PERZL HVZ 110 timber loading grapple - 1 unit

Perzl Maschinenbau

Condition: used, The hydraulic timber grapple, also known as a loading clamp, is ideally suited for front-end loader or crane mounting. With the hydraulic loading clamp, you can load and stack firewood, brushwood, and long logs. The work can be carried out much faster with the grapple. And this can be done without any physical effort and without getting off the tractor. All moving parts are equipped with 40-mm bolts, grease nipples, and specially manufactured plastic bushings with high wear resistance. All clamps are made from high-quality fine-grained steel 700. - With double-acting hydraulic connection - Complete with special mounting arm, "bent" for EURO quick-release frame, with straight toothed rack - Incl. universal joint and 4.5-ton flange rotor - Incl. 4 hydraulic hoses Itedpfo Aanchjx Ag Aen - Fully assembled on the clamp Technical data: - Quality "Made in Germany" by PERZL - Opening width 1,300 mm - Smallest diameter 90 mm - Operating pressure 200 bar - Closing force 7.5 t

Condition: used, The hydraulic wood grapple, also known as a loading clamp, is ideally suited for front-end loader or crane mounting. With the hydraulic loading clamp, you can load and stack firewood, branches, and long logs. The work can be carried out much faster with the grapple. And this without any physical exertion and without having to dismount from the tractor. All moving parts are equipped with 40 mm bolts, grease nipples, and specially manufactured plastic bushings with high wear resistance. All clamps are made of high-quality fine-grain steel 700. - With double-acting hydraulic connection - Complete with mounting arm for EURO quick-release frame, with straight rack - Incl. universal joint and 4.5 t flange rotor Itedpfx Ae Aam D Rog Asn - Incl. 4 hydraulic hoses - Fully assembled on the clamp Technical data: - Quality "Made in Germany" by PERZL - Opening width 1,300 mm - Smallest diameter 90 mm - Operating pressure 200 bar - Closing force 7.5 t

Condition: used, - The double fork consists of two forks with an additional frame. - Hydraulically adjustable from 840 to 1250 mm. - Standard equipment includes a 3-point linkage for rear or front hydraulics. Iodpfx As Aal Eaeg Aotn - 2 single-acting hydraulic connections.

Condition: used, - Hydraulically adjustable from 840 to 1250 mm - Standard equipment includes a 3-point linkage for rear or front hydraulics - Single-acting hydraulic connection Itsdpfxj Aakzts Ag Aon (Fig. showing the catch hook for quick-change frames .201)

Condition: used, Description The PERZL HVZ 110 timber grapple with the MS 03 quick-change system combines high functionality and robust construction. It is made of high-strength fine-grained steel QSTE700 and is a quality product from Germany. With a universal joint and a 3 t continuous rotary rotor, which is driven by a shaft, it enables precise operation. The grapple has a weight of 80 kg, an opening width of 1,100 mm, and an impressive closing force of 7.5 t. It can be used for a minimum diameter of 80 mm and is compatible with a 3 t rotor and a 4-hole mounting plate. In addition, it is fully assembled and is supplied including hydraulic hoses, which means that the mounting arm with a toothed rack (straight) can be used immediately. The grapple is ideally suited for front loaders with a power output of up to 75 hp and operates at an operating pressure of 200 bar. - With MS03 quick-change system - Universal joint and 3 t continuous rotary rotor with shaft - Made of high-strength fine-grained steel QSTE700 - Quality product from PERZL, manufactured in Germany - Incl. hydraulic hoses - Fully assembled on the grapple Itsdpfx Aj Aai Hhsg Aon - Mounting arm with toothed rack (straight)

Condition: used, - Fork carriage, ISO FEM II - 140 cm wide Iedpfxe Aag Rdo Ag Ajtn - Load capacity 2,000 kg - Fork length 1.10 m - Standard equipment includes a locking hook for quick-change frames (EURO standard) - Pallet fork with open frame design; particularly robust and torsion-resistant - Tested tines of German manufacture with FEM II carriage, approximately 410 mm high

Condition: used, Description The PERZL HVZ-R 150/33 grapple for brushwood is characterized by its robust construction made of high-strength, fine-grained steel QSTE700 and is a quality product “Made in Germany”. It features a double-acting hydraulic connection without hoses and an opening width of 1,500 mm. With a self-weight of 125 kg, the grapple offers an impressive closing force of 9.5 tons. The mounting plate is equipped with 4 holes for a rotator, making the grapple ideal for front loaders with up to 120 hp. Itodpfx As Aag Hreg Aon - With double-acting hydraulic connection without hoses - Made of high-strength, fine-grained steel QSTE700 - Quality product from PERZL, manufactured in Germany - Mounting plate with 4 holes for a rotator - Opening width: 1,500 mm - Closing force: 9.5 t - For front loaders up to 120 hp, forestry trailers, and mini excavators up to 7 t

Condition: used, Description The PERZL HVZ 130 log grapple is a hydraulic grapple ideal for mounting on front loaders or cranes. With an opening width of 1300 mm, it enables efficient loading and stacking of firewood, brushwood, and long logs, without the operator having to dismount from the tractor or exert much force. The grapple is equipped with a continuous rotation rotor with a pulling force of 3 tons and offers a high clamping force of 7.5 tons. It is made of high-quality fine-grained steel QSTE700, which guarantees its durability and resilience. All moving parts are fitted with robust 40 mm bolts and grease nipples to facilitate maintenance. The product is fully assembled and includes a flange plate and two hoses for connecting the rotor. With a net weight of 95 kg and a total weight of 180 kg, the grapple operates at an operating pressure of 200 bar. Manufactured in Germany, the PERZL HVZ 130 offers excellent quality and performance for professional applications. - With double-acting hydraulic connection - With continuous rotation rotor with shaft, 3 t pulling force - Flange plate and 2 hoses for rotor on grapple - Made of high-strength fine-grained steel QSTE700 Itedpfxe Aag Amj Ag Aon - High-quality product from PERZL, made in Germany - Fully assembled on grapple

Condition: used, Description The PERZL HVZ 130 wood handling grapple is a hydraulic grapple optimally suited for use on front loaders or cranes. With an opening width of 1300 mm and a closing force of 7.5 tons, it enables effortless loading and stacking of firewood, brushwood, and long logs – without any physical effort and without having to leave the vehicle. The grapple is made of high-quality fine-grain steel (QSTE700) and is equipped with robust 40 mm bolts, grease nipples, and special plastic bushings, which ensure high wear resistance. With a dead weight of 95 kg, it is suitable for tractors up to 90 hp. The flange rotor has a load capacity of 3 tons. The product is delivered fully assembled. The operating pressure of 200 bar guarantees reliable and efficient operation. - With 3 t flange rotor - 2 hoses for rotor to grapple connection - Made of high-strength fine-grain steel QSTE700 Iodpfxj Aag Age Ag Ajtn - Quality product from PERZL, manufactured in Germany - Fully assembled on the grapple The PERZL HVZ 130 is therefore a high-quality product from Germany that significantly simplifies wood handling!

Condition: used, for RZ 180 with cable winch. Itodpfx Ags Aagt Eo Asn