Press brake

Placke EQPB 6 30t x 1.020mm P781

Prepared for automated operation!

The single-cylinder Quality Press Brake, or EQPB for short, is the smallest model in the Placke range of press brakes. It is a very fast, robust, and quiet machine specifically designed for the production of small parts. All manufacturing processes, from the hydraulic cylinder to the control cabinet construction, take place in-house. Through the use of state-of-the-art technology, combined with many years of experience in the field of forming technology, the EQPB series enables you to perform bending operations at a high level.
Even the standard basic model is a fully functional press brake. Thanks to this combination of safety, reliability, and efficiency, coupled with user-friendly operation, we can meet the highest demands and achieve the greatest precision in the bending process.

Press force: 300 kN (30 t)
Working length: 1,020 mm
Distance between uprights: 850 mm
Installed height: 350 mm
Overhang: 255 mm
Ram stroke: 165 mm
Height of lower bed above the floor: 947 mm
Rapid traverse max.: 250 mm/s
Pressing traverse max.: 9.8 mm/s
Retraction max.: 160 mm/s
Ram positioning accuracy: ± 0.01 mm
Motor power: 3.0 kW
Hydraulic oil tank capacity: 90 l
Operating voltage: 400 V / 3 Ph / 50 Hz
Machine weight: approx. 3.8 t

Description:
> Machine body
Steel S 355 N, design based on FEM analysis
Torsionally rigid welded construction, floor-standing
2-component structural paint, RAL 7004 / 7016
> Hydraulics & Upper Beam
Proportional control valve
Low-noise internal gear pump
Hjdpfxsz Hnyme Algou
Roller guide, Heidenhain scale
> Tooling
WILA pneumatic, top NSCL-II-SL-STL, bottom OB-II-SL-STL
Smart Tool Locator: LED display of tool position
Y1/Y2 correction, sitting or standing
> Backgauge 4-axis
X-axis 950 mm, 800 mm/s, ± 0.01 mm
R-axis 215 mm, 150 mm/s, ± 0.01 mm
Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm
> Angle correction VCA
Fully automatic camera-laser system
Measures the outer angle on the sheet metal
Two force sensors for springback measurement
> Control Delem DA 66S
24″ touchscreen on the swivel arm
2D programming, 3D visualization
DXF import, tandem operation
> Robot preparation
Large control cabinet, Modbus interface press-robot
Modular PLC PSS 4000
Stop finger with workpiece detection
> Safety & Efficiency
CE-compliant, Pilz safety PLC
TFS laser light curtain, rear light curtain
eco-MODE start-stop automatic

With this equipment, the machine is prepared for automated operation.

The listing was translated automatically. Translation errors are possible.