Used Ott Edgebander for sale (79)

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg Gedpfx Aoxymfwef Eeir

Condition: like new (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 25 mm, total length: 8,600 mm, Equipment: CE marking, Ott Edge Banding Machine Type StrongEdge The machine was completely overhauled some time ago and is being sold due to business closure. The machine is in top condition and can be sold with a warranty. Workpiece thickness: 8-60mm Feed speed: 20m/min with corner copying Automatic continuous lubrication Beckhoff bus control system CombiMelt PUR bonding system for zero-joint appearance Jointing Edge magazine Gluing End trimming Flush milling Longitudinal milling Corner copying controlled by AKF Scraper blade R1 and R2mm Surface scraper blade Buffing unit (convertible to texture finish) Nesting package Pivoting grooving unit Gsdpfx Aey Azcfsf Ejir Sanding unit Angle feed-in aid

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Gisdsy Aplzopfx Af Ejr Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg Giedpjych Igsfx Af Ejr 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Gijdpfx Ajyh H Aqof Eor Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: ready for operation (used), Manufacturer: OTT Type: TKS working height: 800 mm Dimension: W 1.060 x L 720 x H 930 mm weight approx.: 120 kg Gedpfx Afehir A Ho Ejir Condition: used

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Giedpfx Aeyyyftjf Eor Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg. Gijdpfx Asyxcmqef Esr

Condition: excellent (used), Year of construction: 1991, Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch Main switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety pull cord Rack compensation CE conformity Pressing area: 2,500 x 1,300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirement (L x W x H) approx.: 2,900 x 1,250 x 1,900 mm Weight: approx. 3,800 kg Request more information NEW MYLAR FILM on both heating plates NEW hydraulic cylinder seals Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex works – free loaded! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at their location. Gjdpsyyn Rdsfx Af Esir • Special agreements are only valid in written form. (Your inquiries will only be answered with your address and telephone number!)

Condition: used, OTT Tornado - TOP Control via a 15-inch color touch monitor for full automation and maximum operating convenience CM-CombiMelt gluing system suitable for processing both EVA and PUR hot-melt adhesive as well as all standard cleaning granulates Joining unit for bonding chipboard panels Automatic roll magazine Automatic edge magazine Double end trimming unit with automatic swiveling 0° / 3° Flush trimming unit - for flush trimming - 12mm Fine radius trimming unit - radius trimming - profile cutters R2 - R5 Automated copy milling - corner rounding Scraper unit - radius - chamfer Flat scraper unit Release agent spraying device - PU Cleaning set with fine polishing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Godpfx Aeyym Dcof Eoir Complete set of tools included Machine is in EXTREMELY WELL-MAINTAINED CONDITION Machine from a joinery workshop Available from stock in Lieboch

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Godpfx Aevvkfqof Esir

Condition: used, Year of construction: 1984, pressing area: 3000 mm x 1350 mm opening: 400 mm heating: electrically plate sourface: alu Gijdpfx Aoyxgaujf Eor emergency stop switch: yes / ripcord pressure: 140 t number of cylinder: 8 electriticy: 34 A motor power: 22,4 kW machine length: 3550 mm machine width: 1550 mm

Condition: used, maximum load weight: 12,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 09/2025, loading space length: 7,400 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, loading space volume: 41 m³, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, tail-lift, * Tail lift - Palfinger MBB 2000kg * Air suspension Gsdpjyvw S Nofx Af Esir Safety: ABS * EBS * Disc brakes * 4x Jost crank supports * Spare wheel holder * Wabco braking system * Tyres: 385/65R22.5 * Lashing rail * Interior lighting

Condition: excellent (used), Width 110 cm 13 kW Gjdpfx Aforf S Rke Eoir You can call or write to us. We can speak and write in German and Russian. You can also send messages in English 32.4.10.

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press size: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Robust construction Ideal for veneer work and panel bonding From location The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Shipping available at extra cost! Godpfx Afsyu Sifs Ejir

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Giodpfx Asyw Rknof Eer Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Edge thickness: 0.2-12 mm Feed rate: 12 m/min Glue application roller, synchronous and counter-rotating Automatic infeed fence Jointing End trimming up to 3 mm Flush milling at 15, 30, 45 degrees Radius milling R 2 - R 5 Flush cutting Radius pull scraper Schwabbl polishing unit Extendable roller support Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg Godpfxow Ni Nre Af Esir

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Year of manufacture: 1991 Godsyutxnspfx Af Eeir Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: used, OTT Tornado FÜ + PU PLC control unit with 7" TFT color touch display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit - jointing Fully automatic roller magazine Fully automatic edge band magazine Pneumatic flush trimming 0-3° Flush milling - 12mm Radius milling R-2, R-5 Chamfer milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof enclosure with central extraction Cleaning set with 4-way spray system, high-precision buffing unit, and glide agent spraying system Gjdsywuvnspfx Af Ejir First delivered in 2006 Machine is WORKSHOP TESTED and in TOP CONDITION Available ex stock Lieboch

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Gjdoywiyzjpfx Af Ejir

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Gisdpfx Aoywrzbsf Eer Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Working width: 130 cm Working height: 41 cm Giedpfxeygxblo Af Ejr Length: 255 cm Electrically heated grates 4 pistons 18 kW

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Wide belt sander! Giedpfjyv Uvlex Af Ejr

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize Gedjhy Tlrspfx Af Esir premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter Gijdpfx Aowiwnqjf Eor