Iold z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Bledpot Akirofx Ah Ijd Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: Bsdpoq Ui Hqofx Ah Iold X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), mileage: 582,537 km, first registration: 04/2009, fuel type: diesel, axle configuration: 10x4, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, parking heater, power mirror, retarder, soot filter, spoiler, = Additional options and equipment = - Aluminum fuel tank - Low noise emission - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Central lubrication system = Further information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Steered Rear axle 2: Twin tires Rear axle 3: Twin tires Weights Unladen weight: 36,399 kg Payload: 17,601 kg Gross vehicle weight: 54,000 kg Functional Mast: Telescopic (8 sections) Mast length: 24 m Lifting capacity: 30,000 kg Lifting height: 2,400 cm Crane: FASSI F1500AXP.28, mounted behind the cabin Superstructure brand: FASSI F1500AXP.28 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Identification Bedpfxsuxu Thj Ah Iold Registration number: BV-XP-06 DAF XF 105.510 10X4 Tractor Unit + FASSI F1500AXP.28 Crane EURO 5 L PACKAGE 480 HP DRIVE 10X4 WHEELBASE 570 CM AIR SUSPENSION XF SLEEPER CAB WITH AIR CONDITIONING, AUXILIARY HEATER, REFRIGERATOR MANUAL TRANSMISSION FIFTH WHEEL MULTIPLE TOOLBOXES FASSI F1500AXP.28 CRANE 150 T/M CRANE!!! 2X OIL COOLERS FOR CRANE HYDRAULICS 8X HYDRAULICALLY EXTENDABLE WORKING HEIGHT 24 METERS MAX LIFTING CAPACITY 30,000 KG MAX LIFTING CAPACITY AT 19.4 METERS 4,465 KG CENTRAL LUBRICATION SYSTEM FOR THE CRANE 4X OUTRIGGERS RADIO REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: excellent (used), Year of construction: 2005, X 450 Y 300 Z 300mm, BT 30, 10.000Rpm, cooling trough spindle, paper filter, Mitsubishi Bledpetiyl Eofx Ah Iod

Condition: good (used), Year of construction: 2008, functionality: fully functional, - Control: Sinumerik (Index C200-4D) - Bar capacity: 65 mm - Spindle speed: 5,000 rpm - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Travel range Turret 1/2: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Rear-side machining 5 rear drilling stations - C axis - Chip conveyor Machine weight approx. 3,000 kg Floor space including control cabinet and chip conveyor: Blodpfoyb Ndyjx Ah Ijd LxWxH: 3,430 x 1,240 x 1,750 mm Bar feeder: INDEX MBL Weight: approx. 2,000 kg Dimensions LxWxH: 4,500x1,100x1,500 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30.000 [mm/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 23.456 [h] - Number of working hours : 16.703 [h] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - CNC option : extanded Memory 500 Mo - CNC option : High accuracy mode BⅡ - Type of divisor : 4e axe CNC intégré * manufacturer : YUKIWA Bjdpfx Ahexzu T Se Isld * model : DRC170-EU * travel 4th axis : 360 [°] * indexing precision 4th axis : 0,001 [°] * clamping diameter : 140 [mm] * center height : 135 [mm] * with counter bearing * Coolant tank : 150 [l] * with high-pressure pump : 15 [bars] * With cabin washing - Coolant through spindle - Tool probe - Electric transformer

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Bsdpfjw Imq Rox Ah Iold

Condition: used, TECHNICAL DETAILS - Max. diameter : 68 [mm] - Tubes number : 6 - Max. bar length : 4400 [mm] EQUIPMENT Bedpeuhbkcofx Ah Iold - Hydraulic tank