GUILLOTINE

Polar Mohr 78 ED

Condition: used, Year of construction: 1999, Display, Program, Table left, Table right 2 spare knives Dcjdpfx Ajyanmdecmsi short-term available

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, W&H Triumph 1 Djdpfx Aow Nvi Sscmsci 3 layers Photocell for preprinted reels

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Dcedpfx Aov Nv Svecmei Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, POLAR 78 paper cutter, fully overhauled – year 1999 Dedpfx Aoy Sf Ahocmoci

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Faster than the equivalent sliding-table press, the fixed-table Printmaster is perfect for medium and long production runs, delivering excellent quality results with virtually any material up to 4 mm thick. And because the machine prints incredibly fast, the Printmaster is undoubtedly the best on the market. Among its many sophisticated features is the patented dual gripper system that ensures perfect registration and quiet operation. The Printmaster can also be equipped with various optional systems and accessories that make it even more versatile, faster and easier to use. Integrated PLC control system. Independent LCD touch panel with setting and monitoring of printing parameters: - Job parameter storage system. - settings diagnostics. Dodpouptf Asfx Acmeci - Variable stroke lengths of scraper and flood coater. - Adjustable clamp, scraper and flood coater speeds. Motorized off-axis contact adjustment. Hardened, self-balancing stop points combined with "locking" fingers for material control. Maintenance-free toothed belt drive for the scraper carriage. Double gripper bar shuttle system. Folding feed table. Fiber-optic registration control. Prepared for the addition of a feeder. High-strength steel lifting columns. Anodized aluminum work surface. Printing frame insertion. Multi-purpose self-adapting clamps. Pneumatic scraper pressure equalizer. Pneumatic scraper and flood coater changeover. Pneumatic clamping of printing frame and back bars. Horizontal flooding. Choice of flooding: immediate or delayed. Timer for machine stop to allow peeling action. Adjustable peeling at 6 levels. Adjustable blowing system. Foot pedal.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device Dcjdpfx Acjrllhkemei All data without guarantee

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Dodpjvy Aipofx Acmoci Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) Dcjdpewh Rvrjfx Acmsi -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

Condition: good (used), Year of construction: 2007, Format: max 340 x 260 mm; min 90 x 115 mm Format (without overfold): max 340 x 250 mm; min 90 x 115 mm Overfold: max 15 mm Final fold: min 6 mm Pre-fold: min 8 mm Stapling sheet formats: max 340 x 260 mm; min 210 x 155 mm Stitching thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h Equipment Collecting chain & feeder - 8 stations Collecting chain - 8 Substructure simple - 6 Feeders 416 - Fabric gluer 423 Stapling station - Stitching station 430 - 15" inch chain pitch - Stitching wire unwinding device - Thickness control / Plus-Minus - 4 stitching heads Three-knife trimmer - Three-knife trimmer 426 Knife - 2 knives Delivery - Stacker Robusto Optional accessories: --- not included in the scope of delivery --- - Crane system - Bar feeder - Print roller feeder - Additional stations - card gluer - various transport lines - compensating stacker Dcodpeqrqxkefx Acmoi - automatic tying machines - Wrapping machines - palletizer

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display Dcodpfx Acszgdafomji 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.