Universal lathe machine
Poreba TPK 80 x 4000

Name: Poreba TPK 80 x 4000
Brand: Poreba
Availability: InStock

Year of construction

2026

Condition

Used (fully functional)

Location

Bydgoszcz

Universal lathe machine Poreba TPK 80 x 4000

Basic data

Machine type:: Universal lathe machine

Manufacturer:: Poreba

Model:: TPK 80 x 4000

Year of construction:: 2026

Condition:: refurbished (used)

Functionality:: fully functional

Price & Location

Location:: ul. Kolbego 40, 85-433 Bydgoszcz, Polska

Call

Technical details

Spindles

Spindle bore:

95 mm

Processable material / products

Workpiece weight (max.):

6,000 kg

Further details

Turning diameter:

800 mm

Turning diameter over bed slide:

800 mm

Turning diameter over top slide:

530 mm

Turning length:

4,000 mm

Details about the offer

Listing ID:: A218-85778

Update:: 08.05.2026

Description

The PORĘBA TPK-80/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements.

The machine is covered by a full 12-month warranty on spare parts and electrical components.

Availability: available on stock, under power, ready for inspection

Technical data:

- distance between centers/turning length: 4000 mm
- turning diameter over bed: 800 mm
- turning diameter over support: 530 mm
- turning diameter in bridge recess: 1080 mm
- power on compound slide
- spindle bore diameter: 95 mm
- maximum workpiece weight between centers: 6,000 kg
- maximum workpiece weight between centers + 1 steady: 7,500 kg
- maximum workpiece weight between centers + 2 steadies: 9,000 kg
- number of spindle speeds: 21
- range of rotational speeds (rpm): 8 - 800
- number of feeds: 80
- range of feeds (mm/rev):
longitudinal: 0.1 – 12,8
transverse: 0.05 – 6,4
- engine power: 16/22 kW (1st gear / 2nd gear)
- overall dimensions:
total length: 6000 mm
width: 1800 mm
Nlsdpfoy N R Iwjx Ac Dsh
height: 1800 mm
total weight: 6200 kg

Standard equipment: tailstock, coolant pump, tool post, chuck cover

Additional equipment available at extra charge:

- 3- or 4-jaw chucks, various diameters and variants
- Digital readout on 2 axes with assembly and calibration
- Steady rest, 40-400 mm, with rollers
- Steady rest, 400-600 mm, with rollers
- MULTIFIX quick change tool post

Seller

Registered since: 2018

25 listings online

Call

Send inquiry

Telephone & Fax

+48 607 3... show

These listings may also fit your interest.

Listing

Vertical Turret Lathe - Single Column SCHIESS MOWEG BERTHIEZ TFM 125

Düsseldorf

7,655 km

Vertical Turret Lathe - Single Column
SCHIESS MOWEGBERTHIEZ TFM 125

Call

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control SIEMENS - 840 D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min Nlsdpsvp Shgsfx Ac Djh feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

See details

Listing

SKODA W250H horizontal boring and milling machine Skoda W250H

Poland

8,335 km

SKODA W250H horizontal boring and milling machine
SkodaW250H

Call

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, spindle speed (max.): 700 rpm, feed length X-axis: 15,000 mm, feed length Y-axis: 5,150 mm, feed length Z-axis: 1,600 mm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 2,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 137,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Nlsdpjzrwq Isfx Ac Deh Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Cooling system with coolant Rotary table 4000x3550 3 x angular heads

See details

Listing

Ireland

6,779 km

Roll Grinder
ChurchillRoll Grinder

€110,000

ONO plus VAT

Call

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Nljdpjxvrptjfx Ac Doh Swing 1600 mm Centres 5200 mm Cambering Wheel Size 26” x 2” Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect.

See details

Listing

Vertical Turret Lathe - Double Column BLANSKO 25a

Zele

7,503 km

Vertical Turret Lathe - Double Column
BLANSKO25a

Call

Condition: used, faceplate diameter 2500 mm swing diameter 2700 mm turning height 1600 mm turning speed range - milling 1,18 - 32,5 U/min turning speed range - milling 4,25 - 117 U/min workpiece weight 10000 kg side head - cross travel 800 mm ram head - cross travel 45 degrees - 1000 mm ram head - cross travel 30 degrees - 1000 mm Nsdpfx Aceyuqidj Djlh total power requirement 80 kW 2-Axis D.R.O. 5 positions turret

See details

Listing

Most 1

8,088 km

Vertical turret lathe
SkodaSK 125

€250,000

Fixed price plus VAT

Call

Condition: used, functionality: fully functional, We are selling this machine. It is connected and can be tested. A video of the machine can be sent via the WhatsApp application. Documentation for the machine is available. Speeds: 1st range: 0.35-3.5 rpm 2nd range: 1.4-14 rpm Drive: 2 regulating motors, each with 120 kW, powered by a 240 kW Ward-Leonard converter. Diameter of the clamping plate: 8,000 mm Nsdpsydqfdjfx Ac Djlh Largest turning diameter: 12,500 mm Turning height: 2,200 mm The machine underwent a major overhaul and modernization in 1991. Maximum workpiece weight: 200,000 kg Machine weight: 550,000 kg Please submit your offer.

See details

Listing

CNC vertical turret lathe with C-axis and milling function SCHIESS FRORIEP 32 DS250/320

Mamer

7,709 km

CNC vertical turret lathe with C-axis and milling function
SCHIESS FRORIEP32 DS250/320

Call

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Nodjzdk A Uspfx Ac Delh Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

See details

Listing

Germany

7,870 km

Gear Cutting Machine
WMWZFWZ 1250/3

Call

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Nedpoy Hk T Iofx Ac Dslh

See details

Listing

Radial drilling machine WMW HECKERT BR 40/2 x 1250

Weiterstadt

7,845 km

Radial drilling machine
WMW HECKERTBR 40/2 x 1250

Call

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Nledpfxox U Ects Ac Djh Floor space required approx.: 2.2 x 1.0 x 2.8 m

See details

Listing

Surface Grinding Machine WMW MEUSELWITZ SFW 400/2

Germany

7,963 km

Surface Grinding Machine
WMW MEUSELWITZSFW 400/2

Call

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) Nlodpfx Ajx Afpajc Deh -hydr. aggregate -control cabinet *

See details

Listing

Zabrze

8,387 km

Table boring mill
UNIONBFT 110 CNC

Call

Condition: used, Year of construction: 1997, Spindle diameter: 110 mm Travel: X: 1985 mm Nodpfx Acjzy E Svo Djlh Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

See details