Mitre saw

Omga

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Blodjg Tumcopfx Ad Ajg Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, DOUBLE GLASS BEADING SAW TRF 527 NC FP CA MM.4000 (according to nameplate) Double mitre saw for simultaneous cutting of two superimposed glass beads. Right saw unit is fixed; Adjustment of the left unit is based on the set cutting length, which can be read from a digital display. Units are equipped with supports that enable simultaneous cutting of 2 glass beads. For cutting larger cross-sections, the upper support can be removed. Bledpfx Aoy Er Ikjd Ajg After the cutting process is completed, the pneumatic clamping cylinders automatically swivel to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measurement display • Pressure monitor • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release and motor protection switch • Pressure monitor • Tool kit • Safety covers with horizontal, swiveling clamping devices • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor output 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 4000 mm • Min. cutting length 158 mm • Weight approx. 290 kg • Space requirement (standard equipment) approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediate angles. Additional central support. 1 set of adjustments for rebated profiles 1 set of adjustments for rebated profiles according to drawing: - Adapter on the clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central piece. The sketch below (in green) shows a beveled presser following the inclined profile and pressing it against the (red) shim on the stop. Details provided without guarantee.

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Bedpfxsxnlgce Ad Ajlg Storage location: Garbsen

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support Blodpfx Aoyyyw Asd Aeg - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: like new (used), functionality: fully functional, MITRE SAW , orientable +/-45° model OMGA T50 350 with dust aspirator second hand machine working conditions : Excellent CE regulation : Yes with extractor cabinet ( dust aspirator ) with flat diagram extensions Technical data : Bodpfx Adom Ak Ele Aslg volt. 380/50 engine power Hp 3 ( kw 2,2) blade diameter mm. 350 with 90° blade : max height cut mm. 110 width max. cut mm. 130 with 45° blade : max. height cut mm. 110 max. width cut mm. 92 machine weight kg. 90 extractor cabinet weight kg. 50

Condition: used, functionality: fully functional, saw blade diameter: 300 mm, total length: 405 mm, total width: 90 mm, total height: 125 mm, overall weight: 500 kg, OMGA TR2 Double Miter Saw for Wood and Aluminium – After Technical Overhaul, Ready for Operation Specification: • Condition: Used, after a comprehensive technical overhaul • Manufacturer: OMGA • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) • Pneumatic control of cutting heads • Max. cutting length: 320 cm • Min. cutting length: 15 cm • Max. cutting section: 85 x 140 mm (at right angle) • Max. blade diameter: 300 mm • Angle cutting range: from -45° to +45° (left/right) • 3 operation modes • Vertical workpiece clamps • Weight: approx. 500 kg • Overall dimensions: 405 x 90 x 125 cm (L x W x H) Additional Information: • The machine is in good technical condition and ready for immediate use • The photos presented show the actual condition of the item for sale • It is possible to connect and test the machine on site Bljdpfx Ajy Dpxdjd Asg • The auction price does not include VAT or transport costs Financing and Transport: • We organise transport using the MDD fleet, courier services or external carriers • We offer financial support in the form of leasing or lease loans

Condition: excellent (used), functionality: fully functional, OMGA Radial Arm Saw RN 450 Bedpfx Aeyzp Dnod Aelg Cutting width at 90° max: 450 mm Maximum cutting height: 80 mm Saw unit adjustable in two planes Saw blade speed: 3000 rpm Main motor power: 2.21 kW Blade diameter: 300 mm Power supply: 220V

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 Bjdpfsyy S Uaex Ad Aolg For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1989, - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 106 - Max. cutting height [mm]: 80 - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 - Voltage [V]: 380 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bjdpfoxaniwsx Ad Aslg Yorick Diebels

Condition: used, Year of construction: 2010, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 6.719 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 7.13 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Bedpfeyna Aajx Ad Aelg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels