Heavy-Duty Lathe PORĘBA TCG 125 X 4000

Poreba TCG 125 X 4000

POREBA conventional heavy duty lathe
Model: TCG 125 x 4000.

The machine was designed by POREBA as a special-purpose machine for the production of a cylindrical roller for a steel mill.


LATHE in very good condition, renovated in 2010, new electrical cabinet!!
Perfect bed, Quiet headstock all ranges work!
The machine is connected to electricity, so tests are possible,

Model: TCG 125/5000
Manufacturer: POREBA
Location Wroclaw Poland



Technical data:

Turning diameter over bed: 1250 mm
Turning diameter with carriage: 940 mm
Four-jaw chuck diameter: 1250 mm
Chuck working range min/max: 230/1050 mm
Distance between centers: 4000 mm
headstock
Spindle bore: 105 mm
Spindle seat: cyl. 105
Spindle diameter in the front bearing: 320 mm
Number of spindle speeds: 24
General spindle speed range: 1.6 - 315 rpm
Spindle drive motor power: kW 75
Maximum spindle torque: 63000Nm
Bed
Bed width: 1100 mm
Slide length: 1320mm
Support width: 550mm
Slide travel: 800 mm
Tool guide travel: 600 mm
Number of feed rates for each range: 20
General longitudinal feed speed range: 0.18 - 160 mm / rev
Longitudinal feed speed range at:
- large spindle speed range: 0.18 - 5 mm / rev
- middle spindle speed range: 0.18 - 40 mm / rev
- low spindle speed range: 0.72 - 160 mm / rev
General range of metric threads: 1-192 mm
General range of inch threads: 30 - 1/8 tpi
General feed rate range mm per minute: 11.2 - 320 mm / min.
Rapid longitudinal traverse: 4000 mm / min
Fast feed motor power: 4 kW

Tailstock:

Tailstock quill diameter: 280 mm
Tailstock spindle diameter in front bearing: 170 mm
Tailstock sleeve stroke: 200 mm
Rapid feed of the tailstock quill: 300 mm / min
Rapid feed of the tailstock along the bed: 1500 mm / min

Overall dimensions and weight:

Machine length: 9700 mm
Lathe width: 2200 mm
Lathe height: 1930 mm
Maximum workpiece weight in the chuck: 4 t
Maximum part weight in centers
- without support 30 t
- with one steady rest 35 t
- with two supports 40 t
Machine weight: 36 t

The heavy lathe Poręba TCG 125 x 4000 was manufactured in Poland in 1984 by Fabryka Obrabiarek Heavy "PONAR - ZAWIERCIE" plant No. 1 "PORĘBA".
Nodjld Ughspfx Ac Hedf
The TCG 125 heavy center lathe is a universal machine tool that enables rough and finish turning, drilling, threading, taper turning, boring, turning and copying of heavy workpieces with one clamping.
The Poręba TCG 125 lathe is designed for machining workpieces with diameters up to 1250 mm and weights up to 30,000 kg in centers (with rests up to 40,000 kg). The construction layout and rigidity of the structure allows turning with large chip cross-sections and ensures high smoothness with minimal ovalization of the workpiece.
The monolithic rigid bed is equipped with hardened pads.
The great advantage of the machine is the modular design, thanks to which we can easily increase both the diameter and the turning length. The length of turning is increased by adding another part of the bed and can be extended to virtually any length. Turning diameter is increased by installing headstock, tool holder and tailstock extension blocks. All modules can be ordered from the machine manufacturer.