Combine harvester

New Holland CR 8.90

Engine:
- FPT Cursor 13 engine
- Tier V emission stage
- Hi-eSCR2 technology
- 12900 cm³ displacement
- 6 cylinders
- Turbocharger
- Intercooler
- Common rail injection
- Rated power: 365 kW at 2100 rpm
- Max. power: 400 kW at 2000 rpm
- Self-cleaning and pivoting radiator rotary screen
- Fuel tank 1300 l
- AdBlue tank 130 l
- Rotary screen brush

Drive and axles:
- Hydrostatic drive
- 2-speed gearbox with electronic gear preselection
- Overload protection
- Parking brake
- Wet multi-disc brakes – electro-hydraulic differential lock
- Adjustable rear axle
- 30 km/h at reduced engine speed

Feeder:
- Automatic feed pressure control and cutting height adjustment of the cutter bar
- Inclination and angle adjustment of the cutter bar
- AutoFloat system
- Hydraulic quick coupler for cutter bar
- Hydraulic reel drive
- Hydraulic engagement of cutter bar/reel and feeder
- Dynamic feed roll (450 mm diameter, 1100 rpm, reducible to 640 rpm, 8 bars)

Cutter bar:
- 760 CG, 10.70 m Varifeed: Bolted short crop dividers
- Scraper strips on the feeder
- Lower scraper strips
- Reel
- Reel speed sensor
- Header lifters
- Left and right rape seed separation knives
- Kit for rape seed separation knives
- Rear wall extension
- Knife position sensor
- Replacement knives
- Knife guard
- Knife bar 3" fine
- Knife drive
- 57.5 cm adjustment range
- Spare wheel
- Guide wheels

Threshing and separation:
- 2 longitudinal rotors
- Counter-rotating for threshing and separation
- 2.64 m rotor length; 0.559 m diameter
- Engine speed with 2 speed ranges: 331 - 697 or 668-1407 rpm
- Electrically adjustable from the cab
- 1 threshing basket per rotor with 18 basket bars
- 123° wrapping angle
- Electrically adjustable
- 2 separating baskets per rotor
- 1 finger basket
- 148° wrapping angle
- Discharge drum: 4 bars
- 1.57 m wide, 0.40 m diameter
- Speed 800 rpm
- Separating basket - wrapping angle 54°
- Total threshing and separation area 3.06 m²
- Adjustable guide plates in the rotor covers for controlled material flow
- Twin Pitch PLUS rotors

Cleaning:
- OptiClean cleaning system
- Increased cascade stages
- Counter-rotating pre-cleaning floor and upper sieve
- Electrically adjustable vane sieves
- Total sieve area 6.50 m²
- 2 separate re-threshers
- Electronic monitoring
- Automatic slope compensation up to 17% of the pre-cleaning floor
- Cleaning fan and sieve box
- Cleaning fan with two fan outlets
- Speed adjustable from 200 to 1100 rpm
- Access to the pre-cleaning floor through large service openings on both sides of the machine

Grain elevator & grain tank:
- 12,500 l grain tank volume
- 126 l/s unloading rate
- 6.4 m unloading spout
- Grain tank with 2 level indicators
- Grain tank lighting
- Grain sample extraction
- Adjustable work lights on the unloading spout

Straw and chaff distribution:
Gkjdjz Na H Dspfx Afuec
- 6-row straw chopper and hydraulically driven chaff spreader
- Tool-free change from straw laying to chopping operation
- DualChop chopping bar
- Active straw distribution OptiSpread plus
- Adjustable working width
- Distribution and throw direction (in case of side wind)

Driver's seat:
- Adjustable comfort seat with air suspension
- Partial leather seat with additional comfort features
- Passenger seat
- 3-way adjustable steering column, automatic climate control
- Refrigerator with adjustable temperature
- Multifunction lever: Direction of travel and travel speed
- Raise/lower cutter bar
- Inclination adjustment
- Reel

The listing was translated automatically. Translation errors are possible.