HL 15

MSM

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, tiltable vacuum press with a pressing area of 3,500 mm x 1,420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press will be powder-coated in RAL 7012 and RAL 7035 finishes. Special colors are possible upon request but must be discussed beforehand and may incur additional costs. Welded table construction for professional use, mounted on a tiltable transport cart, equipped with 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be tilted to save space and locked in place, reducing its depth to 800 mm. The tabletop consists of a 22 mm thick laminate MDF board, covered in the pressing area by a slotted vacuum distribution plate made of MDF. Membrane frame opening is supported by 2 gas pressure springs mounted on the sides of the machine. Equipped with a natural rubber membrane, 2 mm thick, with 780% elasticity and temperature resistance up to 70°C, fastened using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is achieved via a sealing profile in the membrane frame. Rjdpfeywpt Ijx Aizot Oil-lubricated rotary vane vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks, providing a total capacity of 200 liters. The evacuation and venting of the pressing chamber is carried out via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, you may opt for initial setup and a brief instruction session by one of our staff members. Should you wish to take advantage of this service, we will be happy to provide an additional quote. Summary of key features: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, very high recovery properties, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h oil-lubricated - Maximum negative pressure: -0.99 bar - Maximum pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locking mechanism - Additional 13 mm vacuum connection - Pressing area: 3,500 x 1,420 mm - Table height to vacuum distribution plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1,030 mm - Installation dimensions (ready for operation): 3,790 x 1,700 x 2,150 mm (LxWxH) - Installation dimensions (tilted): 3,790 x 800 x 1,750 mm (LxWxH) Customs tariff number: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2005, MSM dryer (6-9) Model SD65, 2800W, with moisture regenerator, molecular sieves, with plastic intake, 2005 Rjdpfx Asyznz Soizst