Rollengang Paul

Paul

Condition: good (used), Obrzynarko wielopiła Paul Kme2 wysokosc ciecia 125mm szer 750mm silnik 37kw 2 pily ruchome stoł podawczy stol odbiorczy Isdpfx Aovn Aunehuetb

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm Itjdpfjx S Ix Ejx Ahujb - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Iodpfxsxrr S Hs Ahuotb Power consumption 11.4 kw Control software CNC MAXI 5 Premium Line is in full working condition

Condition: used, Paul double-edged planer KM2, good condition, 9.6 kW, cutting length 590 mm, cutting height 80 mm Iodpox H Uhvjfx Ahuetb Subject to price changes, errors and misprints excepted.

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF Iodpfx Aei Dylfohustb − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: used, Year of construction: 1972, functionality: fully functional, pressing force: 240 t, opening width: 150 mm, plate length: 3,300 mm, working height: 900 mm, plate width: 1,400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating plate size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² – Number of steel heating plates: 2 pieces – Heating plate thickness approx. 40 mm – Number of hydraulic cylinders: 6 pieces – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm – 4-way rack and pinion guide – Working height approx. 900 mm – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of the press – Conveyor belt approx. 7100 x 1420 mm – Pneumatic control – Roller track (disc rollers) in front of/above the loading station – Roller track approx. 2000 x 1400 mm – Disc rollers running in a water bath – Roller conveyor with mobile support feet Ijdpfx Aex Nr Edehustb – Outfeed roller conveyor approx. 3300 x 1400 mm – Hot oil boiler HG 80 for heat transfer oil – Heating capacity approx. 80,000 WE/h – Oil burner for light fuel oil – Year of manufacture: 1972, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by appointment

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Itjdpjtx A Sxofx Ahujb Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers as good as new condition

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence Itedpfxouqdwxe Ahuob HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Itsdpfx Aoxqa Slohueb Rotational speed: 571 rpm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Ijdpfex H Uaxsx Ahuotb Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW