Paper cutting machine

Polar 115 XT - AT

Condition: like new (used), Year of construction: 2007, Paper cutting machine • AT = Autotrim = front table trimming for waste disposal • Waste container for Autotrim under front table • Digital programming automation • Color touch-screen monitor • Air-cushion cutting table • 2 large side tables • 2 central air corners • All tables chromed with air-cushion system • Safety system Gtodpfxjx R Tpgo Aacju

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Fully overhauled Godjriui Tspfx Aacstu

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge Gedpfjqqkvqjx Aacstu - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools - Standard accessories

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Sakurai Maestro MF 80 Max. sheet size (mm): 800 x 600 Min. print area (mm): 350 x 270 Max. print area (mm): 800 x 585 Material thickness (mm): 0.1 - 3 mm Max. speed (IPH): 1,000 Max. frame size (mm): 1,100 x 1,000 Cleaning and antistatic bar Gtodpfx Ajx Nn R Neacsu Heating tunnel Cooling tunnel Automatic delivery system

Year of construction: 2007, condition: excellent (used), functionality: fully functional, For sale 4-colour offset rotary press GOSS M 600 C for printing magazines, books and advertising prints in large editions from 2007, with a mechanical capacity of 55,000 copies/hour. Equipment: Gjdoxp Ebcjpfx Aacstu - JF-55 faller - OMNICOM control system - Autoplate – automatic plate changing - QUADTECH registration and cut-off control system - Closed colour loop - CCS ICON QUADTECH - Automatic blanket cleaning - Baldwin - Print silicone application - Gluing system for inserts – Robatech - Receiving and cutting of inserts - Muller Martini - Cross Stacker - Muller Martini - Central trimming waste extraction - Ecocool dryer - with integrated afterburner and heat recovery - Shaftless drive

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Faster than the equivalent sliding-table press, the fixed-table Printmaster is perfect for medium and long production runs, delivering excellent quality results with virtually any material up to 4 mm thick. And because the machine prints incredibly fast, the Printmaster is undoubtedly the best on the market. Among its many sophisticated features is the patented dual gripper system that ensures perfect registration and quiet operation. The Printmaster can also be equipped with various optional systems and accessories that make it even more versatile, faster and easier to use. Integrated PLC control system. Independent LCD touch panel with setting and monitoring of printing parameters: - Job parameter storage system. - settings diagnostics. - Variable stroke lengths of scraper and flood coater. - Adjustable clamp, scraper and flood coater speeds. Motorized off-axis contact adjustment. Hardened, self-balancing stop points combined with "locking" fingers for material control. Maintenance-free toothed belt drive for the scraper carriage. Double gripper bar shuttle system. Folding feed table. Fiber-optic registration control. Prepared for the addition of a feeder. High-strength steel lifting columns. Anodized aluminum work surface. Printing frame insertion. Multi-purpose self-adapting clamps. Pneumatic scraper pressure equalizer. Pneumatic scraper and flood coater changeover. Pneumatic clamping of printing frame and back bars. Horizontal flooding. Choice of flooding: immediate or delayed. Timer for machine stop to allow peeling action. Gjdpfx Ajuptf Aeacjtu Adjustable peeling at 6 levels. Adjustable blowing system. Foot pedal.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Gtsdpsvy Aipefx Aacju Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: Gtedorllhkepfx Aacju pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee

Condition: good (used), Year of construction: 1997, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: screen printing machine - Year of manufacture: 1997 - Equipment: • Mabeg feeder, model MS • SPS dryer, type UV Top 1200, year 1993 • SPS Rehmus stacking unit, type Autostack S-02, year 1993 • Steel platform and tread plate on pallets • Control cabinet Gedpfx Aoxby Smjacjtu • Screen printing frames - Area of application: industrial screen printing, packaging, labels, special applications

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, Machine for making paper bags with square bottom Bag width: 45 mm - 125 mm Tube length: 150 mm - 340 mm Gusset: 30 mm - 75 mm Photocell Max reel width: 400 mm In-line 4-color flexo printing unit Gtsdpfx Aew Nvi Seacju